Muse: Change your appearance with a rolling status button
Hello
I am a novice user of Muse (demo actually), try to duplicate a simple "mouseover"effect html in Muse with a widget of the State to control the appearance of a graphic element that is superimposed on a page." Can I pop in a gif on top of the basic element (also gif) so it aligns correctly?
What is necessary to simulate this simple mouseover effect? It will involve a layer or a widget of the State to fight against it? The two? I saw the method by which a background or text can be modified and assume that the same thing can be made to a graphic place-make it appear on mouseover (rollover). Unfortunately, there don't seem to be. Can you help me?
Finally, I used the widget from the State to the visibility of the items pop. This seems to work best for me.
Tags: Adobe Muse
Similar Questions
-
Change the appearance of the approve/reject buttons
I was wondering if someone played around with changing the appearance of the button approve and reject the mails for customer approval. I have a client who is very sensitive to aesthetics and I would replace the buttons to something a little more fun. Because the buttons are automatically generated on the field [EMAIL_INCLUDE_MMAURL], I don't have much control over them. Not sure if this could be done with style sheets, or if I could add my own images on the dyamically model create my own mailto: command?
I think that there is another option also (maybe a lot easier than this things stored procedure). =)
If I understand correctly, you should be able to specify formatting buttons MMA in the files HTMLMAIL_MMALinkStandard.htm and HTMLMAIL_MMALinkApproval.htm.
Just check the e-mail folder to locate these files and try to change them.
-
Possible for users of the Web site to change background .swf with click of a button?
Hello
With the help of Dreamweaver CS4, I manged to create a temp 'under construction Web site. This site has an .swf fullscreen loop in the background.
I made 4 of these short loop of the .swf files.
Is it possible, by adding a simple button on the screen to the user by a click and the next background .swf starts playing? So basically this key is a 'next' button, and every time he clicked on the next begins to play .swf.
Web site: www.fatkatmusic.com
PS: check the source code. The flash background code starts from of ' <! - background flash - > '.
Also, I know that the css and html could be written a little better, but I just wanted to know if what im asking is possible...
Thank you
Ray
You could build a fifth file according to what is other files and touching you mention.
-
In Muse, is it possible to do a status button opens a menu accordion?
I am building a phone version and I want a button to open the menu accordion that I put in the header.
Please see this:
https://www.YouTube.com/watch?v=Thm8bsNccvI
https://www.YouTube.com/watch?v=dQy_lj0ZXss
Thank you
Sanjit
-
Why my status of Messenger automatically change to appear available offline when I check my E-mail?
Why my status of Messenger automatically change to appear available offline when I check my E-mail?
Thank you all, because I have found & tried the following & it seems to work for now...
With messenger open downstairs, I then open internet Explorer and went
on the website of hotmail to check the mail. Make sure it is not checked to remember
Connect you and me
I then went to the top right of the screen and click on the menu drop down and
Click appear offline. Then I disconnected and closed the site. Live messenger
running in the background all the time and since then to do the above, I did not
has a question
-
Yesterday, I changed the appearance of the toolbar that I question, however, I don't like it and want to come back to what I had before. However, I forgot how I did it. Help, please. Thank you.
See the hidden menu bar
Thank you
Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.
-
Is it possible to create a slideshow of heroes of filling full browser for your Adobe Muse CC homepage?
Terry White has a video that shows that it does that in a part of the site, but I want my hero image to fill in the whole browser.
Thank you!
If you want the legend to display on some Images of heroes, then try the following steps.
1 open the control panel of the slideshow Options full screen and uncheck the box "Edit together.
2. go to the image of heroes who would have no legend.
3. Select the legend and make its filling like "No fill" and do the same with the text inside the box of legend as well.
Note: As this is the slideshow widget you cannot add external text on an image of the slide show/hero. legend text box and only relativity with Image of hero.
