Muse page guard scrolling past the footer?

Similar Questions

• IN PHOTOSHOP ELEMENTS 13 HOW CREATE A VIRGIN PAGE ON WHICH PASTE THE RESULT TO DO A PRINT SCREEN?

  IN PHOTOSHOP ELEMENTS 13 HOW CREATE A VIRGIN PAGE ON WHICH PASTE THE RESULT TO DO A PRINT SCREEN?

  The editor > file > new > Blank File

• 4.3 pages - copy and paste the links/Bookmarks.

  It's a simple question (hahahahaha) - is it possible to copy/paste a bookmark in 4.3 Pages?

  I have a 400 page document where each page has anywhere between 5 to 20 interns to other pages of the document.

  What I would do, because the pages seems to keep losing these links from time to time, is able to use the copy/paste in batch mode and paste the link as a "style." But I think there is no way to do it.

  If there is, please tell. If there is another way to do it outside of pages... Please tell!

  Thank you Ahead of Time.

  Not sure I get what you're asking because if you copy text that has a bookmark link and paste it elsewhere it retains the link.

  You can make a Style because it contains is not the formatting of data (the link).

  If you want some boilerplate text as a link pre-made, copy them and paste one already made, then change the word/s in the text and the actual link in the Hyoerlink Inspector. A little less work.

  Peter

• Page Web scrolls to the bottom of the page

  Original title: scroll, scroll, scroll and I can't make it stop!

  When I open just about anything on the internet, it starts to scroll to the bottom of the page - then stops - try to go to the top - it scrolls everything right down... If I try to go to your Favorites and open a site it will just go up and down on the Favorites and to be really quick to grab one - I have not been able to catch the correct one in a week - not fast enough - so when I opened another, it scrolls to the bottom of the page and I'm not fast enough to read the top of the page!  Help!

  Hello

  1. don't you make changes to the computer before the show?

  2. what web browser do you use?

  3. This only occurs during internet browsing using the web browser or with any other application?

  If you use Internet Explorer, please follow the steps mentioned in the link below.

  http://support.Microsoft.com/kb/936213/ro

• Why the page automatically scrolls to the cfgrid controls

  I have a page that is large enough so that it scrolls vertically. When it finishes loading, the browser scrolls automatically to the bottom of the page where a cfgrid element. It happens in IE, Chrome, and Firefox.

  I reduced the cause down to the JavaScript server ColdFusion 11 adds at the top of the page. If I disable scripts in the browser, the page does not automatically scroll down.

  Addition of window.scrollTo (0,0) at the onload of the body does not work. What JS is scrolling down occurs after the onload event. I have not tried. ready() jQuery yet; in the hope there is a fix.

  Has anyone else seen elsewhere and don't know a fix or a workaround?

  I found that the solution is to add the attribute selectOnLoad = "false" to the cfgrid tag. Its default value in CF11 is 'true '. I'm not sure CF10, but in CF9 is seems to default to 'false '.

• __When I am listening to music on the web page and scroll to the bottom of a page, the sound becomes stuttery and slows down rough down__and. This problem started two months ago. Thank you

  In addition, I noticed I have a problem with Flight Simulator Microsoft X too. I've never had a problem before. The sound is noisy, distorted and crackling. I do not add or remove anything in the last two months. It's really interesting that I have 7 games more like: IL2, star Wars and etc on my computer but there are no problem at all.

  Hello

  How can I stop my music skip or break down when I play?
  http://windowshelp.Microsoft.com/Windows/en-us/help/36db5c82-9247-4346-909a-f87743b653ae1033.mspx#EFC

  1. right click the icon of speaker near right lower clock - peripheral of reading

  Highlight speakers - properties (right same low page) - tab improvements - check Disable all sound effects
  Apply - OK

  2. check the configuration - Device Manager - sound, video and game controller

  Note name and complete model of the audio device - full decription - now double click it.
  Driver tab - notice the driver version. Then click on set to update driver (maybe nothing like MS is far
  behind the pilots of certification). Then right CLICK on the device - UNINSTALL - REBOOT - it will refresh
  the driver stack.

