Similar Questions

• The file I tunes is on a locked disk or you do not write to this folder permissions

  install iTunes on pc tha

  The file I tunes is on a locked disk or you do not write to this folder permissions

• Problems with folder permissions after replacing the hard drive

  Hello

  Recently, I replaced the hard drive on my mac.  Already before the replacement, I got the files that I had locked.  Now I'm unable to open the file.  I get the error "the folder 'nom_de_dossier' can not be opened because you don't have permission to see its content".  I looked at the permissions for the folder and everything he says is fetch.  I ran a command in the Terminal and for one of the records in question, that's what I see-

  drwxr-x - 13 501 501 442 5 July 2013 MG

  Any help would be greatly appreciated!

  Running OS X El Capitan

  10.11.4 version

  Try this first:

  Start the mac all holding the SHIFT key, it is slow, connection, and then select Restart from the Apple menu.

  When this does not help:

  Reset password utility in the recovery Partition:

  1. Restart your computer from the recovery partition.
  2. Open disk utility and run a repair permissions on your boot volume (in ElCapitan click the first aid tab). Once this completed, close disk utility. We do this for good measure.
  3. Open a Terminal from the Utilities menu. Type in resetpassword and select your user (NOT administrator system/root) account in the menu drop-down.
  4. Click on the Reset button at the bottom of the window ACL section and Reset the folder permissions.
  5. Exit the utility password and return to the main recovery menu.
  6. On your keyboard, press ⌘ + Q and restart your computer. It is very important that you don't hold down the power button to exit the recovery session, or the ACL Reset to occur.

• Win 7 folder permissions

  I searched but could not find an answer, so any help is appreciated.

  I was running Win7 Pro x 86 on a laptop. I bought a new laptop with Win7 Pro x 64 installed. I created a user, the configuration, as well as on my laptop prior.
  After installing all updates from MS, I installed a software I was running on my other pc. With Win7 x 64, even if the folder permissions seem identical to the other my laptop, I can't write to a folder. I get the "you must provide administrator permissions to copy to this folder. I'm sure that I can fix it, but before I do, I want to understand what is happening.
  My account is a member of the Administrators group. The record is held by the SYSTEM, as well as on the other machine. SYSTEM and administrators have full control. So, why my account administrator controls total? Thank you and Merry Christmas.

  Windows 7 has intentionally protects the program files and Program Files (x 86) folders.   It is a function of UAC.   Be an administrator does not override this protection.  It is accessible by turning off UAC (not advisable to leave power off).

  In earlier versions of Windows, it was common for programs to save data in the program folder.  It was a bad practice for several reasons.   In Windows 7 the ProgramData folder is intended to be used for this purpose.  It is clear that the program that you are talking about is not designed for compatibility with Windows 7.   7have Windows Vista and Windows 7, a built-in mechanism that sometimes allows such software work.  It can move the data file to a location that is virtualized and treat it as if it was located in the program folder.  It is operated during the installation of the program (and would not come into play by the copy of a program).
  See http://support.microsoft.com/kb/927387?wa=wsignin1.0
  For more information if you are interested.

  I advise you to not take into account the dangerous opinion of akil P change of property rights and access to the Program Files (x 86) folder.  This would undermine the security and might cause problems in the long term.  At most you could temporarily turn off UAC, do your copy and then turn it back on, but it is doubtful that the software will work correctly.

• I had hearing for 2 years.  Today, it crashed.  He made a mistake of configuration: 16 the message said to uninstall and reinstall.  Yes, I did.  Still the same error.  Then, I searched the forum and checked the two folder permissions.  They were right. 

  I had hearing for 2 years.  Today, it crashed.  He made a mistake of configuration: 16 the message said to uninstall and reinstall.  Yes, I did.  Still the same error.  Then, I searched the forum and checked the two folder permissions.  They were right.  Then what should I do?

  Hi Charles,

  Please see the following help on the problem article.

  https://helpx.Adobe.com/x-productkb/policy-pricing/configuration-error-CS5.html

  I hope this helps.

