multiple vcenters - sso single or multiple sso

Similar Questions

• vRA: identity device or vSphere SSO when there are multiple vCenters (each with their own SSO) in the environment?

  The installer: We have multiple vCenters each with their own SSO. We must build a minimum install vRA lab 6.1 and used the SSO to the vCenter which is the endpoint lab (and ended up having problems when this vCenter SSO had to be rebuilt and in turn liquid reconstruction vRA). Building on a vRA 6.2 Distributed Lab (based on deployment in the 6.1 reference architecture) to validate our production plan and decided to use the identity.

  Question: For a production buildout there is no reason not to use the device of the identity (scalability, performance, lack of HA)? If you are using vSphere SSO, when there are multiple vCenters one that should be used for SSO of vRA? If that vSphere SSO is never removed (say on the whole things are replaced by a central SSO for all vCenters rather than each on their own, or some issue needs to be rebuilt) is there a clean way to repoint SSO vRA without a reconstruction?

  Post edited by: RebeccaW (removed unrelated to Postgres question)

  What I did in this case is to build a fresh cluster SSO using vCenter SSO and pointing vCAC on this one. It becomes my main source of SSO and I slowly vCenters point and other components to it overtime. You usually put vCAC SSO signed certificates and generally I find people vCenter SSO deployment in this way. To remedy this trying to modify an existing SSO vCenters and risk having to reinstall your VC because you missed the CERT, simply create a new. This also alleviates a changing overtime vCenter and spoil the vCAC SSO. The unit of identity cannot be clustered or joining existing areas of SSO. So if you are looking for HA and scale which probably does not cut it.

• Strategy for the SSO with multiple vCenter servers.

  We are upgrading vSphere/SRM 5.0U1 for vSphere/SRM 5.5U1 with multiple vCenters in our environment. After reading 2058239 KB:

  VMware KB: installing vCenter Single Sign-On 5.5 on a Microsoft Windows platform

  We install SSO on a separate Windows Server and choose vCenter Single Sign-On for your first server vCenter Server for this first instance. Now my question is for the following facilities as the vCenter for MRS or vCenters which manages areas replacement fault which option, existing site or new, do we choose? Thank you

  
  

  You have therefore three sites.

  The first time, you will choose vCenter Single Sign-On for your first server vCenter Server.

  For the second one on the same site, you choose existing vCenter Single Sign-On for an additional vCenter Server in a site.

  Now, when you come to an another site vCenter and third, you will need to decide if you have a site that is your main or you want to still have a site on the second.

  If you decide to join at the elementary level, that you will yet choose existing vCenter Single Sign-On for an additional vCenter Server in a site.

  If you choose to have another site, you choose vCentre of Single Sign-On for an additional vCenter Server with a new site.

  The end of it, you will have to make the decision to design. I can only tell you what they mean. Make sure you have adequate connectivity between sites.

• Configure multiple HTTP servers with APEX SSO

  Hello
  We currently have APEX configured to work with SINGLE sign-on using the URL http://server.com:7777/pls/apps. Some companies prevent users to go to the URL with the port 7777. We set up a new server http https rather than just current http implementation. All applications that use the SSO do not work with the new URL. I've added the new partner application in the SSO admin and tried running @regapp.sql. APEX may be configured to run multiple servers http with APEX engine registered as a partner app? We are finally going to a single server but need both up during the transition period. Thanks for any help.
  
  Brian

  Brian,

  Yes. As long as the value of lsnr_token inserted by regapp is unique. It looks like HTML_DB:hostname:port.

  Scott

• VCenter Mgmt and calculation with single SSO and related modes?

  I am a great vCAC environment design and want to separate not only Mgmt/Compute clusters, but also of the vCenters.   I want to be able to manage these inLinkedMode vCenter.  My plan is to have 2 vCenter VM and VM Web/asingleSSO.    When you install the two vCenters, I've just direct them to the server shared Web SSO, and then enableLinkedMode?

