VM Server 2 as an archiving solution (single Server Instances, long-term use 10 years and more)

Similar Questions

• OfficeJet J4660 all-in-One on Windows Server 2003 R2 - cannot use the scan and fax functionality

  Hello everyone,

  I recently purchased the Officejet J4660 AIO.  I had to install on our Windows Server 2003 R2 (with all latest updates), being present on the CD of driver for Win XP, I had to download the latest driver (OJJ4600_Corporate_ENU_10 - 55.8 MB) from the HP site.  During installation, ONLY the printer driver has been installed.  I can't use the SCAN function or the FAX software.  In fact, the icons for these two programs not created in the HP program group.  No error message appeared well while installing.

  All the world was a program similar and been able to get a work around for this?  I would like to use AIO printer that I bought, not only on the side of impression of it.

  Any help will be much appreciated.

  Thank you.

  Salim

  I think that the Acquisition of Image Windows (WIA) service is disabled in your system. Unlike Windows XP or Vista, in most Windows Server systems, this service is disabled by default. You can activate it in this way:

  1. right click on my computer and select manage.

  2. Select "Applications and Services-> Services";

  3. find Windows Image Acquisition (WIA), right click and select Properties.

  4. Select "auto" in the "Startup Type" list box in the "Général" tab

  5. in the situation 'Services', click 'start '.

• Support best suited to long-term archiving purposes?

  Browsing the Internet, I have met many (and partly contradictory) suggestions for the 'best' (longer, with good error correction algorithm, etc.) DVD media. The final conclusion of one of the most competent sounding tutorial (http://adterrasperaspera.com/blog/2006/10/30/how-to-choose-cddvd-archival-media) is: «...» So what I use? Because of the quality of senior Taiyo Yuden and superior design of DVD + R media, I use only Taiyo Yuden DVD + R media. I recommend this media for all who wish to retain their data for a long, long time. "Based on the high level of expertise of many users in these forums, I would appreciate greatly any suggestions/comments/references. Thanks, as always, CAI.

  I also use Taiyo Yuden and Verbatim. I have a DVD-5 in my DVD-9 in Verbatim and Taiyo Yuden. For delivery, I've never had a return.

  Now, one of the problems, looking to the future, it is that a not-quite-real world of tests need to be developed to accelerate the "aging", often using computer models to simulate aging. How long will they last? Most of the laboratories indicate 50 years and more, which is not bad.

  I do not recommend using cases, which do not allow the surface disk connect with any surface in this case, essentially holding it away. I recommend also to store many elements of the environment and in particular UV rays.

  Some, like adhesive labels, but I'm not a fan and will use the Eposn inks. Now, how long those who will last before doing damage? Who knows?

  Good luck

  Hunt

• SQL Server 2008 R2 developer: this version include and allow to use ssrs, ssis and ssas intended for a single user?

  This version includes and allow to use ssrs, ssis and ssas intended for a single user

  Hi mikeyjoy,

  For questions about SQL Server, visit the Forums for SQL Server.

  Thanks for posting your question in the Microsoft answers Forum.

• Network error mystery - Windows cannot access \\server\users when you use the netbios name, but works fine when you use the full domain name.

  Hi all:

  Mystery - I have a Win 7 work company that cannot access a particular action.  I get the following error-"you are not allowed to access \\server\users.  Contact your network administrator to request access.  However, these users can access these files successfully on other computers, and also if I use the fqdn or the IP instead of the "netbios name server", it connects successfully.

  Environment:

  -Workstation and server at the same time in the same AD Windows 2008 r2 domain.

  -All users, admin and non admin, cannot access this share when connecting to this computer only.

  -ACCESS to the other actions on the same server, as well as actions on other servers.

  -The biggest mystery to me - if I type the FQDN, \\server.domain.local\users, it works!  What the?

  I tried:

  -Deletion of the domain and add it again, no improvement.

  -Check Event Viewer, nothing jumps (not red or yellow).

  -Enabled auditing for access to objects on the server, it does not show a failure in the security event log.

  -Turn off the firewall of my computer.

  -UN-share and re - share the directory.

  -Give everyone full control (the fact that it works well with de facto authorities a little full domain name, a candidate little likely, but I have an open mind).

