Muse output shows Farbunterschiede

Similar Questions

• How can I integrate a database with pictures of Muse (to show a catalog)?

  As you can imagine, Yes, this question has a hidden background (e-commerce), of course. Muse is a window of gold to all those designers who see that it is possible to create a Web site without using code easily. But sites need rich content, which change from time to time. I would not treat right now with e-commerce, let's go step by step.

  I wonder about the integration of a database with muse, to show a catalog (for example, an inventory of products). Let's say I want to show that the products I have (but for now) I don't want to sell them.

  So I have a file access, with several fields: name of the product, quantity, Description, Maker and the last field is a field of image showing a photo of the product.

  I already have this database in access and I can open it in access, change it, watch it, browse my products, etc.

  Now, what I want is to see the Muse of this database in a page, so I would like this Muse read my database from access file and allow me to view the areas of access to the position I want (Muse) and which also include the image field.

  I want to add two buttons, left, right, to move backward or forward through the records of my database.

  Can I do this in the Muse?

  How?

  You can either use object > insert html code or an ifame to view the product page that exists on the end of your purchase (server).

  For example, if you are using Business Catalyst you can then create products on the end of BC and then use products module in Muse page. Once the module is used, it would make the products.

  The same with third party shops, you can use their output html for the page of the Muse.

  You can view the sample videos:

  http://tune.PK/video/1589742/Adobe-Muse-ecommerce-online-store-setup-by-Muse-themescom

  https://www.YouTube.com/watch?v=Vs4aSBkXMo0

  Thank you

  Sanjit

• Cannot download Web site at businesscatalyst host of muse, it shows the connection timeout.

  Cannot download Web site at businesscatalyst host of muse, it shows the connection timeout.

  Hello

  Please see the link below that has the same discussion.

  https://forums.Adobe.com/thread/1934384

  Kind regards

  Vivek

• Muse-slide show

  Can you end a slide show of adobe muse once he plays once?

  Hello

  I fear that it is not possible at this time.

  I would recommend that you add to the ideas here, section http://forums.adobe.com/community/muse/ideas

  Kind regards

  Abhishek Maurya

• Adobe muse "output now error and will met" why this continue to happen?

  So this is my first time properly using muse for a project and now everytime I try to make a change to my page it comes up with a message saying that muse has encountered a problem and will now exit (I took a screenshot of the message), but I do not understand why or

  If there is anything I can do to stop it? its driving me crazy I have a deadline coming!

  any help would be greatly appreciated!

  I currently installed on my laptop through the creative cloud on windows 8.1

  A student stressed out!

  Hi Jennifer, thank you for sharing file

  I sent the file to the team of concern, and they will answer you by e-mail.

• Site Web of Adobe active Muse not showing is not Up after extraction HTML

  I have created a website using Adobe Muse, exported the Web site in html format on my desk and now download it using cpanel. The site I can open and see but look like, there is no images on the website I've added while making it to the muse. The current folder is also present separately on my desk. Shouldn't it also export the images when he was all export to html format.

  What should I do?

  I managed to solve this problem. First of all, make sure that you load the data using built in FTP in Adobe Muse to avoid any problems. Although you can also use some other FTP, but it is more work compared to the ftp option already present in the muse.

  In my case the problem was due to permissions assigned to the images on my host. I contact my host and has asked that the images are not displayed. They corrected the permission and now my site is online.

  I've seen similar questions by users asking the solution for the same problem. You have to contact your host and ask them to fix the permissions.

  I hope this helps!

• Get Queue Status output / empty the queue

  Hey everybody,

  I am trying to create the program that will record all the data in a queue after a number / deadline is met.

  However, when you try to save the output of the Flush queue / status of the queue, I'm not sure how to proceed. My original entry is a group of 4 elements.

  The output shows that it is "an array of clusters of 4 elements..."

  My initial approach was to: change of the table to a group (of 8 items)-> separate each element in another group 4 elements-> merge each specific item to get a unique flow of each of the 4 original elements.

