Multisim - location database components list
Is there a way to include in the Schema pane lists the exact location (or at least, including databases) components come? The column of the family does not help if the same family exist in users and internal databases. My company has a policy to use only components of the database in a new design. I want to check some drawings completed and make sure that it is not all the components of a user database. The only way I can do now is to check the properties of each component, because the exact location is listed in the values tab.
Any help would be GREATLY appreciated. I have a few hundred components on the schematic, and it'll take a lot of time if I have to check them one at a time. Thank you.
Michael
Hello m22oswald,
In addition, you can go to tools > update components. This should get you a list of components with properties, which of them is the database.
I don't see a way to export the information, but at least you'll be able to see the list.
Kind regards
Luis C.
Tags: NI Software
Similar Questions
-
How to keep the /var/db/locate.database locate to removable disk
I just ran sudo /usr/libexec/locate.updatedb with two mounted external drives. I think that when the command is then executed by the weekly update of system, and readers are not mounted, then the data of these drives will be deleted. I guess I could copy /var/db/locate.database to a file for backup and then use the-d option to locate to search for a file. But is there a better way to handle this?
Maybe I should be using mdfind and mdutil to handle this, but I did not understand on external drives for either.
Thanks for help.
Boyd
But is there a better way to handle this?
Yes. Use a disk cataloging application. I'm sure you can find several in a web search. I don't have a specific recommendation.
-
cannot locate block sender list in outlook express
I write a question on behalf of the client. Here's the problem of the customer:
I'm not able to locate my block sender list in my OUTLOOK EXPRESS email. Some of my emails do not come to me and wanted to check my block senders list, but it is empty.
Note that if an address is in the blocked senders list, the message will still arrive in deleted items.In OE: Tools | Message rules | List of blocked senders.If messages do not come at all, check the Message rules, especially for a rule that has remove it from the server as the action.Please also indicate the client to send a message to one of these problematic addresses and ask them to respond with the answer option. If this message is received, the sender has the wrong address for your customer in the address book. -
Find the technology under ORACLE_HOME database components
How to find out what are the components of technology installed under ORACLE_HOME database?
DB 11.2.0.2Hello
DBA_REGISTRY query to get the names of components-
Select identifiant_composant, ComputerName, version of DBA_REGISTRY;
HTH...
Sumit. -
linking the database field list box
Hi guys, this is really frustrating me that I have done this before but forget how to do it now. I created a list box in which I want to connect to all the data in a certain area in my database so that when the user extends the list box they will have a direct list of values of the database in which to choose. This ensures that the list will be updated dynamically along with the database and also limit the user to these only values input in the database, thus reducing errors in user input.
If someone would be kind enough to remind me how to do this, I would be very gratefull.
Thanks in advance.First of all, you need to eliminate the "Elements of the list '' for the list in the property palette item.
Then, create the following procedure:
PROCEDURE p_populate_listitem IS
list_id POINT;
Nom_liste VARCHAR2 (40): = ' DATACODE. ListItemname';
rg_name VARCHAR2 (40): = "LIST_RG";
RG_ID RecordGroup;
ERRCODE NUMBER;
result NUMBER;
Str varchar2 (1000);
BEGIN
-fill values
list_id: = Find_Item (list_name);
RG_ID: = Find_Group (rg_name);Str: = ' your request, Select here.
Errcode: = Populate_Group_with_query (rg_id, str);
IF errcode = 0 THEN
result: = GET_GROUP_ROW_COUNT (rg_id);
END IF;
Clear_List (list_id);
Populate_List (list_id, RG_ID);END;
And then under the trigger a TIME NEW FORM INSTANCE of your form, call the procedure...
It should work...
Kind regards
gunajee! -
Locations database for 12.1.0.2 models?
Where can we get the model of database to configure the repository for 12.1.0.2?
Please give the link to download these.
Thank you
WernGo to the download page of EM
http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/downloads/index.html
and search "database model (with EM 12.1.0.2 preconfigured repository) to install Enterprise Manager Cloud control 12 c Release 2 (12.1.0.2)" link
Here's the direct URL:
http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/Downloads/DB-templates-1841012.html
-
Number shaped Non-Database components
If an element represents a column of data, the format on the 'Settings' tab mask works. But if the item is not a database column, the format mask will not apply.
