Music on AppleTV resumes when you listen to AirPlay from PC

Similar Questions

• I get an "OLE" instead of a Bitmap image when you drag an image from Firefox to CorelDraw X 4, how do I prevent this?

  I get an "OLE" instead of a Bitmap image when you drag an image from Firefox to CorelDraw X 4, how do I prevent this?

  First, drag the image on the desktop, and drag it to Corel Draw. If your dragging directly from firefox to Corel Draw, only copied link.

• iPhone 6 s is not wake up when you remove the cable from the charger.

  Hi all.

  I noticed that sometimes my iPhone didn't wake not (the lock screen display) when the charging cable is removed. the charger / sync port seem otherwise works normally.

  Is this normal?  I'm guessing that this happens because sometimes when the battery is fully charged, no power goes to the phone and if you pull the cable then, the phone can't tell you have removed the cable, but I have not seen this happen on my previous phones.

  Thank you!

  Yes, this sounds like normal behavior! On my iPhone 6, when it reached 100% of their capacity and is completely loaded, as it stops in charge, which is why when you unplug the iPhone from the charger the screen does not automatically wake up, because the charger stopped output power to the iPhone when it finished filling. I hope that answers your question!

• Network error when you try to read from C:\Windows\Installer\iTunes.msi

  Original title: error when you try to install iTunes on Windows Vista
  I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.

  I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.
  I am at a loss to understand this - I'm not much of a PC expert either.
  Any suggestions? Thank you

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.

  Method 1:
  Run the fix it and check.
  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
  Download link

  http://www.Apple.com/iTunes/download/
  
  Method 3:
  You can try the form as follows article knowledge base and check if you are able to install iTunes.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Reference link:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/
  Just reply with the results. I'd be happy to help you more

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed)

  original title: codec

  When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed) how can I fix it?

  Install the codec.  Really.

  Something like GSpot to understand that one.

• persistent "not specified" errors java script when you try to print from Web sites...

  Windows 7 64 - bit OS, HP Photosmart C4780 printer, HP Pavilion dv6 Laptop.Recently meet persistent "not specified" errors java script when you try to print from Web sites, please help.

  Try cleaning your cache. Here's a link below that will help you with this problem.
  http://goo.GL/wE6gL

• When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  Hi kevin7frg,

  You can go to "file > create > scanner > configure presets PDF»

  The dialog box that appears, you can choose 8.5 X 11 as the default width and height of PDF pages to scan.

  

  Hope that helps.

  Kind regards

  Ana Maria

• Configure the dng converter to work when you download your photos from a card to the 1 step?

  is it possible to implement the dng converter to work when you download your photos from a card to the 1 step? At the present time, I have to transfer CR2 files into a file and then convert.

  Is there a way to achieve downloading?

  Bridge > file > get photos from camera

  Check the convert to DNG

  

  I guess it would work exactly the same from a card reader to plug the camera into a USB port.

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• No sound when you listen to XM through Windows Sidebar

  My Dell laptop has sound and works very well, HOWEVER, I am not able to hear any music when I'm listening to XM via Windows Sidebar. I know it is connected, but not all the sounds will play.

  Hi Srhtx,

  • You are able to get the sound when you use other gadgets in the sidebar?
  • Did you get the sound earlier on this computer on XM radio on the sidebar?

  I suggest to access XM Radio using Windows Media Player on your computer and check if you can hear the sound. To play in Windows Media player follow the steps below:

  a. open 'Windows Media Player'
  b. Select 'display '.
  c. Select "online stores".
  d. Select 'XM Satellite Radio' in the list of online stores and continue by entering your user name and password.

  If you are able to hear sound in Windows Media Player, you can contact support XM radio to check if you need to change the settings.

  Link to contact XM radio support:http://www.xmradio.com/help/index.xmc

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player - error C00D1198 when you listen to files online

  C00D1198

  I had the same problem over and over again with my Windows Media Player. He is not consistent, but it happens several times a day. When you try to listen to music on the net, I am having problems and receive an error code that reads C00D1198. I don't know what it means, and I would like to know how to avoid ever see that again. In addition, there were moments where I got Windows Media Player successfully, but after a while, the music would stop playing on its own.

  Hi Dazzlicious,

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  1. The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the Open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.
  2. The server is not available (for example, the server is busy or not online). Try again later.
  3. For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

  Follow the steps in the article below to check your proxy server settings
  http://Windows.Microsoft.com/en-us/Windows7/C00D1198

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I stop and then resume when you use the magnetic Lasso tool?

  CS4 on Mac. I have some fairly complicated selections to make and the magnetic lasso tool seems a good choice. However: How can I stop and then resume when in use? For example, I would like to zoom, start by dragging along the edge, then stop, move the image to a different area of it is in the middle of my screen, then pick up again where I left.