  Now go to system Maker and look for the updated drivers (or get the same if no new) it will be
  your rescue. Download - SAVE - go to where you put it-RIGHT click in it - RUN AS ADMIN

  Then do the same for the manufacturer of the device (like Realtek or who made the device).

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  
  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Adobe Muse Tablet page is above the footer.

  Hello

  I must be missing something simple.

  I don't have this problem with the desktop version of my muse page that the tablet version.

  As you can see with the attached images. I have created a master and set the page size to my needs.

  When you look at the layout pages, they are all long as the master. They scroll to the footer of each page.

  How can I specify to stop at the foot of the page for each page?

  Thank you very much for the help.

  The question is I put the

  Please check if the footer element is checked as a footer in the control of the strip options, more trying to remove any inserted html in master if exists and then check out.

  Thank you

  Sanjit

• How do with java: bar navigation remains visible and pops up when scrolling to the bottom of the page

  Hello

  
  I want as my default-navigation bar to jump to the top of the page when scrolling down the site - it must remain visible as on this page: www.yourpagemaker.de

  It's a German Site.

  Can someone help me with this? Where do I have to insert Java Script and how can I give this command?

  Thank you

  ELISA.

  You must change your nav to have a. affix the class with JavaScript (not Java).

  Bootstrap model 3 - attach nav after the scrolling example code

  Nancy O.

• Content runs at the foot of page

  http://HBr2.pooledesignstudio.com/index.html

  The content of this page throws himself into the footer. It is the only page on what it does.

  Do you have any suggestions? I am at a loss, and it's in the middle of the night.

  Thank you for your help.

  Kathleen

  -Change

  .to ul li {}

  float: left;

  padding-left: 25px;

  list-style: disc inside;

  height: auto;

  Width: 920px;

  }

  on this subject.

  .to ul li {}

  padding-left: 25px;

  list-style: disc inside;

  Width: 920px;

  }

  and see what happens.

• The mouse for scrolling in the secondary wheel

  Can someone tell me if there is a way to use the mouse wheel to scroll vertically in a secondary window in 7.1? (I allow the vertical scroll bar, and I focus to the true value.)   I read that it is supposed to work for listboxes, is it supposed to apply to the sub-panels as well?

  Thank you!

  Greg

  No way without writing code as far as I know. When I wanted to do something like this in LabVIEW 7.0, I had a loop that has probed the wheel using the feeding screw and used to generate a user event whenever there was a parchment. I then used that to set the FP. Original in the Subvi property to simulate a parchment. Note that you need to remove the Subvi Panel first, because you can't write the original property to a VI in a MS.

  The order was therefore-

  1. see the updates in the caller (if the user does not see the VI being deleted).
  2. remove the SP.
  3. the original value (and make sure that the user does not have to scroll past the end of the authorized zone).
  4. Insert VI SP.
  5. undefer updated.

• In the browser, the title of my page is added with the word "Test" and my URL contains additional characters.

  Hello!

  When I publish my site on my server, the pages appear fine but my page titles all have the word "Test" added to them even if I did not use this word in the titration or by mentioning my Muse pages.

  Also, the URLS of the pages equipped with additional characters after the .html. I don't know what is the cause.

  Anyone know what is happening here and how I can fix?

  Thank you!

  

  See the clearer screenshot: http://screencast.com/t/6kEZHuQGOU0V

  Hello

  Go to the "Presentation" of your 'Page Properties' section of the master page and check if it says 'Test' in the section "prefix to the Page title. Check this short video to find out how to check it: http://jingsite.businesscatalyst.com/jing/2013-10-03_0258.swf

  On the suffix in the URL of the pages, I noticed that some pages have the suffix and some of them did not. In addition, the suffix charge only once the pages are loaded (therefore is not part of the URL). It may be related to a code that you have added to pages or the "HTML for the head" section of these pages. You can check this aspect once and try to remove the codes to check if these suffix disappear.

  I hope this helps.

  See you soon

  Parikshit

• Auto calculate date added to the footer.