How can I format numbers in the page elements that do not represent database columns?I am not the expert in javascript, but here's an example that I used to load the text in a line in the form of a number and perform a calculation and load the result to another column. It does include formatting in JS, but maybe it'll be useful.
var nXtbuy = parseFloat($(this).closest('tr').find('.base_next_buy_hid').text()); var cRslt = (nXtbuy + (nXtbuy * parseFloat($v('P85_PERCENT'))/100)); cRslt = Math.round(cRslt*Math.pow(10,parseFloat($v('P85_ROUND'))))/Math.pow(10,parseFloat($v('P85_ROUND'))); $s('f02_'+vRow, cRslt) The parseFloat is the significant piece there to avoid NaN
Then, if you google "formatting in JavaScript", a number of good entries search there are several.
Published by: Bob37 on May 11, 2012 12:15
-
I want to link to the Web pages of a component from the list. Can someone help here? Can I place an order in the parameter Data?
Yes, labels, and then enter the data for these labels as, http://www.something.com...
then fix it to the framework... list_box to change the name of the instance, you gave your component -
Location of components shared->; static files
We have a strange question by which we are unable to update a file in the shared components-> static files section. We delete the file, but it is still available via:
wwv_flow_file_mgr.get_file? p_security_group_id = 941120303598270 & p_fname = script.js & p_inline = No.
I can't find the table that stored them in. Anyone who knows a problem like this with a certain file? It is not a problem in general. I can add and change all the other files. The file only problem is that I want to change (Murphy?).
Any help would be greatly appreciated!Hello:
Run the query below from sqlWorkshop
select * from apex_application_files where filename='script.js';
The file is stored in the table named "wwv_flow_file_objects$" in the scheme of 'FLOWS_FILES '.
CITY
-
Using the old Master of MultiSim databases in New Versions
Hi all
I have the following question. Is it possible to use old Master databases in new versions of Multisim?. For example, I try to use the Multisim 10 of Multisim 11 database but it does not work. There are some parts that are in the 10 version of the database that are not in version 11 of the database.
I use Multisim 11. I have the file Multisim 10 database of origin of my old installation. Thank you.
Hello
It is not possible to use the database to a version of the software in another. The master database has components based on the version you purchase. It is possible for you to place the components (to the exclusion of the lively and nonparametric) on your design in version 10 and open the drawing in version 11 or 12 and save them to your user database. To save, right click on the component, and then select Save the database component.
I hope this helps.
-
How to fill the drop-down list components installed?
I have installed Eclipse and the blackberry for eclipse plugin that includes the component pack 4.5.0. I have installed all of the components listed on this page: http://na.blackberry.com/eng/developers/javaappdev/javaeclipseplug.jsp. The versions 4.2.1 and 4.3.0 are zip files that I add to Eclipse by using the software update-> add the site-> archive. Version 4.6.0 and 4.6.1 4.7.0 are exe files that settle in the location C:\Program Research In Motion\BlackBerry JDE component Package 4.x.x.
In the folder plugins on the box, I see version 4.3.0 and listed 4.5.0 4.2.1. When I go on Blackberry JDE-> installed components and click the drop-down list box, the only pack component that I see is 4.5.0. How do the other components packs appear?
Well it's resolved, I guess. After about 3 hours, the software updates-> add the site-> repository for the Blackberry update works. When I installed the components as a result, they appear in the drop-down list. It's a little confusing, because I already tried this at least 5 times and each time before eclipse was a java error when doing this.
-
list of archive logs show only 1 location instead of 2
Friends...
OS: OEL 5.5 64-bit
DB: 11g R2 (11.2.0.3) 64-bit
I put 2 destination to archive. Log_archive_dest_1 = / u01/archive1 and log_archive_dest_2 under/u01/archive2.
When I do this...
at the same time, when I do this...SQL> archive log list Database log mode Archive Mode Automatic archival Enabled Archive destination /u01/archive2/ Oldest online log sequence 8 Next log sequence to archive 10 Current log sequence 10
Why list archives logs showing that one location whereas the query indicates both the location. and why list of newspapers of record showing instead of archive1 archive2?SQL> select dest_name,status,destination from v$archive_dest; DEST_NAME STATUS DESTINATION -------------------------------------------------- -------------------------------------------------- -------------------------------------------------- LOG_ARCHIVE_DEST_1 VALID /u01/archive1/ LOG_ARCHIVE_DEST_2 VALID /u01/archive2/
Thank youThe LIST of NEWSPAPERS of ARCHIVES control gives a quick overview of the State of archive, it clearly should not be used to report on destinations.
