Shared folder permissions lost after several hours

Similar Questions

• recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the proce

  recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the processing of hundreds of images that I usually take on a weekly basis.  I bought a new faster laptop, but when I looked for the cd with the software of series and I couldn't find in the mess of Christmas.  I downloaded a trial version of lightroom and got, it works on my new laptop. Is there a way to access the serial number of my version already installed and insert it in the version of track to make it work for me?

  Myron

  If you take the time to register to your original with Adobe installation (which most people do not), you can log in to your Adobe account and get the serial number. If you use a Windows computer and still have access to the old computer where Lightroom is installed, you can do the following:

  1. in the window folder options, make sure that you are able to see hidden folders.

  2. go to the C:\ProgramData\Adobe\Lightroom folder.

  3. use Notepad to open the file, Lightroom 5.0 Registration.lrreg

  You will be able to retrieve your serial number of this file.

• Toshiba 40L7335D will turn off by itself after several hours of use

  My Toshiba 40L7335D TV periodically turns off by itself!
  Bought a few days, everything else works perfectly during the day, but after several hours of use of the TV is off!

  Is a problem that someone else has or knows?

  Please see the user manual * page 74 *.
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7335-4050-English.PDF

  _Energy saving Settings_
  + The TV automatically turns off (standby) after 4 hours, if you do not use not the TV, either from the remote or the TV Control Panel. +

  and

  _No signal Power Down_
  + TV turns off automatically after 15 minutes when no signal is detected.

• When you use your hard disk defragmentation process starts but seems stuck and won't end evn after several hours. How I can remidy this?

  When you use "Defragment your hard drive" the process starts but seems stuck and won't end evn after several hours.  How I can remidy this? I was already able to defragment successfully.

  Hello

  How do you know that never, it ends when there is no GUI on Vista for Defrag?

  in vista, the defragmentation process works silently in the background

  Unfortunately in vista it does not provide a GUI to show progress as it did in xp

  to do this, you'll need 3rd party defrag programs

  read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

  http://www.SnapFiles.com/get/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/get/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

  http://www.SnapFiles.com/get/puranfree.html

  Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

  http://www.SnapFiles.com/get/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

• HP Pavilion dv6 - 2151cl goes into Hibernation Mode after several hours in Standby Mode

  Hello

  Generally, I leave my laptop plugged in and Standby Mode when I don't use it.  I noticed, after several hours (12?), that the power led has stopped flashing.  When I press the power button, it starts as if awakening from Hibernation Mode.  I am using the recommended HP Power Plan but can't find any option to explain what is happening.  Is there a way to avoid change of Mode of Hibernation of Standby Mode?

  TIA

  Hey noahrhys,

  Don't worry - this is normal default behaivor to save energy. It is fully configurable! You can adjust it never Hibernate mode or hibernate after a longer time - whoever you want - all while keeping the mode 'sleep'.

  Here is how to adjust this setting (assuming you are running Windows Vista or 7):

  1. Near the clock on the bottom right, right click on the battery icon.
  2. Click on "Power Options" and a new window will open.
  3. Next to the selected power management, click on "change plan settings".
  4. In this new screen, click "change power avancΘs."
  5. Look around until you find the category of 'Sleep' and expand by clicking on the + next to him.
  6. Find the "Hibernate after" category and expand it by clicking on the + sign next to it.
  7. Adapt these 2 values (on battery and sector) to one that you would like (type in the minutes). You can also type zero (0) to disable Hibernate completely.

• Permissions lost after reboot

  Hello

  I have an installation of ESXi 5 on a DL380G6, server is automatically added to the esx fine, admins Add Group field, works very well.

  If I add another group, it works until the server is restarted, and then the group is removed from the permissions tab. I tried several groups and the same thing happens.

  If I change the setting advanced under Config > host Agent > Plugins > hostsvc > esxadminsgroup to another group, it remains after a reboot, as well as the Group admins to esx, if I may change back the group is lost after a reboot.

  Is there any solution for this?

  Thank you.

  ESXi works in RAM and configuration data are not saved in real time on the edges.

  Wait at least 1 h before the reboot of the host.

• HP officejet pro 8600 more - cannot access internet after several hours

  HP officejet pro 8600-after that I re-boot, I can access the internet for several hours, but after awhile, I cling on websites, I try to go to. If I unplug the printer and restarting, I accecss all websites all the time. I thought iwas hooked on a scan (which was never initiated by me), but I'm not sure. Any suggestions? I'm running on a Dell XP laptop.