Kind regards
Vivek
-
Hello, I am wrong come to order this confirm us that you have changed your subscription to creative cloud Acrobat Pro DC single-app-membership (one year). We are pleased that Adobe can help you cope with your work. Information about your subscription: • product name: CC single-app-membership for Acrobat Pro DC (one year) • subscription start date: August 24, 2015 (PT) I would be initiating phone < deleted by the moderator > mail sincerely Dan Bundgaard < deleted by the moderator >
(Double Post)
-
How can I change the settings so that your handheld with substitute Office?
I know it's a very simple question, but I can't find the option anywhere in the software of my Palm, but how can I get to the place where I can change the settings to make your handheld with priority to the office and vice versa?
Thanks in advance!
in your taskbar in the lower-right corner right click on Hotsync Manager then...
For Palm Desktop 6.2
Settings > applications > then you can stocks to HH o DT for the agenda, the address, the list of tasks, Notepad,
For Palm Desktop 4.2, 4.1, 4.1.4E
Custom > you can then change the actions for all the PIMS
-
How do you change your payment? My muse has expired and I can't change it.
'Tips' Adobe 'change' your payment and your credit card:
What I get:
What should I do?
Hello
Please contact customer support for this issue.
Here is the link:- https://helpx.adobe.com/contact.html?step=MUSE
Kind regards
Rohit Nair
-
Change the appearance of the status of change tracking formats?
Hi all
has that someone managed to change the appearance of the condition FM8_TRACK_CHANGES_ADDED and FM8_TRACK_CHANGES_DELETED formats. They appear in the user interface, so I tried through the MIF file. First I wanted to use the digital underscore, because it seems generally much better than the standard underline. So I put in
< condition
< CTag "FM8_TRACK_CHANGES_ADDED" >
< CState CShown >
< CStyle CNumericUnderline >
< CSeparation 10 >
< CColor "Waldgrün" >
< CAndCondition >
> # end of Condition
but after the opening of the MIF, everything is as before. As if the original settings are pre-cabled somewhere...Any ideas?-Michael Müller-HillebrandMichael,
I tried the same thing (a MIF version to the Assembly) a while ago and it always comes back to the defaults when opens again on the FM band. So I guess it is wired. (Much the same situation than to try to replace by a customized version of the headerPDF.ps file to fix things in the output CMYK for FM9).
-
Everytime I open Firefox I get a message: "an attempt to change your home page has been blocked" and firefox crashes.
I unintalled (on my MAC) and reinstalled twice. Makes no difference. Any suggestions?Could you try starting Firefox in Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.
Does not work if Firefox: Hold down the option key when starting Firefox.
If Firefox is running: You can restart Firefox in Mode safe mode using either:
- button "3-bar" menu > "?" button > restart with disabled modules
- Help menu > restart with disabled modules
and OK reboot.
Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).
Any improvement?
While you are in Mode without failure, you could copy a list of your extensions and paste them into an answer? The best place for this is the support information page - either:
- button "3-bar" menu > "?" button > troubleshooting information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
Scroll down to the Extensions section, and then select from there until the end of the following table with the mouse and copy. Then paste into a response. It may seem a bit messy but don't worry, we're used to it.
In addition, if you check your homepage settings, he changed? This article explains where to find that page preferences: start-up, homepage, tabs and download settings.
-
How can I change the appearance of the web site of the TITLE of each search result?
Hello
recently the results of a Google search have changed their appearance.
They EMPHASIZE now is each individual "title" of each web site's search result.
This makes it very difficult to read the results actually; they run together.How can I change the appearance of results BACK to what it used to be, with each title of web site said without running over them with the cursor.
I guess I downloaded automatically a NEW version of Firefox.
Let me go back to the original version please.HOW CAN I DO THIS?
Thank you
Wade AgnewTo avoid any misunderstanding, Firefox is not a 'search engine', nor Firefox has its own search engine - its strictly a web browser. If you do a search in the address bar, the search engine that is selected in the search bar is used.