  Will this work?  Something else I'm missing?  AsingleWeb server instance will be able to manage multiple vCenters?

  Thank you

  -MattG

  Hello, MattG.

  Yes, you can use 1 SS and 1 service WebClient for "single-pane-of-view" for 2 vCenters, I did the same thing recently, and you need not related modes. Just point your SSO and Web when installing two vCenters. But in this case, you can manage both of them single point in the Web Client, no thick vSphere client. If you need to manage two of them only heavy customer too, then you should make the related modes, but in this case as far as I know, you must also install multi-site SSO, not simple SSO node. I use the first schema.

  Sorry for my bad English.

• Multiple VCenters in one VSphere Client

  Kinda new to this but just curious, can you have multiple VCenters in a single client VSphere? Currently I have 6 VCenters I log in, I have therefore 6 vsphere client running.

  Welcome to the community.

  You can configure in bound mode. According the current scenario of you, you have already configured the vcente. If you need to add them in to a single pane view vcenter.

  Here's a nice blog that help you solve your problem.

  hope you find interesting.

  http://www.VKernel.ro/blog/configuring-VMware-vCenter-Server-linked-mode

  Thank you

• Running on multiple vCenters vCheck

  Can I simply by running the vCheck report only once on a single window PowerCLI run it against multiple vCenters at the same time?  Or do I need to have a separate PowerCLI session for each vCenter that I run against?

  The current version of vCheck seems to provide 1 single host (vCenter) to connect to (the variable $Server in GlobalVariables.ps1).

  So for now, you need to run the script multiple times I'm afraid.

• Inventory report - multiple vCenters

  Hello group,

  I am trying to run a report of inventory using the script below. When it is executed on a vCenter only the output is great, but when I try to run the same report on multiple vCenters then the output has the values of the first vCenter in the script for others as well... So in this case the script runs first on vcenter01 and prints the output and then runs on vcenter02 but prints only the same values of vcenter01... Pls help...

  $vcenters = "vcenter01", "vcenter02".
  $portvc = "443".

  SE connect-VIServer $vcenters - port $portvc

  $vcreport = @)
  {Foreach ($vcserver to $vcenters)
  $intyhosts = get-VMHost | Name sort
  $intyvms = get - VM | Where {($_.)} PowerState - eq "Receptor")} | Name sort
  $intyds = get-Datastore. where {$_.} Type - eq "VMFS" - and $_. Extensiondata.Summary.MultipleHostAccess}
  $nohosts = $intyhosts. County
  $novms = $intyvms. County
  
  $vcrow = "" | Select 'vCenter Name', 'Center', 'Clusters', 'ESXi Hosts","VMs","VMFS data warehouses.
  $vcrow. "' vCenter name" = $vcserver
  $vcrow. "' Data centers ' = (get-data center |) SELECT name. mesure-objet) .count
  $vcrow. "' Clusters ' = (Get-Cluster |) SELECT name. mesure-objet) .count
  $vcrow. "' ESXi Hosts ' = ($intyhosts). County
  $vcrow. "' Virtual Machines ' = ($intyvms). County
  $vcrow. "" VMFS data warehouses "= .count ($intyds)
  $vcreport += $vcrow
  }

  Kind regards

  VMSavvy

  Hello, VMSavvy-

  The results you see are due to the 'DefaultVIServerMode' of your PowerCLI instance configuration.  When it is "multiple" and make you a Get - VM, it gets for example, VMS in all connected vCenters.

  So you can change your code a couple of different ways in order to get info from both single vCenter.

  One way would be to change the location to connect to vCenter servers give - navigate the script block Foreach Connect-VIServer and have simply plug the $vcserver current in this iteration of the Foreach loop.  Then, at the end of the script Foreach block, add a logout-VIServer-confirm: $false to disconnect.  The next iteration through will connect to the following server vCenter.

