RAID battery showing as degraded, but is - this?
Hello everyone, I have a PowerEdge 2900 server.
BIOS version: 2.7.0
RAID driver: 2.24.0.64, A07
The RAID firmware: 6.3.3 - 0002, A-00
OpenManage: v7.4, A00 w / patch v7.4.02, A00
In the OpenManage software, under System--> Storage--> PERC 6 / I integrated--> battery, the battery shows 'Deteriorated' with the 'next time learning' showing only 0 hours.
I tried to choose 'Start Cycle to learn' in the dropdown menu, but that doesn't change anything. I also tried to change the 'Cycle to learn late' at a time, but after this time, nothing happened and that the 'learn maximum' is now showing only 0 hours as well.
Then, I opened a command prompt and run the command of omreport storage battery - output showed the same information as the OpenManage web interface. I then ran the action of omconfig buffer startlearn = = 0 = 0 command battery battery and got a successful command! message, but this does not seem to start the learning process.
In the past when this has happened, I would like to restart the server and battery then begins a learning cycle and everything would be fine. So I rebooted the server yesterday in the hope that it would enter into a learning cycle. But this time, even after rebooting, the battery is always degraded showing.
The log shows these events happening during the restart mentioned previously:
T23: EVT #53554 - T23: 141 = battery is
T23: * BATTERY CHARACTERISTIC PROPERTIES *.
T23: _________________________________________________
T23: Auto learn period: 90 days
T23: Learn next time: 0
T23: Battery ID: 39320b 78
T23: Delay in the meantime read: 167 hours from the scheduled time
T23: Scheduled next Learn the: 01-07-2000
T23: _________________________________________________
T23: * BATTERY DESIGN INFORMATION *.
T23: _____________________________________________
T23: Capacity: 1900 mAh
T23: Design tension: 3700 mV
T23: Specification Info,: 1f40
T23: Date of manufacture: 9.18 2008
T23: serial number: 2936
T23: Pack status-Config: e48c
T23: Name of the manufacturer: SMP - PA
T23: Device name: X 848389
T23: Device Chemistry: LION
T23: Design data: a0e072d7
T23: _____________________________________________
T23: * BATTERY CAPACITY INFORMATION *.
T23: _____________________________________________
T23: Parent State of Charge: 100%
T23: Absolute State of Charge: 74%
T23: Remaining capacity: 1408 mAh
T23: Full Charge capacity: 1408 mAh
T23: Vacuum time: 65535 Min
T23: Average time for vacuum: 65535 Min
T23: Average time for Full: 65535 Min
T23: Cycle Count: 38
T23: Max error: 2%
T23: _____________________________________________
T23: * BATTERY TRACK INFORMATION *.
T23: ____________________________________________________________________________
T23: Temperature: 30 C voltage: 4056 V
T23: Current: 0 my GasGaugeStat: c0
T23: GPID: a8ffb899 ChargerStatus: 1
T23: Remaining capacity: 1408 mAh full load capacity: 1408 mAh
T23: Stat Relative load: 100% FwBBUState: 1
T23: ____________________________________________________________________________
The only other battery showing later events are:
03/05/16 19:37:30: EVT #53577-05 / 03 / 16 19:37:30: 149 = battery temperature is normal
03/05/16 19:37:30: EVT #53578-05 / 03 / 16 19:37:30: 163 = current battery capacity exceeds the threshold
03/05/16 19:37:30: EVT #53579-05 / 03 / 16 19:37:30: 242 = full battery charge
03/05/16 19:38:35: EVT #53580-05 / 03 / 16 19:38:35: 155 = reprogramming of the battery in the meantime: battery is under load
This information means that RAID storage battery is still able to keep the cache in case of failure? All virtual disks are still show that the use of writing political back - don't know if it would have changed to write through if there was indeed something wrong with the battery.
Thanks for the help!
Hello.