  Thankx

  Hello

  Please visit the link below to fix the problem.

  http://support.HP.com/us-en/document/c03149924

• Adobe PCD folder permissions change after the launch of CS5 programs

  There is a seemingly important issue for Creative Suite

  5 licenses: C:\program files (x 86) \common files\adobe\adobe pcd

  Unfortunately the default permissions after installation (standard installation or install Adobe enterprise deployment tools) are:

  Everyone: read

  Administrators: Full control

  This is a problem for the use of the software, if your users are not local administrators.

  If you change the permissions of the folder to grant access to other users, launch InDesign or Photoshop, Adobe PCD permissions back to their original settings.  I checked my permissions to save well by closing and reopening the folder permissions.  It is only after a CS5 program was launched to return permissions.

  How can I get residence permits?  So far, I make people admins local, which is not good, if they find out.  They will install all kinds of crapware and legitimate crappy software and break their computers more far.

  Thank you

  Josh G

  Portland, OR

  Found a solution to get Acrobat 9 Professional to work without giving users admin rights.

  1.), connect as admininstrator and give the control total of users on the following folders and all content (replace permissions on all child objects):

  • File Adobe in Program files.
  • Adobe common files folder.
  • Files common Macrovision.

  Run 2) program as admin first to get rid of some of the regisration and user login guests to try.  It should work now.

• After several hours of time, BSOD and it asks to run without failure or normal screen mode

  Hello

  I had this problem for a month, after 1 to 10 hours from the time of execution (occurs to me after an hour or half a day)

  my computer hangs just to the page black screen in safe mode, no errors or anything, even when I run back normally.

  Ive been looking around for quite a while now, try bugs from various websites and suggestions.

  I type of major changes to the system that I did the last half a year.

  Accident can happen in playing a game or even your browsing Firefox. Maybe she took place even though I did not use the computer, came back, and it was restarted. Things I suspect is either faulty RAM, perhaps poorly applied thermal paste on the CPU fan cooler? The two monitors that I have connected? Insufficient for new updates that are listen below cause the PSU stress itself? Tests I've tried on the stress after an hour of running time, I can not stress just before the cause of the accident that I don't know when it will happen. May be peaking suddenly what related material.

  More news a few months (more) I installed a Neovo 19 "F-419 19 inches in addition to my SAMSUNG 24" syncMaster B2430L display screen:, my main one is the 24 "one.

  New its add-on card: using an extra sound card that works OIC Configuration Audio-3D, 3d Audio Engine: Xear3D, Audio CODE: CMI8738, worm 7.12.8.1740. Looks like an old, I tried looking for program updates but has not been successful. Using this soundcard for its 4 jacks 3.5 mm for use headphones 5.1 surround.

  Computer specifications previous (two years, installed in the laboratory of the shop where I bought it):

  PSU: HEC 600W 12CM FAN A.FPC WIN + 600

  CPU: Phenom II 955 Am3 AMD Q.C.

  MOBO: GA790XT-usb3 Am3 + GIGABYTE AMD

  GPU: ATI Radeon 5770 1 GB-5 MSI

  HD: 500 GB 7200 16 MB SEAGATE Sata2

  MEMORY: VALUE GEIL 2x2G (4 GB) DDR3 1333 MHZ

  DVD: AD7240S SATA SONY OPTIARC DVDX24 DL

  OS: WIN 7 HOME PREMIUM 64 - BIT ENG

  Specifications of current computer (I installed all of these additional components myself with a friend, checked everything twice recently):

  PSU: HEC 600W 12CM FAN A.FPC WIN + 600

  NEW * CPU: Intel Core i7-3770 3.40 Ghz

  MOBO * NEW: MSI-7798

  GPU * NEW: Nvidia Geforce 660 Ti MSI

  HD: 500 GB 7200 16 MB SEAGATE Sata2

  MEMORY: VALUE GEIL 2x2G (4 GB) DDR3 1333 MHZ

  MEMORY * NEW: 2xKingston 2 GB DDR3 1333 Mhz Pc3 - 10666 that was added in addition to the previous Ram

  DVD: AD7240S SATA SONY OPTIARC DVDX24 DL

  OS: WIN 7 HOME PREMIUM 64 - BIT ENG

  Things I've tried:

  You use check to highlight my drivers, he did cause a blue screen and my computer has not started. I didn't know how to proceed from there however.