  Kind regards

  Sumit Singh

• Adobe PCD folder permissions change after the launch of CS5 programs

  There is a seemingly important issue for Creative Suite

  5 licenses: C:\program files (x 86) \common files\adobe\adobe pcd

  Unfortunately the default permissions after installation (standard installation or install Adobe enterprise deployment tools) are:

  Everyone: read

  Administrators: Full control

  This is a problem for the use of the software, if your users are not local administrators.

  If you change the permissions of the folder to grant access to other users, launch InDesign or Photoshop, Adobe PCD permissions back to their original settings.  I checked my permissions to save well by closing and reopening the folder permissions.  It is only after a CS5 program was launched to return permissions.

  How can I get residence permits?  So far, I make people admins local, which is not good, if they find out.  They will install all kinds of crapware and legitimate crappy software and break their computers more far.

  Thank you

  Josh G

  Portland, OR

  Found a solution to get Acrobat 9 Professional to work without giving users admin rights.

  1.), connect as admininstrator and give the control total of users on the following folders and all content (replace permissions on all child objects):

  • File Adobe in Program files.
  • Adobe common files folder.
  • Files common Macrovision.

  Run 2) program as admin first to get rid of some of the regisration and user login guests to try.  It should work now.

• Download folder permissions seeds after Time Machine

  I recently restored my downloads folder full of time Machine to the top by car. I HAVE NOT USE TIME MACHINE for THIS... just slip and fall.

  A LOT of the files/folders have a permissions or problem of blocking or something.

  When I try to delete them, I get the "Finder wants to make changes. Type your password to allow this. "message.

  HOW CAN I FIX IT?

  Permissions for individual files look right. Locked is not checked.

  

  Downloads folder looks like this, but I don't know if this is right.

  

  I used Onyx to "repair permissions" on the drive, but that has not changed anything.

  Can anyone help?

  This procedure is a diagnostic test. It makes no changes to your data.

  I tested these instructions only with the Safari browser. This is what I suggest you use, even if your favorite browser is something else.

  Please triple - click anywhere in the line below on this page to select:

  /bin/ls -@Oden ~/Dow* | /usr/bin/pbcopy

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

  The Terminal window does not display the output. Please do not copy from there.

• Page HOME of FOLDER permissions "apply to the included items.

  Hello.

  It is more a question of information - I was having a weird thing happen on my Mac - and I called Apple. My photo library save size was different from that on my hard drive. After another manual run of TM, it changed.

  Without hesitation, the first thing that Apple had owed me 'Get Info' on my home folder and change the permissions to 'Apply to joint of the elements' - it took a while.

  Subsequently, Time Machine indicated he had 139 + GB to save. My entire hard drive. A few hours later it's over. I have another drive in TM I don't NOT a back up before I noticed things that went wrong and what precedes has changed by Apple.

  Since then, and maybe this happened later, not sure about the timeline, whenever I open, edit a document Finder doesn't notice these different times. After reboot, Photos will tell in the Finder that the library has been opened and modifed at boot time.

  My problem/question is that gave me very bad advice to the "apply to joint points" at the level of my home folder (each data bit which is mine): I was not affected by the permission issues that were obvious to me. Everyone and everywhere I turn, I see and read that make is a very BAD idea.

  Now, engineering is looking at my things - but wonder if I have not passed the point of no return. I have my data on a disk with the flag is set to "ignore permissions" and uses iCloud photo library so if it is necessary to wipe and reload I don't have those things that I can count on.

  All wisdom is appreciated. Thanks in advance.

  H

  Here are a few alternatives to do right:

  Fix the hard disk and permissions

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  Repair

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. When the process is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  
  

  Fix the permissions for the folder

  Demarrer start in single user Mode , then enter each line of command by pressing RETURN after each:

  chmod-r n/Users/username

  chown-r username:staff/Users/username

  chmod 600/Users/username r

  After each command has run, restart the computer by entering:

  reset

• Folder permissions

  Hello

  I work in a field with W2008R2. I need to apply certain permissions to a folder in this way:

  -A security group that can list the contents of the folder, but cannot open any file.