I see the controller firmware and the BIOS is up to date and absolute State of Charge is 74%, which is good. Clear the system event logs and try to re-allocation of places the battery. See if it will re - start the learning cycle. If it does not omconfig battery action = startlearn controller = 0 = 0 battery command again.
Tags: Dell Servers
Similar Questions
-
I'm unable to install photoshop elements13 as a result of a mistake. It shows no error code but said - this installer does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.
Download the 64-bit Installer,
Downloads available:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 5.7| 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
I used Photoshop and Lightroom for years and upgraded to CC about 6 months ago. I just got a new computer and downloaded Lightroom and Photoshop CC on the new machine. In Lightroom, when I send a picture to the develop module, all I get is a blue screen, where the image should be. The navigation signs and develop panels show very well, but the image does not appear on the main screen. It appears in the browser. What's up with that?
Disable the CPU graph use in the performance of the LR preferences tab. Blue box will be gone, Image will show.
-
Satellite C660-1J3 - battery shows 0 if hooked up same fees on industry
Hello
I'm on a long trip in Austria, Europe, and my old laptop could soon die.
So I bought this toshiba satellite pro c660-1j3 (nine) and I have 2 questions:(1) after be plugged in more than an hour, the new toshiba battery always shows a load zero. How much time do I need to charge until the battery show fresh at all?
(2) I work and live in the United States. Would I be able to use the Toshiba in the USA, with an appropriate of course taking? Otherwise it will work in Europe?
I need to know, because I need a laptop that I can use in the United States and Europe and the month next in Australia, too.
> 1) once be plugged in more than an hour, the new toshiba battery always shows a load zero. How much time do I need to charge until the battery show fresh at all?
In many cases the battery would support a preload more. This means that the adapter must be connected to a longer period of time in order to start the battery charge mode.
Keep it connected for 2-4 hours(> 2) I work and live in the United States. Would I be able to use the Toshiba in the USA, with an appropriate of course taking? Otherwise it will work in Europe?
The adapter can be used all over the world, but you will need special adapter for making wall because it of different in the US, but you can still use the same adapter.
There are several listings travels All in market supply. Check some online dealers to get this piece of hardware
-
Battery plugged in, supported, but still 0%
I have Acer Iconia W700. He began to show the connected message, loads, but does not go beyond 6 percent. I tried to reinstall the ACPI drivers, etc., and it did not work. Bought a new battery and changed for her. Then, he showed the same message with 10%. I changed the power settings do not sleep at 5% and so acquitted to 0%.
Now the battery is at 0%, connected, charge. As soon as I disconect the Tablet from power cord goes to sleep.
I know - what the battery is ok, because I kept the power cord plugged in overnight, battery still showed 0%, I uninstalled the drivers for the ACPI and then disconnected the power cord and Tablet continued to work. I turned on a few long youtube video, and he played more than an hour for sure.
So battery is charge and work, but problem is elsewhere.
So far, I tried to start with the battery disconnected, uninstall ACPI drivers several times and even properly reinstalled Windows 8.1. nothing seems to work. Any ideas?.
Tried another charger, this time saw the charge rate. It is 700 000 mW (as opposed to 400 mW with old). Looks like it's the problem - old charger did not provide enough current (power) for the Tablet and the battery.
Everyone coming to this thread looking for a solution - check not only your power charger, but also good battery charge rate.
-
Changing the RAID battery on the shelves of the disc MD3200
Hello
I have 2 shelves, MD3200 of the disc. I've been advised by Dell that I need to change the RAID battery on both units.
I was wondering if someone has already done this, or are there instructions from Dell on how to on this subject.
Each drive tray has only a RAID card in each unit as it acts as one mirror of the other via the SAN software, but I am particularly concerned by knowing that the information contained in the cache has been written to the disks until the devices are turned off, while I change the battery.
Ideas or experiences that anyone has would be greatly appreciated.
KeV
Thank you Sam
New batteries so I plan a replacement, thank you very much for your answers.