  Result: 1 table-> 1 cluster-> 8 clusters-> 4 data streams, each stream of data representing one of my pieces of original entry (my goal).

  However, this seems to be a long process and I can't help but feel that I'm on in a much simpler way to do.

  I would now like to know if it's the only way I can save each of the indivudual 4 elements in the original 'picture of clusters of 4 elements' produced from the Flush queue / status of the queue?

  Also, is there a way to save/log ALL the data directly from the Flush queue / get an output of status of the queue (jump cutting/splitting of process data)?

  Thank you!

  What you really want to do, is use Dequeue item inside a FOR loop.  Inside the loop, ungroup you your cluster and the output values of the wire.  Let the loop FOR the autoindexing and you will have a different picture for each item in your cluster.

  See the example I did here: http://forums.ni.com/t5/LabVIEW/TDMS-File-starts-recording-data-at-20Hz-but-after-a-short-time/m-p/3...

• RAID battery showing as degraded, but is - this?

  Hello everyone, I have a PowerEdge 2900 server.

  BIOS version: 2.7.0
  RAID driver: 2.24.0.64, A07
  The RAID firmware: 6.3.3 - 0002, A-00
  OpenManage: v7.4, A00 w / patch v7.4.02, A00

  In the OpenManage software, under System--> Storage--> PERC 6 / I integrated--> battery, the battery shows 'Deteriorated' with the 'next time learning' showing only 0 hours.

  I tried to choose 'Start Cycle to learn' in the dropdown menu, but that doesn't change anything. I also tried to change the 'Cycle to learn late' at a time, but after this time, nothing happened and that the 'learn maximum' is now showing only 0 hours as well.

  Then, I opened a command prompt and run the command of omreport storage battery - output showed the same information as the OpenManage web interface. I then ran the action of omconfig buffer startlearn = = 0 = 0 command battery battery and got a successful command! message, but this does not seem to start the learning process.

  In the past when this has happened, I would like to restart the server and battery then begins a learning cycle and everything would be fine. So I rebooted the server yesterday in the hope that it would enter into a learning cycle. But this time, even after rebooting, the battery is always degraded showing.

  The log shows these events happening during the restart mentioned previously:

  T23: EVT #53554 - T23: 141 = battery is

  T23: * BATTERY CHARACTERISTIC PROPERTIES *.

  T23:  _________________________________________________

  T23: Auto learn period: 90 days

  T23: Learn next time: 0

  T23: Battery ID: 39320b 78

  T23: Delay in the meantime read: 167 hours from the scheduled time

  T23: Scheduled next Learn the: 01-07-2000

  T23:  _________________________________________________

  T23: * BATTERY DESIGN INFORMATION *.

  T23:  _____________________________________________

  T23: Capacity: 1900 mAh

  T23: Design tension: 3700 mV

  T23: Specification Info,: 1f40

  T23: Date of manufacture: 9.18 2008

  T23: serial number: 2936

  T23: Pack status-Config: e48c

  T23: Name of the manufacturer: SMP - PA

  T23: Device name: X 848389

  T23: Device Chemistry: LION

  T23: Design data: a0e072d7

  T23:  _____________________________________________

  T23: * BATTERY CAPACITY INFORMATION *.

  T23: _____________________________________________

  T23: Parent State of Charge: 100%

  T23: Absolute State of Charge: 74%

  T23: Remaining capacity: 1408 mAh

  T23: Full Charge capacity: 1408 mAh

  T23: Vacuum time: 65535 Min

  T23: Average time for vacuum: 65535 Min

  T23: Average time for Full: 65535 Min

  T23: Cycle Count: 38

  T23: Max error: 2%

  T23: _____________________________________________

  T23: * BATTERY TRACK INFORMATION *.