  Another way would be to add the server to the GET setting-* cmdlets.  Thus, for example, the line that gets the VMHosts would change something like:

  ...$intyhosts = Get-VMHost -Server $vcserver | Sort Name...
  

  That tells the cmdlet to contact the vSphere server specified in the request.  Preventing counties apparently duplicate that have seen you.

  How does do for you?

• VCOPS through multiple vCenters not in bound mode

  Hello

  Y at - it no limitation of licensing for me deployment VCOPS enterprise edition on multiple instances of vCenter server, where the vCenter servers are not in bound mode? All vCenter servers are part of the same company, but I saw that the VCOPS will be separate proceedings related to the separate vCenter servers am breaking licensing rules by installing all these instances with the same license key?

  Gregg

  Do not use the standalone vCenter based Licensing.  Therefore, you can upgrade the license in this version of the product and then monitor any number of the vCenters.

  The VAPP version gets and use reports to a single vCenter, which becomes the source of the license.  You can put a single license in the vCenter and then follow multiple vCenters with a single instance of vApp... up to the limit.

  If you want to have a paralytic by vCenter, then (as shown above), you will need to divide portal site licenses VMware.com have enough per VAPP installed on each vCenter licenses.

• Manually to scan multiple Pages into a single PDF file.

  Gentlemen:

  My gear - 4620 HP all-in-One.

  Problem:

  I prefer to scan multiple pages into a single PDF file and save them on the hard drive manually.

  The ADF is twisting the pages that are saved in the PDF file.

  Please notify.  An upgrade of the software will be available for manual use set up of the

  pages on the glass?

  No other problems with the HP 4620.  I use Windows 7, 64 bit.

  Just reply to your convenience.

  PDF4ME

  PDF4ME,

  Watch it again once and document Scanning how-to - for Windows 7, I don't see that Preview Scan must be turned on to scan several pages.

  You can check again to see if you can get this works by following the instructions in the document.

  HP Officejet 4620 e-all-in-one printer support - scanning - Windows 7

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Printing of multiple numbers of document/picture on a single page

  I have a separate document for each week of the year, each document has a worksheet in it. I would like to print the worksheets in each document, but want to put more than one of them on a page. Is this possible? So far, I can only print each individual worksheet... Thanks for the tips!

  Hi pmgw,

  I don't know any way to print a table of two separate documents on a single page in a single step. There are several ways to do this using multiple steps.

  1. You can configure individual documents so that the tables you want to place on the printed page even alternate position on their leaves, 1 week at the top, 2 bottom, week 3 on top, etc.
     Two consecutive weeks can then be printed on a single page by printing the first, reinserting the page into the printer using the same orientation *, then print the second.
  2. Open the documents numbers during the two weeks that you want to print.
     In the second, select the table to print. Copy.
     Switch to the first. Click on an empty space on the map. Dough.
     Drag the table glued in position. Print.
     (optional) Select the pasted table and press DELETE.
  3. Open a document of 'Blank canvas' pages.
     Open documents from figures for the two weeks that you want to print.
     Copy and paste the table of each document numbers in the Pages of the document.
     Print.

  Notes:

  Second printing works - Orientation: the best way to ensure that the document is oriented the same for the two rounds is to place a light pencil mark near the center of the edge of the paper closest to you when it is in the tray. After the first run, replace the paper in the tray with the pencil mark in the same position. U

  Table selection: to select an entire table, you can place the mouse pointer on an outer border of the table. When the pointer icon changes to a line crossed by a two-headed arrow, click to select the entire table. Or click the table icon in the sidebar (Numbers ' 09). None of these methods to select a table to move or copy.

  Or (once) click any cell in the table, and then press command + A to select all. Use this method to copy the contents of the table. When glued, the result is the same as copy and paste by using the first two methods.

  The use of the Pages: the advantage of paste tables into Pages is an easier control of the appearance of the printed page. If you do this often, I would say adding guides to layout of the document Pages indicating where to place both calendars, and then deleting the calendars (leaving the guides) and save the document as a template.