Cheers mate
-
Fix ios 9.3.1 battery drain problem before I was on 8.4.1 and battery life was excellent but after updating to ios 9.3.1 autonomy got worse on my iphone 6. Apple company released please update to fix
Please you not to Apple here. This is a user forum.
Try som battery tips to save:
-
I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.
The iPod must be configured to synchronize automatically. If this is not the case, click Sync does not synchronize no matter what.
Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window. Along the left side of the window, in the sidebar, under settings, click on music. To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.
NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost. If all the songs are in your iTunes library, no problem.
At the top of the window, check the box to Sync music. This enables automatic synchronization. Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync. At the bottom, click on the apply button.
From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).
-
Media 4 GB SDHC showing not available but with 2 MB of SDCard drive works normally.
Media 4 GB SDHC showing not available but with 2 MB of SDCard reader normally works (assigned removable disk H).
Computer = Dell Dimension 5150 with XP media center OS.
2 memory cards used both with pictures taken in camera Fujifilm EXR F660-
1 = Fujifilm 4 GB SDHC class 6 - green light on the card reader lights up but does not recognize the computer card is inserted;
2 integral SD 2 GB... card reader is recognized and asigned drive H and photoes see ready for download.
The pictures on the card of 4 GB and 2 GB can be downloaded from the camera using a USB connection.
What to do to get the 4 GB SDHC to work in the drive... updates... from Dell... Microsoft Windows?
The tables/diagrams on these two sites explain the SD, SDHC & SDXC card compatibility:
https://www.sdcard.org/consumers/sdxc_capabilities/using_sdxc/
and,
http://kb.sandisk.com/app/answers/detail/a_id/2520#compatibility .
There may be problems of system files in addition to the above restrictions.
Since you have Windows XP, you can find out:
Hotfix for Windows XP that adds support for SDHC cards that have a capacity of more than 4 GB .
(since the map in your question is only 4 GB, I don't think it applies to this case, but you know)
-
The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ? Disk space is very low around 1 & half GB. Please someone help resolve this issue. I am looking for the solution, but it did not have a specific.
Thank you best regards &.
Atul Zade.
CCleaner is very useful to get rid of temporary files, you can get it here: http://www.piriform.com/ccleaner you can use it to clean your temporary files, but DO NOT use registry cleaning works, registry cleaning is mainly a useless effort that can cause more harm than good.
John
-
Windows Media Player 11 cannot show MP4 video but can hear the sound
Hi all, I prefer WMP on the other players, because he is able to play most of my MP4 without any lag. However, there are some MP4 files that do not show the Visual but audio is heard when I played against them on WMP. Interestingly, when the same MP4 files are played on other players, audio and video are very good. I take so that the files are ok, but may need to change the system or WMP.
Appreciate any advice. I'm on Windows XP and WMP ver 11.0.5721.5280. Thank you very much.
Hi lkahwai96,
Were you able to play properly mp4 files in Windows Media Player earlier?
You can follow this link & check if the problem persists:
Reference: information about the types of media files that supports Windows Media PlayerHope the helps of information.
-
file pc_healt_check.exe
I did a scan of Norton 360, and he showed that pc_health_check.exe has been infected and gave me the DELETE option. I opted to REMOVE it, being
He has been infected by a Trojan. Was it a good decision? And if it wasn't, how do I go about download (and install) a new copy of it
I'm under Windows XP Pro/32-bit 3Gigs RAM.
garystanXN
When I ran to the scanning, with the help of Norton 360, the result stated that pc_health_check, exe infected files. I don't want to delete this file. With DELETE in the box at the
right (with a menu arrow drop down).
My research indicated that the PC Health.exe is actually a virus. But (infected)
software in my system was labeled pc_health_check.exe. I tried looking for it, but can't find anything in reference to it. And, being the entire infected file, I thought to DELETE is on the option viable oly. So, I checked around a download of 'pc_health_check.exe' and re - install. I do not know if pc_health_check. exe supplied with Microsoft Windows XP, or if it was part of an update which took place...