The ARCHIVE_DEST view $ V gives a clear view into where on the disk are these destinations and when you use the LOG_ARCHIVE_DEST_n parameter, is closely related to what has been entered in the file init.ora parameters
Maybe this might help you http://www.databasejournal.com/features/oracle/article.php/3867646/Oracle-Database-Archive-Logging---Where-are-my-archive-logs.htm
-
List item for the item database
Hi all
I use a list item to fill a column of data, but I am not able to do. If I change to a database element not it works perfectly. Can anyone tell me is there a problem with the column of point and the database of list I use.
My code is,
DECLARE
RG_NAME2 VARCHAR2 (15): = "RG_OP";
RG_ID2 RECORDGROUP;
ERRCODE NUMBER;
BEGIN
RG_ID2: = FIND_GROUP (RG_NAME2);
IF ID_NULL (RG_ID2) THEN
RG_ID2: = CREATE_GROUP_FROM_QUERY (RG_NAME2, "select fso_manager_name, to_char (fso_code) of fs_system_operators");
END IF;
ERRCODE: = POPULATE_GROUP (RG_ID2);
CLEAR_LIST ('INVOICE_HEAD.invh_fso_code');
POPULATE_LIST ('INVOICE_HEAD.invh_fso_code', RG_ID2);
END;
INVOICE_HEAD.invh_fso_code is a database column.
version of forms: form of oracle 10g
Can someone help me.
Thank you and best regards,
JaKes
Use this procedure to fill out your list item.
PROCEDURE LOAD_LIST_ITEMS (NOM_LISTE VARCHAR2, VARCHAR SQLSTR) IS
GROUP_ID RECORDGROUP;
ITEM_ID;
SQL_NEW VARCHAR2 (2000);
REPORT NUMBER;
BEGIN
ITEM_ID: = FIND_ITEM (LIST_NAME);
IF ID_NULL (ITEM_ID) then
MESSAGE ("list item ' |") Nom_liste | 'does not exist.");
END IF;
CLEAR_LIST (ITEM_ID);
SQL_NEW: = SQLSTR;
GROUP_ID: = CREATE_GROUP_FROM_QUERY ('GROUPNAME', SQL_NEW);
STATUS: = POPULATE_GROUP ('GROUPNAME');
IF STATUS = 0 THEN
POPULATE_LIST (ITEM_ID, GROUP_ID);
END IF;
DELETE_GROUP (GROUP_ID);
END;
Call it like this in your time-new-form-proceedings
LOAD_LIST_ITEMS('YOUR_BLOCK.) LIST_ITEM ',' SELECT ENAME, TO_CHAR (EMPNO) OF SCOTT. EMP ORDER BY ENAME');
-
Hello Flexers,
because I find it a bit difficult to describe the problem I will try that after posting the code and a screenshot:
<s:Application
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
width="100%" height="100%">
<s:layout><s:HorizontalLayout/></s:layout>
<fx:Script>
<![CDATA[
import mx.core.IUIComponent;
import mx.core.IVisualElement;
import mx.events.DragEvent;
import mx.managers.DragManager;
protected function draggableLabel_mouseDownHandler(event:MouseEvent):void {
DragManager.doDrag(event.currentTarget as IUIComponent,null,event);
}
protected function leftGroup_dragEnterHandler(event:DragEvent):void {
DragManager.acceptDragDrop(event.currentTarget as IUIComponent);
}
protected function leftGroup_dragDropHandler(event:DragEvent):void {
leftGroup.addElement(event.dragInitiator as IVisualElement);
}
]]>
</fx:Script>
<s:List id="leftList"
dragEnabled="true"
dropEnabled="true"
width="200" height="200">
<s:ArrayCollection>
<fx:String>Item 1</fx:String>
<fx:String>Item 2</fx:String>
<fx:String>Item 3</fx:String>
</s:ArrayCollection>
</s:List>
<s:List id="rightList"
dragEnabled="true"
dropEnabled="true"
width="200" height="200">
<s:ArrayCollection>
<fx:String>Item 4</fx:String>
<fx:String>Item 5</fx:String>
<fx:String>Item 6</fx:String>
</s:ArrayCollection>
</s:List>
<s:Group id="leftGroup"
dragEnter="leftGroup_dragEnterHandler(event)"
dragDrop="leftGroup_dragDropHandler(event)"
width="200" height="200">
<s:Rect left="0" right="0" bottom="0" top="0">
<s:fill><s:SolidColor color="0x00FF00"/></s:fill>
</s:Rect>
</s:Group>
<s:Group id="rightGroup"
width="200" height="200">
<s:Rect left="0" right="0" bottom="0" top="0">
<s:fill><s:SolidColor color="0xFF0000"/></s:fill>
</s:Rect>
<s:Label text="DRAG ME"
color="0x000000"
mouseDown="draggableLabel_mouseDownHandler(event)"
y="0"/>