  Is the intention to add a date in a footer, so that the date will automatically calculate the next day? I want to show the current date when the page was printed in the foot, not only a fixed date as when the document was created, is that even possible? and would it work when printing with adobe reader?

  Jim

  The date in a footer is not dynamic. You can add a form field that is dynamic, while it is updated with the current date, whenever it is opened or printed. You can add the form field where you want, duplicate to the pages you want it to appear on (it's automatic, not manual) and add a script to the level of the document that updates the date when the form is opened or a script to the action of Document will be printed. The script could be something like:

  getField("your_date_field").value = "printed on:"+ util.printd ("mm/dd/yyyy", new Date());»

  If you have problems with this, post again.

• How to control the footer to the NOSE section?

  Hello
  
  I have a problem with the release of the RTF on preprinted layout.
  
  The situation is the following:
  I have a RTF who send invoices. Each bill has certain number of lines and the RTF deadline 6 lines per page for each invoice.
  
  Some lines of the invoice contain values of media objects (line attachments) to JDE and they are very long in size.
  
  When I preview the output, for invoices with normal lines, they appear well and the footer will appear at the end (there is a dissociation if it's breaking 6 rows on each page until you find the footer)
  
  When the Bills have the multimedia objects (<?) Generic_Text_ID22? (> in the xml file), the footer is not printed at the bottom of the page, but somwhere in the middle.
  
  Please note that I do not use the foot of Page in MS Word to this effect, but a table at the bottom of the page.
  
  My questions are:
  1. by not using not to foot of Page in MS Word, how can I control the page footer section so that it appears in a fixed position at the bottom of the page? (Regardless of the attachment lines)
  2. using MS Word footer, how can I control the page footer section so that it is printed only on the last page of the invoice (if there is more than one page) instead of repeat on each page?
  
  Thank you.

  Move the total to the total and use logical Report footer section.

• How can I pin a picture at the foot of page but keep the scrolling feature?

  Dear Forum

  I'm a fairly experienced user Muse, but I can't seem to find a way to keep one of my homepage images to place with Responsories. That means that, when you reduce the size of the browser window, the image 'floats upward' and cost overruns of the header and everything. See for yourself on: Homepage

  I need the green hills to be 'stuck' at the foot of page at all times as it they appear cut off otherwise. At the moment I pinned the image of green hills down, but it is not placed on a master page, because it is used on a single page. It works perfectly when the window more long/bigger, but when making small the image floats away and scroll incorrectly. Can someone tell me if/how I can make this image do the right thing, aka stick the foot even by reducing the size of the window?

  My current minimum height of the site is set to 600px.

  Thanks in advance!

  No, but there is no need to adjust the width. By chance I can answer my own question: I undid the function "pin" which was put down, it aligns the start of the footer and check mark the option 'footer' instead. Now the image scrolls properly and sticks the same foot when reducing the window at nothingness. Yes

  Solution: Use a page-tick (just the tick, do not insert into the master page footer)

• Adobe Muse: Why I can not get my page to scroll vertically to display the content of the page in the browser preview?

  Adobe Muse: Why I can not get my page to scroll vertically to display the content of the page in the browser preview?

  I am a novice and I do not talk about the web, so please excuse my ignorance!

  I content on my web pages in Muse design that descends below the visible window, but when I go to preview in browser, it only presents a preview which is visible in my window. Of course, I can press command + /, but I should be able to use my mouse wheel or my scroll bar to see the lowest content. I just can't understand how do! Is this something to do with the positions of Master Page header footer? They all look fine and normal and all the other sites I've done. In ADDITION, I checked non paged area (Mount table), and there is NO hidden content.

  I tried to move my content down (to 'wrong' it to enable vertical scrolling). I tried to move my foot higher than the content, but all useless page.

  Preview in browser = will just not scroll down.

  Hope it's a simple solution. Thanks in advance.

  See you soon,.

  I had the same problem and it took me almost 2 days to find a solution.

  See if that solves your problem (if all goes well it has been resolved since you posted).

  1. in the model Master, click on Page > Page Properties > metadata

  2. remove the small piece of code next to the body tag-{overflow-y: hidden}

  3. click on OK, then get an overview of your pages.