  Stress tests my CPU, GPU, PSU temperatures were not unusual or high. Downloaded my MSinfo32, DXDIAG and my last crash DUMP in this link, the rar file. http://rapidshare.com/share/84E3783BE3B66979375E6D2B2C2E7A56

  CCleaner ran in safe mode, fixed broken files and etc. "."

  A ran AVG in Mode safe, Full scan both hard drives. Nothing found.

  My computer case is half open, helping the ventilation and verification problems with cables that are not connected correctly.

  Uninstalled all unnecessary programs.

  Posing this thread.

  If you need other information that I forgot to mention, please tell me that I will do my best to post it here.

  Thanks in advance to all who read this.

  Hello

  The attached file of the DMP is to bug checking DRIVER_VERIFIER_IOMANAGER_VIOLATION (0xC9) .

  This is the verification code bug for all the Verification of i/o Driver Verifier violations.

  Cannot load the image dtsoftbus01.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for dtsoftbus01.sys
  ERROR: Module load completed but symbols can be loaded for dtsoftbus01.sys
  Probably caused by: dtsoftbus01.sys ( dtsoftbus01 + 1360 )

  -FAILURE_BUCKET_ID: X64_0xc9_23e_dtsoftbus01 + 1360

  Driver found dtsoftbus01.sys auditor perform invalid function calls, causing the corruption of the system. This is the driver for Daemon Tools. Daemon Tools is a very popular cause of BSOD in 7/8 base systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.

  Kind regards

  Patrick

• Download folder permissions seeds after Time Machine

  I recently restored my downloads folder full of time Machine to the top by car. I HAVE NOT USE TIME MACHINE for THIS... just slip and fall.

  A LOT of the files/folders have a permissions or problem of blocking or something.

  When I try to delete them, I get the "Finder wants to make changes. Type your password to allow this. "message.

  HOW CAN I FIX IT?

  Permissions for individual files look right. Locked is not checked.

  

  Downloads folder looks like this, but I don't know if this is right.

  

  I used Onyx to "repair permissions" on the drive, but that has not changed anything.

  Can anyone help?

  This procedure is a diagnostic test. It makes no changes to your data.

  I tested these instructions only with the Safari browser. This is what I suggest you use, even if your favorite browser is something else.

  Please triple - click anywhere in the line below on this page to select:

  /bin/ls -@Oden ~/Dow* | /usr/bin/pbcopy

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

  The Terminal window does not display the output. Please do not copy from there.

• PC disconnects the VPN after several hours, can not reconnect until you restart the PC.

  Hello

  I started to use a VPN private for a video game in general since last month, but I started to run into a problem, I can't fix... my PC tends to disconnect the VPN after awhile (6 ~ 12 hours of use?) and I can't reconnect to any VPN until I restart my PC.

  However... my normal internet connection seems to work very well.

  When I try to reconnect to the VPN after I fell, I'm greeted by this error:
  http://PUU.sh/bicqT/0a6f1f8537.PNG

  I'm on Windows 7 64 bit and I use the VPN client by default windows... idk what's his name, it's putting you in the network and sharing Center.

  I tried the following things:
  * restart the network map
  diagnose the issue with windows network diagnostics 7
  * / Clear DNS cache
  * / release and / renew lease
  * reset the internet connection
  * using the internet connection of a neighbor and I am still unable to connect to any VPN until you restart the PC.

  -diagnosis after disconnecting from the VPN wireless adapter arrives leads to this...
  http://PUU.sh/bibQs/9873c02068.PNG
  http://PUU.sh/bibn7/93ec6f0934.PNG
  http://PUU.sh/biboF/3c9f865f15.PNG
  http://PUU.sh/bibpw/b204c59f01.PNG
  http://PUU.sh/bibq9/a10d3246d1.PNG

  I can't fix it through diagnostics.

  In any case, this is a problem on my end because I share the VPN with 2 other friends and they do not suffer this problem... > _

  If there is a lack of information, please tell me and I will provide.

  Thanks for any help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• WiFi connectivity is lost after 12 hours on 32RL938

  Hi all
  I have a very strange and annoying questions on my 32RL938 aruond wifi connection.