<s:Label text="DRAG ME"
color="0x000000"
mouseDown="draggableLabel_mouseDownHandler(event)"
y="40"/>
<s:Label text="DRAG ME"
color="0x000000"
mouseDown="draggableLabel_mouseDownHandler(event)"
y="80"/>
</s:Group>
</s:Application>I came across a problem recently. I wanted to be able to use drag - and list controls dropEnabled property and (on the same canvas) use the functionality of drag-and-drop automatic implemented other components (in this case, a combination of movable labels that can drag a group component). I wanted the labels to be moved in the entire screen, but only fall on the part of the Group (NOT the list). The items in the components list were supposed to be interchangeable between the lists in the set of properties dragEnabled and dropEnabled to true. The problem is that when I drag the labels of the groups on the lists a null #1009 object reference error is thrown because the list does not try to calculate the index fall for labels. I know that I could work around the problem by setting dropEnabled = false on the lists and implement drag - move by hand, but I hope that both variants of drag-and-drop coexist in a spirit of flexibility.
Any thoughts? Thank you very much!
Kind regards
Thilo
When you delete something on a spark list you will need to provide a dragSource not null in the format 'itemsByIndex', if you change your code to something like this, it should work:
protected function draggableLabel_mouseDownHandler(event:MouseEvent):void {}
do some data to pass to the list
var someData:Vector. -
Coaxial connector in Multisim component
Hello
Im looking for a component of coaxial connector in the Multisim database as well as the site of components listed here. But I couldn't find one. Can someone get me a clue on how to find it. Thank you.
hers,
There are several symbols of 2-pin connector that you could use and attach them to the available Ultiboard fingerprints or footprints BNC customized based on what it takes, however, here is a diagram with a BNC connector for example with a standard configuration of symbol of the BNC.
Do not hesitate to register for databases, and customize with no specific information (that was created for a 50 ohm coax).
Kind regards
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 street market 1A
S. Portland, ME 04106
E-mail: [email protected]
Phone: (207) 892-9130
Telec. (207) 892-9508
Maybe you are looking for
-
Nothing to add.Three days that I want to connect on https://accounts.firefox.com/signin?service=sync & context = fx_desktop_v1 & entrypoint = menubar
-
HP Photosmart Premium c309a doesn't fully work with Snow leopard 10.6.1
I don't see any answers in the Forum on my printer model, so here goes- The printer is configured for a wireless connection. Cannot get IPhoto to print on a photo plate, no matter how I play with the settings in the Menu print. However, using the ke
-
Snmp OID 4 R510 don ' t answer
Hello I have a problem for a few weeks. I had 4 R510. Before, I configure snmp on them to send information to a software for snmp monitoring information. So now, don't answer 4 OID on a single server. 2 x power supply status of power and the Gene
-
I have a printer that is connected to a Win7 machine and shared with other twelve Win7 machines. One of these twelve machines is password protected. When I want to access my printer of this password protected machine is showing offline... But when I
-
How can I back up the files that that are on a mapped network drive?
How can I back up the files that that are on a mapped network drive? I can see the disks and the files that I want to backup in windows Explorer, but when I use the tool integrated with seven windows backup it does not list the mapped network drives