  T23:  ____________________________________________________________________________

  T23: Temperature: 30 C voltage: 4056 V

  T23: Current: 0 my GasGaugeStat: c0

  T23: GPID: a8ffb899 ChargerStatus: 1

  T23: Remaining capacity: 1408 mAh full load capacity: 1408 mAh

  T23: Stat Relative load: 100% FwBBUState: 1

  T23:  ____________________________________________________________________________

  The only other battery showing later events are:

  03/05/16 19:37:30: EVT #53577-05 / 03 / 16 19:37:30: 149 = battery temperature is normal

  03/05/16 19:37:30: EVT #53578-05 / 03 / 16 19:37:30: 163 = current battery capacity exceeds the threshold

  03/05/16 19:37:30: EVT #53579-05 / 03 / 16 19:37:30: 242 = full battery charge

  03/05/16 19:38:35: EVT #53580-05 / 03 / 16 19:38:35: 155 = reprogramming of the battery in the meantime: battery is under load

  This information means that RAID storage battery is still able to keep the cache in case of failure? All virtual disks are still show that the use of writing political back - don't know if it would have changed to write through if there was indeed something wrong with the battery.

  Thanks for the help!

  Hello.

  I see the controller firmware and the BIOS is up to date and absolute State of Charge is 74%, which is good. Clear the system event logs and try to re-allocation of places the battery. See if it will re - start the learning cycle. If it does not omconfig battery action = startlearn controller = 0 = 0 battery command again.

• exit show me the same MAC address twice

  Hi all

  and easy for sure. When I run the interfaces see the G0/1 command on switch, why the output shows me the same MAC address twice?

  the address is 00d0.58c0.4519 (bia 00d0.58c0.4519)

  I know, BIA is burned in address and is located on the ROM, but what is the idea behind this?

  EDIT: also would like to ask, why a router maintains an arp entry for its own interface, it seems that this is not the case on for example a Windows laptop...

  Best regards

  Adam

  Adam,

  Some interfaces allow you to configure user-defined MAC address:

   R1#show int f0/0 | i bia Hardware is AmdFE, address is cc00.0fac.0000 (bia cc00.0fac.0000) R1#conf t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int f0/0 R1(config-if)#mac-address 0200.0000.0001 R1(config-if)#do show int f0/0 | i bia Hardware is AmdFE, address is 0200.0000.0001 (bia cc00.0fac.0000)

  HTH

  Rolf

• Muse (live) site import/overwrite

  I got muse installed on both computers.

  Computer - was the last version of my site downloaded through muse, computer has crashed and died, beyond recovery.

  Is it posible to import the live site in computer B and continue to make the chnages?

  If not, and I rebuild the site from scratch, there will be duplicates/coruption/complications if I decide to download the new version by muse/ftp?

  If not either, what is the best solution to fix my problem.

  Thanks in advance to anyone who can help you.

  Concerning

  JP

  Unfortunately, unless you have a backup somewhere, you have to re-create the site again. Muse outputs HTML, but the actual file to use in the design process is the owner. There is no problem by downloading a new version, as all the duplicate files will be overwritten and useless files will be ignored. The only question that this causes is extra space currently on the server.

  I hope this helps

  David

  Creative muse

• A hierarchical report query SQL formatting to display the output as a tree

  4.2.1

  THM:2

  Hello world

  I have a simple request which when I run it should show in a tree like structure as seen in this link

  Hierarchical queries in Oracle SQL

  Any ideas on how I can get this output show upward in an area of report page apex? I tried to put it in a classic report, and it shows just all in one line given the length and spacing. I don't want to use the tree for this.

  Thank you!

  Ryansun-Oracle wrote:

  I have a simple request which when I run it should show in a tree like structure as seen in this link

  Hierarchical queries in Oracle SQL

  Any ideas on how I can get this output show upward in an area of report page apex? I tried to put it in a classic report, and it shows just all in one line given the length and spacing. I don't want to use the tree for this.

  I found that the standard reports and report templates are not really useful in this situation.

  According to exactly how it should be used, you might want to watch a dynamic list using one of the models of hierarchical list, but I tend to use this Tyler Muth & Rob Van Wijk. This can be used in a region in connection with a column named custom report template.