  Hi MarieMeyer,

  You can press the SPACEBAR shortcut to activate the hand tool temporarily once you are finished with the selection on a part of the image.

  Then, move the image with the key space key and let it continue with the selection by using the magnetic lasso tool.

  You can use the SHIFT key to add to the selection by using the magnetic lasso tool.

  Kind regards

  Claes

• 12.5.1 iTunes crashes when you play on AirPlay

  Hi all...

  Since the 12.5.1, update any when I play music over the airtime to one of my devices AirPlay after ten minutes or so, iTunes hangs on my iMac. I have had three accidents on three times when I played the music in this way, since the update.

  Of course, I could use some advice on how to approach this. It is even possible to go back to my old iTunes?

  Furthermore, I played music over airtime all the time before the update with iTunes ever crashing. In addition, a few anecdotes:

  • iMac is connected to an Airport Extreme via Ethernet
  • Airport Extreme is plugged into an Ethernet hub
  • The Airplay device is a Pioneer receiver, connected on the same hub Ethernet (two different Pioneer receivers in two different places)

  Here is a (partial) example error log:

  Process: iTunes [39786]

  Path: /Applications/iTunes.app/Contents/MacOS/iTunes

  ID: com.apple.iTunes

  Version: 12.5.1 (12.5.1)

  Generation information: iTunes-1200012005001021 ~ 2

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Manager: iTunes [39786]

  User ID: 502

  Date/time: 2016-10-03 10:14:49.890-0700

  OS version: Mac OS X 10.10.5 (14F1909)

  Report Version: 11

  Anonymous UUID: 35DF2678-532B-1D2F-1491-16D61A122FC0

  Sleep/wake UUID: 324107AB-D38A-4827-949C-D31B2B520523

  Time since started awake: 5600000 seconds

  Wake time: 580000 seconds

  Crashed thread: queue main iTunes shipping 0: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Request for clarification:

  Abort() called

  Error object 0x7fa85be0de00: pointer being freed was not assigned.

  Crashed thread 0: queue main iTunes shipping: com.apple.main - wire

  Hello Brent,.

  Thank you for your participation in the communities of Support from Apple.

  I see that iTunes is leaving after an update when you play songs to AirPlay devices. Let's try some troubleshooting steps to help isolate and resolve the cause of the error.

  If you haven't done so already, don't forget to restart your network devices and receivers of the AirPlay. For AirPort Extreme, I suggest a "soft reset" for now as mentioned in resetting an airport station base FAQ.

  Then try the AirPlay test in safe mode and a new account on your Mac user. The following steps can help to eliminate software conflicts in your user account and can give us an indication of the additional troubleshooting steps to try then.

  You can use this Support article as a guide to complete both of these steps-How to test one question in another user on your Mac account.

  When it comes to tests in a new user, you need to import a few songs in iTunes for testing library. Here are some links to help with the signing in music Apple or download past purchases:
  

  Download your latest purchases

  Turn on iCloud music library

  Best regards.

• Error in name of user/password incorrect when you copy files or from folders

  Our company uses a Mac Mini (with OS X Yosemite) and application server to share our internal files. We've had this set-up for year now with everything works well. As of late, however, we are more able to copy files or folders which are in all shared folders. Basically, when we try to copy any file or folder that is located in one of our share points, we get the error "Unable to connect to the server because the name or password is incorrect". This error occurs for each user account, including my own, that has been specified as an administrator account. We are able to add files and folders (e.g.: copy from our local computers to folders) as well as rename the files and folders that are located in shared folders. We can also create files without any errors, so I'm fairly certain it's not a permissions issue. In addition, I tried deleting completely all files and recreate their but not always the same error. I also tried to create new user accounts (accounts directory Local as the Local network directory) and the problem persists when you are connected to the server using these new accounts. I just don't know what else to do as this seems to be a software problem. Any ideas?

  Thank you

  OK, a little update. We have a mac (iMac) client computer that still works under OS X Yosemite. The user on this computer is able to copy files and folders without receiving this error. This same user has also a Macbook that runs El Capitan. Using the same network login for access to the server of their Macbook results in the same error message. All users who receive this error also run El Capitan on their Macs. With this latest development, I'm pretty much able to conclude that this error is the result of El Captain customers access to a shared folder on a server of Yosemite. What is curious is that I did not always have this error since the upgrade to El Capitan. I am sure that this problem came only in the last month or so leading me to conclude that either update to El Capitan (on the computers of our customers) or an update to Yosemite or the Server app) on the computer server has created this error. The issue is upgrading of the computer server to El Capitan solve this problem or am I in for a whole new can or worms?