But, if this link is for pc_health_check.exe not PC Health Check, then I'll give it a shot.
Being both are similar, but one is a virus.
Thank you
garystanXN
-
Network icon does not display connected
The network icon shows not connected, but in reality I'm connected and can browse internet.
Could grateful if someone let me know what could be the reason.
Thanks in advance
Hello world
I had the same problem and I solved it by unplugging my pc to the modem, wait about 30 seconds and reconnected. This means that if you do the same thing with your network adapter problem could be solved. Try this option, you will not lose anything
-
The battery shows empty when battery full icon
Original title: laptop battery
Hi I have installed a new laptop battery folling the calibration it according to the instructions. the battery shows empty when battery full icon
someone help please John
This means that the charging system in your laptop is broken and needs repair or replacement. Since you have replaced the battery, you know that is not the problem.
-
When you try to run GTA IV, it shows seculauncher failed to start this application
Original title: what should I do?
I downloaded GTA IV yesterday.when I click on it to run it, it shows "seculauncher failed to start this application [2000] Please suggest me what should I do to run it on windows 7 32 bit?
-C' is one of the few games using Compatibility Help settings with.
Select XP sp2 or Vista sp1 and the 'run as admin ' option should help the flow of the game.
(R / click on the LaunchGTA4.exe in the game install folder and go to Properties > compatibility.)
-This issue may also come from a corrupted C++ reinstall (from when the game reinstall C++).
If you use the floppy based of the game version you can find an installer for the C++ version uses the game
the disk- GTAIV > Redistributable > vcredist_x86.exe.
-If the installation folder using the Steam version of the game than the redistributable folder must be in the games.
-C' is just two of several possible problems with this game.
Another issue, you may face is with Games For Windows Live.
The game moved with an obsolete GFWL. Install a newer version of GFWL can also help.
-If you have problems with GFWL after installing version 3.5, you will need to download what is called a fix xliveless
(installation folder replaces the xlive.dll file in the games). If use you this fix, you can play good solo.
http://www.GTA4-mods.com/tools/xliveless-097b-F2408
For more information, visit one of the many mod GTA4 and forums sites.
-You will also need to patch the game. There are several patches, but I stopped to patch 1.4.
Site of GTA, Rockstar has only the patch 1.7 for the moment, but I don't know if this fix is cumulative.
or if you need to use some of the previous patches first.
Note this hotfix 1.7 improves the shadows so if your machine is not strong eno ugh to use the new
shadows, you need to lower the shade setting in the games settings.
https://support.RockstarGames.com/HC/en-us/sections/200034196-GTA-IV-patches-and-title-updates
Patch 1.0 - 1.4 (other GTA sites may also patch 1.5 and 1.6).
http://www.thegtaplace.com/downloads/C76-GTA-IV-patches
.
Maybe you are looking for
-
I have no FaceTime on IOS 9.3
IV tried everything to ha it but nothing has worked...
-
How to stop a software update messages without updating my software?
I continue to receive messages from software update asking me to update Firefox 30.0 for a update of security and stability. I do not wish to update anytime soon, and I'm tired of constantly getting these messages. Only two options I give myself is t
-
I'm going through Firefox to another printer and cannot figure out how.
-
HP 8200 sff: cpu core lack please help
Hi supports, My system is HP 8200 SFF i7-2600 When I check the performance of the system, I've seen only 2 core processor. I run cpuz they show only 1 core 2 son. I have upgraded the bios to the latest version and enable multiprocessor and hyperthrea
-
No key for Age of Empires 3 game
I bought Age Of Empires 3 using games for windows marketplace. I downloaded ok and you click on "install". All went well for a few minutes and then she appeared a dialogue so I could enter a 25-character activation key. I clicked on 'Show the game