  For anyone wishing to offer their 'help' by asking me to make some sort of workaround as re - install windows or turn off netbios or use only of the full domain name here on out or whatever, please Don ' t bother.  I appreciate your help, but I am quite able to reinstall and I'm not interested unique hacks that affect this otherwise network well managed, I'm looking for a solution that will allow me to save time and is a long-term solution.

  In my view, that a key point here maybe I can connect successfully using \\server.domain.local\users, but not \\server\users.  Someone at - it some thoughts?

  In DNS server of youe, go to the area in question and in the use of select search before Wins wins tab and enter the address of your wins server if you have one. If not, install one.

• I use Windows 7 and I am not able to print several different images on a single page.

  When I try to print photos from the 'My pictures' library, I use the following steps:

  1. turn the photo highlight

  2. click on 'print '.

  3. in the window that says: "How do you want to print your photos? I choose the number of photos I want per page, for example 3 x 5.

  4. when I try to add a picture DIFFERENT from my library so that I can print several different photos on this page of photos of 3 x 5, it simply replaces the previous photo. How can I get there?

  Thank you.

  Original title: I use Windows 7 and I am not able to print several different images on a single page. The answer posted here from 8/11 includes a link that does not work.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  What program you want to use?

  We will try to print in a different way and check.
   
  Open Paint and then do a collage of different photos then save it then open it in their program and print.
   

  To print the image in Microsoft Paint, steps to follow:

  a. Click Start, in the search box, type in the paint.

  b. open the document you want to print.

  c. select print and check.

   

  With the help of paint

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

   
  Hope this information helps. Please reply back with the

• 9.0.2 CF multi server config, IIS site uses the connector bad, how do I change the connector to point to its own instance of CF

  Hello

  Yesterday, I found that an IIS site that is supposed to be connected to its own instance of CF is actually connected to another instance of CF. Our configuration is the following

  Windows Server 2008 R2, Coldfusion 9.0.2 Multi server enterprise edition, IIS 7

  Instances of ColdFusion: P1, P2, V1

  Clusters: Primaire1: contains P1 & P2

  Site1 IIS Web site is connected to the Cluster primaire1

  Site2 IIS Web site is connected instance CF V1

  I myself stopped instance CF V1, but IIS V1 site was still running. After much digging, I found this site V1 is not actually connected to the CF P1, an instance of CF V1 instance. I used the web site1 at CF instance V1 connection configuration tool. In IIS the JWildCardHandler site1 points to \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. JWildCardHandler for site2 points to the same directory \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. Here is my dilemma. How can I get JWildCardHandler site2 to point to its own folder under \JRun4\lib\wsconfig, say 14 instead of 3. I don't want to use the web config tool becauseI don't know if it will delete the folder ...\webconfig\3 if another site is still using it. I saw the web configuration tool remove the folder when you remove this connector in the tool.

  So I thought that I would try to manually configure the connectors. That's what I did

  Copy the folder wsconfig\3 wsconfig\14

  en...\wsconfig\wsconfig.properties - ensured site2 exist and referenced instance CF V1

  ...\wsconfig\14\jrun_iis6_wildcard.ini

  serverstore = /JRun4/lib/wsconfig/14jrunserver.store

  127.0.0.1:51007 = bootstrap - 51007 is the port of the proxy that the JRun Management Console is instance CF V1

  ... \wsconfig\jrunserver. Store

  proxyservers = (in file #3 set for P1 and P2 proxy ports)

  
  

  Then, I went into IIS and changed JWildCardHandler from site2 to \JRun4\lib\wsconfig\14 \jrun_iis6_wildcard.dll instead of \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. After you restart IIS sites site1 or site2 came. I went back in and came back JWildCardHandler back to the \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll site2 and they both come. I think that I restarted CF both times, but really forget that I was in a bit of fashion panic.

  
  

  Is that what sounds like it should work? Does anyone know of any files that I missed trying to configure site2 to point to the CF V1 instance? Any ideas are appreciated.

  
  

  Joe

  
  

  What I understood why 2 Web sites were using the same instance of Coldfusion. 2 Web sites share the same files, sharing the same web.config file. Change the JWildCardHandler, in IIS, for a website has changed the web.config file that is shared by both sites. If I find a way around it, I'll post my solution in case anyone else runs into this situation.