  I try many combinations, but if the group can list the folder can open the files too.

  Is this possible?

  Thanks in advance for your help.

  Hello

  Questions about a domain network is adapted on the TechNet forums:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Thank you

• Can't access itunes as my computer error message - the itunes folder is located on a locked disk or you do not write to this folder permissions

  Original title: everytime I try to access itunes my computer sends a message "itunes folder resides on a locked disk or you have no permission to write to this folder" How can I access itunes?

  Why can't I access iTunes.

  Hello
  
  1. What problem is confined with iTunes? Can you access different files on the computer?
  2. what operating system you are using on the computer?
  
  Change the permissions on the folder / my music/itunes (and all subfolders and files) so that it is not "read-only". ""
  a. by doing a right click on the name of the iTunes folder, and then select Properties.
  b. you will see the read-only check box. Make sure it is disabled.
   
  Response with more information to help you.

• Shared folder permissions lost after several hours

  Hello

  I have problems with a shared drive mapped, sitting on a Forefront TMG server on the same domain.

  The problem is that I had access to a folder on the TMG server logs. Everything works very well for about 6 hours and then I lose access and I get an error message indicating that I do not have the permissions to access the folder, even if I do.

  Both servers are running Microsoft Server 2008 R2 64-bit.

  The two are running Mcafee anti-virus.

  Please help urgently, as this becomes a problem enough.

  Thank you in advance.

  Kind regards
  Robbie Flynn

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/forefront

• Reset the default Win7 folder permissions/owner

  Hi all

  This very early AM I was frustrated trying to access some records here on my Win7 x 64 box.  Went to the computer, right click on C:, properties, Security tab, advanced, owner and was the owner of everything...  On restart I get all sorts of funky errors like IE8 says that my default search provider is corrupted.  Gadgets/Sidebar does not load because "system.ini" is already in use.  Etc etc.  Of course, I don't have handy Restore Points...

  I tried the fix mentioned in the http://support.microsoft.com/default.aspx/kb/313222.  The manual and automatic version without success.  Before that I just wipe the area and reinstall everything (pretty please tell me I don't have to) is there a way to reset all the permissions of folder/owner failing?  I would even rather go back in and manually check each box for each user/system account to reinstall completely to be quite honest.

  Thanks for any advice or help - also tips to not change security settings system in the wee hours of the morning when you are half asleep not necessary...: p

  Forum Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/threads

  Link above is "Preparing for Windows 7" Forum.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is Windows 7 Forum, to more technical questions about windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot change file/folder permissions

  I have a two drive system. C:\ for programs, E:\ for data. After a failed win7 - win10 update, I was not is no longer able to use my OS on my C:\ drive. My drive E:\ already had an OS installed win7 so I went to use my E:\ drive as my OS drive (a parameter of the motherboard is the E:\ drive a C:\ drive).

  Now I have folders and files with an owner: unknown, unknown + user group group. There are several questions I've seen change permissions: explore-> properties-> Security-> username, and change or advanced.

  • Change the root folder is possible but does not propagate properly. Some files give the message diagnostic «permissions on are incorrectly categorized which can cause some ineffective entries» When this happens the popup Edit does not have a new username and the advanced pupup shows certain permissions with "Traverse folder / e...» ».
  • In the security popup open edition opens another pop-up window without a diagnosis, but the Add button is gray and inaccessible.
  • Change the owner on some records give a diagnosis of ' you are not allowed to read the contents of the Directory..» eml you want to change the permissions of the directory by permissions granting you complete control '. .

  There may be several issues. My problem is that I have more than 20,000 files. If I can't spread worldwide owner/permissions, then I have a problem.

  How can I clean my folders/files so that I can spread ownership/permissions correctly?

  Hello

  With the publication of the description, I understand that you are having problems to change the permissions of the files/folders on your Windows 7 computer. I will certainly help you get this fixed number.