In addition to the cookies and cache, as phillip mentioned, if you have a Google + or account Gmail are logged in Google when that happens?
If so, have you tried logging in your Google account to see if it changes anything? -
Hello
I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.
The 'Intermediary' folder is present and rest after a restart, but the extensions do not get installed. They show in the extensions page with the message "will be installed after you restart Firefox" and remain like that, no matter how many times I restart.
Any idea?
Under Firefox 24.0 Windows 8.1
Thank you very much
BDP.S. Just tried to install the add-on "convenience store" before asking the question and I got an error saying that it cannot install because it cannot change the necessary file. (I did manually instead)
I tried to delete the files extensions.* nothing works. However, I deleted the addons.sqlite file and restarted my computer (computer not only Firefox) and that seemed to do the trick. Problem solved.
Thank you for your help, it is appreciated.
-
Requirement of password "you have to change your unlock iPhone code access in 52 minutes.»
My father is very upset and frustrated, and so I am. I hope that we can be compensated in some way (but probably not).
My father unlocked his iPhone 5 as usual, then he got a notification on the home screen that says "password requirement you need to change your unlock iPhone code access in 52 minutes.» We have never seen this before notifcation, and my sister and I have an iPhone more than 6/6. I told my father to simply ignore it, but then he kept appearing whenever he has unlocked his cell phone, so I told her to choose continue.
He chose to continue, changed the password from one to 4 digits long, and then he picked up his phone.
Restarts, the phone prompts you to put in an access code to the first newspaper in attempt before it allows you to use the contact IDS. It introduced the new password, but it didn't work. He tried several times, and now it shows there are 60 minute wait. At this point, it just goes to continue to put in the access code until it restores his phone.
Why did this happen first? It has a 5 under AT & T's iPhone with the latest version of iOS.
The new password longer trying to capture is correct, because when you create the password, it asks you to enter twice, and he could not continue if he does not get it right twice. So why the code was not working?
Hello gabemstr,
Thank you for using communities of Apple Support.
I see in your message that your dad's iPhone shows an error saying: requirement of password you need to change your unlock code. It seems that your father has a managed iPhone, with a profile that is installed on it. When a device is managed, it can have certain requirements for password as an age of access code. I suggest your dad gets in touch with his staff, or deletes the profile.
By default, the authentication of the user code can be defined as a six digit on taking devices PIN supported Touch ID or a PIN digit on all other devices. In iOS, you can choose from a comprehensive set of password policy to meet needs of your security. These access policies may include requirements for:
An access code on an iOS device
An alphanumeric value
Minimum length of password
Minimum number of complex characters
Maximum password age
- Delete the configuration profile provided with the application.
- Go to settings > general > profile, tap on the configuration of the application profile.
- Then click on delete the profile. If requested, enter your device password, and then press DELETE.
- Restart your iPhone, iPad or iPod touch.
How to remove an application that has a configuration on your iPhone, iPad or iPod touch profile
Take care.
Maybe you are looking for
-
Hi, I dropped my phone a month ago and I still didn't we go to repair. My phone screen is broken and the LCD screen is cracked so and it still works, but I can't do anything else that press the button on/standby to check the time. In addition, the sc
-
Designjet T120: HP T120 error BA7F11E0 designjet
We have a HP designjet T120 when power on/off, this (BA7F11E0) error message appears on the screen immediately. No movement of transport or initialization is performed. Just the error and nothing else. Pls help. Thank you
-
80154013 error when you try to manage the Xbox Live account
What - what it means and what I can do about it?
-
error 0X800f0214 when you install the printer driver
When you install a printer driver (network), an error message appears saying that the action could not be completed - error 0X800f0214. The printer is shared and my firewall is set to off. I have absolutely no idea on what to do and would like to get
-
my windows print function closes this window and give me and error__
When I try to print, tell an email. I click on print and clik ok when the printing Panel appears. I get a message that windows closes the window and the error. But it don't not to give reason for the error