  Kind regards

  Barry

• HP Deskjet 2540: Cannot scan multiple pages into a single PDF for printer Deskjet 2540 Windows 10

  I'm scanning several pages (5) in a single document.  I followed the instructions in the other answers to the questions - I chose the type of pdf file, I chose a less than 300 DPI resolution (I use the default value of 200 dpi), and I clicked on Preview (and not scan).  However, there was no option 'Add' page when you preview is posted.

  

  I don't know that I've scanned multiple pages in a single document, following the intructions of same, before moving on to Windows 10.  It is no longer possible with Windows 10?

  Thank you.

  Is this program, the program of HP that was loaded with the drivers and full software?

  You should have something like this with a sign at the 07:00 position.

  

• How to scan a document multiple pages in a single PDF, photosmart 5510e?

  I need to know how to create a multiple-page document in a single pdf I tried advaced settings and unchecked creat new file for each page and it does not work...

  Found the solution elsewhere on the forum, you need the resolution to 300 dpi or lower for the button Add/Remove is displayed. Go figure...

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/the-button-to-add-remove-pages-when-creating-multiple-page-PDFs/m-p/1869117/highlight/true#M43767

• Reading time to fetch multiple records vs. single record

  Hi all

  I have an application where I need to get several records, I use an SMU-5185, and basically, the problem is that it takes too long to retrieve multiple records, I did a test to measure the time it takes for the reading of the hole 32 MB of data and results.

  Parameters:

  Records to Fetch = 8192 (maximum 1 page = 4 KB, 8192 Records = 32 MB)

  Fetch time = 1100 ms

  Records to Fetch = 1

  Samples to Fetch = (2 ^ 25-1500) = 32MB

  Fetch time = 70 ms

  So, I want to know why it takes more time to get the multiplerecords if both are reading the same amount of data? Is there something I can do to decrease the recovery time?

  Thank you

  Hi Rodrigo,

  In fact, I think that the rate of release should be out of the equation, as in the while loop I wait until the end of the acquisition,

  You're absolutely right, I apologize for this oversight.

  I'm you test your code and see several times (about 930ms) Fetch when only pick a channel.  As soon as I specified two channels, the recovery time is an order of magnitude smaller (around 90ms).  Change the sampling frequency, fetch timeout and record length do not seem to affect this disparity in the order of magnitude.

  So to reiterate:

  In the case of single record , changing from one channel to both channels double recovery time.  It's what I expect.

  In the case of multi recording , changing from one channel to both channels decreases the time of recovery by an order of magnitude.  I don't think that.

  Furthermore, when I test in the example shipping niScope EX Acquisition configured standard I do not see this effect.

  (1) can you confirm that, in the case of multi account for your tests, you see that the recovery time reduced when you specify two channels instead of one?

  (2) can you confirm that you are not able to replicate that in the example Acquisition set up ?

  I have tabled a CAR 350194 to address this behavior more with R & D, but unfortunately I can't promise a timeline for the resolution.  I recommend at this stage unless you change Acquisition is configured when you set up your code instead of starting from scratch.  Support at home OR you can call at any time to check the condition of this CAR.

  To answer your question of why a use case takes more time than another, it will take more time to study according to the guidelines of this CAR.  We have already mentioned there is some overhead involved with multi-record fetch, but whether or not the time more or less long you see are good times is something that R & D will have to answer.

  Please let me know if you can confirm what I see by testing.

  -Andrew

• HP5610xi: Using a HP 5610xi, how can I scan multiple pages into a single file?

  Using a HP 5610xi, how can I scan multiple pages into a single file?

  Hello
  
  Thank you for using the HP Forums.

  Can try this software:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  This relevant resource will show you how to scan multiple pages into a single file:

  HP Officejet Pro 6960 series: scan a document of 6 pages 2 sides using the ADF

  Let us know if it works!