  I set up the TV and connect to my wifi at home and everything is very well four approximately 12 to 15 hours.

  After leaving the TV in standby for a while (let s for example during the night) when I start it up again, I realize that, although my TV says it s connected to my local WIFI s there is no access to the drive Toshiba Places or DLNA network.

  The network connection test fails also.

  If I check on the router to the TV has a valid IP address and look connected, but no matter what ping test it s ip fails.

  The only solution I was able to identify this problem is to restart the router.

  After the reboot, the TV connects fine to my network and I can access the Internet on this subject.

  What is very strange, it's my house, I have 6 other wi - fi devices (laptop, phone android, printer, Tablet, etc.) that work perfectly well as my TV shows that there is no link.

  Because the ruter is not in my room it is quite difficult to restart every day.

  Please let me know if you experience this kind of behavior and what could I do about it. I also tried with static and dynamic ip for television, but the behavior is the same.

  > The only solution that I managed to identify this problem is to restart the router
  > After reboot, the TV connects fine to my network and I can access the Internet on this subject.

  For me, it looks like a problem of router and not as a problem of TV connection.

  But you can also check if the latest firmware is installed on your TV

• shared folder of intermittent 'incorrect password' failure - w7p - w8p

  Problem: unable to connect regularly to a shared drive on w7pro turn of the computer laptop w8.1pre (pro).

  Expected result: click the shortcut on the desktop to the laptop, on a shared drive on w7 Tower.  Shared drive w / all of its shared folders is visible, reading/writing as always.

  What #1: get the dreaded window in "sign".  No password doesn't work.  Signed in as a local user account or ms no difference.

  What #2: after "awhile" (time incompatible Beach, 5 min to never work after several hours, until it works fine the next day): the player will be present.

  Yes: I am able to ping the Tower of w7.  If I try to unc in a window of the Explorer or CLI, if it doesn't work in CLI, then msg is: "the user name or password is incorrect."

  - So, what makes the user name or password later, without my duty to implement MS advice to 'reset password'?

  -While both computers have DHCP, their deals default IP address remains constant in the router.  I don't know how do for "free & renew" otherwise than in CLI, but it made no difference.  Is there a way to update the addresses?  Is this even fix the problem?

  If someone has solved this?  Thank you.

  Hello

  The computer is on a domain network?

  If the computer is on a domain then this problem would be better suited to the TechNet community.

  Reference:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Data store lost after SAN restart / modify LVM. EnableResignature

  Hi all

  We just had a blackout (planned) and once we have start the SAN and the ESX, one of the LUN seems to have disappeared. I tried to anyone she / it presents another ESX, it seemed that the server did not recognize that it was formatted in vmfs. He would see only as a new partition and asked to formatted it again. After several hours of research and testing, I was able to get my store of data by changing the value of LVM. EnableResignature to 1. Rescan HBAS and he was there like an old snag-00000002-DataStore name... From there a creation of computer virtual and added new disc, from the existing drive and pointed at my old vmdk files. I have no idea of the will what exactly is and if I can set it to 0 (or I'll lose all my vm once again) and why a data store had this problem?

  Any idea?

  That's right, don't let not the will option is enabled.
  This event does not occur very often.

  http://blog.laspina.ca/

• The permissions of the shared folder on linux using kerberos hosts

  I'm having a lot of trouble with permissions on a shared folder.

  The root of the problem is that the uid/gid of the user of the host are different from those of the guest user. The guest user performs authentication kerberos and if their uid/guid appear not in/etc/passwd (do, obviously appear in getent passwd, but only later once kerberos and winbind began).

  In other words, forcing the * home * uid t to be the same as the (possible) * comments * uid would not work.

  What I need is:

  1. to remove the/mnt/hgfs after kerberos has started and then replace with the correct uid/gid obtained from kerberos.

  But I can't do it because a kernel mismatch won't allow me to mount hgfs actions (device not recognized)

  If someone knows a solution I'd be glad to hear that this would solve the problem very easily

  OR

  2 force the mount initial hgfs at boot time using a certain uid/gid (these are fixed for a given machine)

  I have looked everywhere but could not find a config file that would allow me to do.

  Is this one? Where can I find it?

  Thank you very much.

  I fixed that by removing the part and the remouting with:

  vmhgfs-fuse .host: / $MOUNTPOINT o auto_unmount, uid = $UID, gid = $GID