• Muse cc 2015 exit code 34

  I use Creative Cloud 2015 on a machine Windows 10.

  Several weeks ago, Muse CC stated that there is an update available.  Start the update, extracted, and 35% installation encountered an error and stopped.

  I tried restarting computer, you exit all applications completely, turn off all firewall and virus protection software before you try several attempts.  Each time it stops at 35%.

  I then tried uninstalling Muse CC through the creative cloud app, he showed progress uninstaller to 0% (as if he were starting to uninstall) but immediately disappeared and has received an "impossible to uninstall" error.

  I also tried to uninstall through the windows and immediately receive an error message.  I followed the steps, but still couldn't uninstall.  Finally, I tried using the indicated such cleaning tool, remove all products CC 2015.  I restarted and re-downloaded application CC; other applications CC and more Muse has shown as available to 'Install' but Muse always shows as having an "update" available.  Uninstall or update of the work, so that other applications were able to reinstall.  I also tried to manually remove the complete records of Muse CC 2015 after trying these steps.  It is also always a program installed by windows and CC app, still impossible to remove.

  What can I do to fix this?

  Here are the screenshots of the report and error messages shown.

  

  Please check: (Exit Code: 34 please see specific errors below for troubleshooting.) For example, ERROR: - Summary - 1 or the fatal errors, 0 FATAL error: payload "Microsoft Visual C++ 20 .

• Assets CC don't syncin not in libraries CC Muse [subject edited by Moderator]

  Hi, I'm working on a tutorial on how to build a sensitive site in Muse. I kept some assets of my cloud of Adobe and when they asked to click on libraries CC in Muse, nothing shows up in the tutorial. It is said that something going wrong initialization library of creative cloud. Any ideas?

  Hello Jorge,.

  Try the following steps:

  (1) in the Muse go to help > log out

  (2) close the Muse

  (3) close the desktop application Cloud Creative

  (4) raise the creative Cloud desktop application and connect to it

  (5) raise the Muse,

  Also ensure that the creative file Cloud syncing is ONE and then try to check for the assets.

  Kind regards

  Ankush

• Why has no expected output to the report job history?

  Hello

  I use web services BEEP to schedule reports and retrieve them (by e-mail and the history of work report in the web interface) and have had success with it. Today, when I added a new report and changed a few things, I can no longer see or retrieve the output of the report as a result of the scheduled task.

  So, to be clear, under 'output & Delivery' for a history of particular job, in the table, the output shows, the only line of the table just text in it who told you: "no available exit. My previous experience, this kind of thing always had a link to the report that was generated.

  Here are some of the remarkable things, I changed:

  -a different user to the web service BEEP ScheduleService authentication

  -another folder stores reports

  -layouts are BI Publisher templates instead of RTF models

  Scheduled reports are sent by e-mail (e-mail is the only destination I specify) with success always, so I receive the report by email very well... but I need to be able to get the release of the web interface, after it was sent by email too. And he has not shown when I view the error report work history.

  Any ideas on what Miss me which prevents the release of the report to appear in the report job history? Maybe an administration that disables the Central exit by user/folder?

  Thank you...

  
  Kevin

  It turned out that the name of the job was too long. The name of the job may include a maximum of 100 characters.

• Mobile friendly test fails because the Muse sets phone width in pixels

  Google recommends setting put phone in width as "width = device-width" rather than in pixels

  Is it possible to do it in Muse or do I need to go into the HTML and change the settings manually

  Not a problem to do this, but a nuisance and the Muse can replace when I update the page for another reason

  Thank you

  Kirby

  What you describe is not necessary to have a friendly test Google's Mobile.

  Assuming that there is a Desktop version and phone page in Muse, Muse output has not changed and no invalid code or in conflict has been added to the display of the page object > insert the HTML, the Page Propertiesarticle or via the third party widget, the page is Mobile friendly according to Google.

  If you have a page that did everything that precedes and is detected as not mobile friendly by Google, thanks for posting the URL of the page.