  Joe

• By dictating the long notes, using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  By dictating the long notes on Mac using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  For long notes, you are better to use regular old dictation - under Mac OS for a few years now, Siri is not mandatory.

  To activate it, go to "System Preferences"-> keyboard-> dictation. Once enabled, you can press the "Fn" key twice to activate and dictate the long notes in any application.

  Siri is optimized for short, quick things. I don't think that you can change, you just use the method that is better to listen to what you want to do at the time (short notes, using Siri. Long notes, use dictation).

• I get a notification to update when you sign in to firefox. When you try to update you get the message "connection to Server", which can go about 4 hours and never update

  I get a notification to update when you connect to firefox on my mac. When you try to update, I get a message "connect to Server" which can go over 4 hours and never update. It is most annoying. How can I remove that annoying popup which does not in any case all in ensuring that I have updated to the latest version?

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  Latest news of Apple posted, incredibly, ELSEWHERE other than on Apple own site Web/community technical forums.

  Apparently Apple has stopped now updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  Someone just posted in another thread that it may be active again. I can't check it, because they haven't posted a link about her being active again, and I've already updated all my devices, I can't be sure. Maybe something to watch.

• RIO crashes when you use tcp communication and web server

  Hello

  my controller cRIO crashes after a short time (usually less than a minute), when I use simultaneously to the web server (to interact with a remote control) and make some tcp communication (using STM 2.0 library) for data logging. Is it a problem of overall performance of the controller, or a problem of band network bandwidth (I'm happy to send some values every 100ms), or a programming problem; in the latter case, what should I do to make the system more stable?

  Kind regards

  PS: I use a cRIO 9022 with LV 2009f2 + RT and NOR-RIO 3.3.0

  Hello

  You can try with a simple while loop + delay instead of loop timed for TCP communication loop.

  Concerning

• I configure to do mediation Lync server send INVITATION with parameter URI Conference and isfocus?

  I have the standard edition Lync Server 2013 with mediation server had TO connect via sip trunk; and I also have 2 Lync 2010 Client.

  First of all, Lync Client A calls B Lync Client and call in place.

  Seconds, participant to invite Lync Client B (call 861002 for a sip phone that connects to the DUT)

  The conference call itself has no problem, everything is fine except that:

  The mediation server PROMPT message to the DUT has NO Conference URI or the isfocus parameter in the Contact header field.

  There will be some configuration that I missed. Please help me solve this problem.

  Thanks in advance.

  Johnny

  Hello

  Post your question in the Forums of Lync server: http://social.technet.microsoft.com/forums/en-us/category/lync/

  Thank you.

• I finished the installation of Sharepoint 2010 and he is told to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?

  I finished the installation of Sharepoint 2010 and went through the Setup Wizard. It is said to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepoint2010general/threads

• I had Windows server 2008 with microsoft web apps 2010 and I am unable to install KB2553095 to (MS11-072)

  I had Windows server 2008 with microsoft web apps 2010 and I am unable to install KB2553095. While trying to manually download and install its giving message "there are no products made by this package installed on your system", but I had windows web apps 2010 SP1 is installed on all my servers.

  Security bulletins:

  MS11-072

  Security bulletins:

  MS11-072

  Security Bulletin: MS11-072

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Multiple server Instances VI

  Hi all, I have to create multiple instances of a VI using VI server method. I put the 'incoming' of the VI client properties. If I call the VI client under the name sub - VI I can create N instances without any problem. But if I use the VI server method when it executes the method 'run', it gives me the following error:

  1000 error node invoke in Server.vi
  Possible reasons:
  LabVIEW: The VI isn't in a State compatible with this operation.
  Name of the method: Run VI

  I know that I can't open multiple instance of the front panel of this way, but I should be able to run it. Look at the example attached.

  Thank you...

  You must pass the '8' for your open VI reference option. It called the VI reentrantly, so that the error will not occur.

  However, how to call this way screw stops execution of the subVIs if the server ends. If you have to keep the 'alive' server or you must use VI models (* .lives) instead of screws

  Another note: If you have the Subvi the value modal dialog box, you will lock the other windows of your application LV is accessible!

  hope this helps,

  Norbert