  I suggest you refer to the suggestions of jbr549 responded on November 4, 2010 in the below mentioned thread and check whether it is useful or not:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/changing-permissions-to-access-font-files-folder/3f4da342-9a7d-4b5d-9b83-5f2b4bedcca5

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  https://support.Microsoft.com/en-us/KB/322756

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Folder permissions resets automatically after each reboot

  Hello

  I have windows 7 x 64 user. There is a problem with google reader I need different from that of the default permissions for C:\Users\\AppData\Local\Temp. I changed the permissions in this way: make a right click-> Security-> advanced-> permissions-> change approval-> clicked on include... inherited permissions and replace the child object permissions... Also, the folder option, I changed the hidden folders. However, after each reboot, I see not hidden files (hidden folder option resets to do not show hidden file) and permissions for resetting folder above. What causes reset of the changed properties? I have no optimizer tool except ccleaner. I use mcafee antivirus. I think that mcafee is unlikely to cause this problem. 
  How can I solve this problem? I tried to make the batch file that runs boot, but I can't use option "inherit permissions". I give you the batch commands:
  ICACLS C:\Users\\AppData\Local\Temp /setowner directors

  ICACLS "C:\Users\\AppData\Local\Temp" / grant everyone: F
  But these commands do not work to change the permissions in the manner described above.
  Help, please. Really need help.

  ICACLS C:\Users\\AppData\Local\Temp /setowner directors

  ICACLS "C:\Users\\AppData\Local\Temp" / grant everyone: F

  But these commands do not work to change the permissions in the manner described above.

  Help, please. Really need help.

  There was a similar post last week which unfortunately has fizzed out (as do about 95% of all messages...).  Maybe you can gather enough energy not only to track down the source of your problem, but also post an answer here.

  The following commands do not work:
  takeown /f "%Temp%" /.
  Cacls "%Temp%" / t/g everyone: F
  (answer Y to the prompt)
  And Yes, I know cacls.exe is deprecated. But it still works!

• Reports on the folder permissions

  How can I use powerCLI report on which groups active directory has permissions on a folder in the Server vCenter?

  The following script kind of handset 2 previous scripts.

  It allows to print permissions that applies models and virtual computers.

  But that can easily be extended to do the same for data centers and records. Also call the function get-permissions for the files and data centers.

  function get-permissions($vm){
      $vmImpl = Get-VM -Name $vm -ErrorAction SilentlyContinue    if($vmImpl){
          Get-VIPermission -Entity $vmImpl | %{
              Write-Host "`t" $_.Role $_.Principal $_.Entity $_.Propagate
          }
      }
      else{
          $templImpl = Get-Template -Name $vm -ErrorAction SilentlyCOntinue        if($templImpl){
              Get-VIPermission -Entity $templImpl | %{
                  Write-Host "`t" $_.Role $_.Principal $_.Entity $_.Propagate
              }
          }
      }
  }
  
  function get-children-reverse($entity,$path)
  {
      if($entity.Name -ne "vm"){
          $path = $path + "\" + $entity.Name
      }
      foreach($child in $entity.ChildEntity){
          $childfld = Get-View -Id $child        switch($childfld.gettype().name){
              "Folder" {
                  Write-Host ($path + "\" + $childfld.Name)
                  get-children-reverse $childfld $path            }
              "VirtualMachine"{
                  $vm = $path + "\" + $childfld.Name
                  Write-Host $vm                get-permissions $childfld.Name
              }
              "Datacenter"{
                  Write-Host ($path + "\" + $childfld.Name)
                  get-children-reverse $childfld $path            }
              "ClusterComputeResource" {
                  Write-Host ($path + "\" + $childfld.Name)
                  foreach($esxMoRef in $childfld.Host){
                      $esx = Get-View -Id $esxMorEF                    $h = $esx.Name+ "\" + $path + "\" + $childfld.Name
                      Write-Host $h                }
              }
          }
      }
  }
  
  Get-Datacenter | %{
      $dc = Get-View -Id ($_).id
      $folder = Get-View -Id $dc.VmFolder
      get-children-reverse $folder $dc.Name
  }
  

  The script will export all output to the screen.

  If you need it in a different format, let me know.