Must configure airprint again after a new router

Similar Questions

• my printer does not print after a new router, I configured it but still does not

  I have a new router and configured it for my printer a Kodak ESP5250, I did all the things the computer told me to to try to resolve the problem, restart spooler ect, but it still won't print and I'm on my work please help. Thank you

  Thank you very much for your help, I was told by a friend to the support ring at Kodak who I did it remotely, they got into my computer and solved the problem, still not sure it was good. I was impressed by the response here and it was fixed in five minutes. So if anyone has a Kodak printer that does not print from the computer, but the impressions of the printer, this is the road to go down. Thanks again for your help.

• Wireless configuration of HP C4780 with new router and Mac (wireless network not found)

  About 10 months ago, I bought a new router. I already had several problems connecting my HP C4780 to my old router, and after setting up the new router, I was totally unable to connect the printer wireless to my router.

  I have reset the system to the printer on my Mac, I have reset the settings on my printer wireless, I downloaded the latest HP software, I've uninstalled and reinstalled the HP software several times and I have had no success. When running through the Setup Wizard, I was able to select the printer and method (wireless network set up by USB) before plugging the USB key. After that, the Setup Wizard says "Device not connected" (DUH!) and the screen select network said simply "no discovery goes Wi - Fi network." I ran the print to the printer from the Network Configuration, and he identified 15 networks (mine included). So, it seems that the Wi - Fi receiver on the printer still works...

  Any suggestions?

  P.S. This printer has been nothing trouble since I got it, and I wouldn't recommend it to ANYONE (I like actually...).

  After attempting to run the installer on my boot camp Windows 7 Ultimate version, I fell at last on an obscure statement in the configuration of the PC software for the c4780. It says to connect the computer to the router using the router WPS button.

  I have reset the configuration on the printer and turned off wireless the wireless, then I pushed the the router WPS button until the blue WiFi light on the c4780 lit. THIS SEEMED to BE THE KEY STEPS to CONNECT THE c4780 to MY ROUTER.

  After that, the configuration and setting up the printer on my Mac using the system of preferences was a piece of cake. Functions of the printer and the scanner work with Mac drivers.

  Problem solved... For now... This printer is so buggy, I have no doubt I'll have similar problems in the future.

• Time Capsule missing after installing new router

  I recently installed a new wifi router for my home network. Previously, I used only my time capsule to back up data and intend to continue to use it for backups. However, with my new router, I can't find how to access the time capsule to keep backups. I have time capsule directly connected to the router via ethernet and it will still not appear in AirPort Utility or enable Time Machine to find.

  Any suggestions?

  Everything has changed.

  With a new router, you have a 'new' network... and the time Capsule is to remember the parameters which it was equipped to work in your 'old' network The time Capsule is lost and he can't find his way.

  Reset to return to the default settings Time Capsule

  Connect it to the router

  Set up the time again to work with the "new" network Capsule

• Printer is no longer detected after installed new router. Tried everything. Help, please!

  I have a Photosmart 2575 printer which has worked well for several years.  It has a wired connection to my router.

  Recently, I installed a new router (sky fiber hub) and now the HP software (and any other software printer/scanner) are unable to detect the printer on my network.  It's strange, because my desktop (wired network connection) and my laptop (wireless network connection) can see the printer and I can install it using the standard features of windows 7.  I can also browse the built-in web server, so I know for sure that my printer is on my network and accessible.

  But despite numerous attempts to make the software HP Solution Center to work I am unable to print/scanning etc from this software.  I tried several different 'fixes' including full level 4 uninstall before reinstalling the software, reset the network settings on the printer, the printer remove everything on the network etc etc but nothing worked.

  I tried to use the printing software HP and doctor Scan, but this does not help.

  I'm totally perplexed by this apparent lack of connectivity.

  Can anyone help, please PLEASE!

  Alan Phillips

  Success in the end, but only after many hours of trawling through forums of HP and Microsoft, and many attempts to make the connection!

  But here's a summary of what I did for someone else with this question: -.

  1. I carefully removed all traces of what to do with my PC HP and unplugged the router of network printer.

  This requires many "level 4" uninstall to clear all installed previous falied and delete everything in the temporary file later: -.

  1. press the Windows key and the letter R
  2. tap folder
  3. press enter or click OK
  4. open the file 7z
  5 open the util folder
  6 open the folder of the ccc
  7. double-click on the Uninstall_L4

  2 using the control Panel_Programs and features, uninstall anything left that could be associated with HP

  3. perform a disk cleanup using Start_Accessories_System Tools_Disk cleaning and repeat this for system files

  4 Follwing the procedure found on the following link to check that the print queue is working, and that all the dependencies are "launched": -.

  Link to the message

  In this thread, there is a sequel of the procedure which requires opening a command prompt in administrator mode and enters the command line carefully

  dependent on the spooler of sc config = RPCSS
  (Note the space after the = not before)

  5 run msconfig.exe on the tab general, click on "selective startup", uncheck "Load Startup items", then on the services tab, hide all microsoft services and unselect all items [remember then to revive and return to a normal startup!]

  6. restart the PC

  7 disable Firewall [remember to activate later]

  8. start Internet Explorer (I had previously used Chrome)

  9 download AIO software from the HP Web site

  10. run and connect to the printer when you are asked (make a note of the IP address of the printer)

  11. the network printer was not found immediately, to do this, click Advanced and enter the IP address of the printer

  12 success - the printer was eventually detected and installed correctly.

• Recently, to make 'No Signal' message, after the new router

  I have a new Verizon Fios router, and since then my Apple TV does not work.  The TV keeps giving me the message "No Signal".  This could be a coincidence, and I really need a new HDMI cable?

  It is unlikely to be something to do with the router, but exactly the type of question that you get with a poor HDMI cable.

• HP Officejet 4500 all-in-one: do not print after a new router has been installed

  I recently got a router update Verizon Wireless. I updated the password key on my devices and also assured that the printer is visible from my PC. However since the upgrade, I can't anything to print.

  I tried whole process of turning off the printer and the router and the password rentering. The PC recogize the printer but there may some disconnect somewhere that I can't make impression - help...

  Thank you!

  Replacement/change your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Xbox 360 Media Center Extender loses the connection to the media center to Windows 7 after change of router

  I have a Windows 7 Media Center box, and an Xbox 360 that I use as an Extender.  The two connections to the same wired router.  Everything worked fine until I went on my old router (failed) and put in a WNDR4300.   After the new router has been installed, I didn't have the Extender work then, deleted from the media Center and re - he added.  It worked but after I shut off/started the xbox, no link.  It is repetitive: I can make a new connection, but then it didn't reconnect after reboot of the xbox.

  Check/change:

  -J' changed to a static IP xbox

  -There is no part 3 a / v or a firewall on the support center

  -L' on the media center network adapter is 'home '.

  -The network card on the media center * fact * show the xbox 360

  -The event log after the xbox is restarted shows:

  event ID 538: installation of media center extender does not like the Extender has been detected on the network, but for the Extender upnp search failed (timed out after 20000ms)

  -How long before it, I have found that the service IS running upnp device host (and set to auto)

  -J' checked 4300 router wndr and UPnP is enabled (advertising set to 30 minutes)

  question, any ideas what configuration will solve this problem?

  Hello

  I suggest to look and ask here:

  https://support.Xbox.com/en-us/browse/Xbox-360?XR=shellnav

  http://forums.Xbox.com/

  http://www.thegreenbutton.TV/forums/

  See you soon,.

  J

• new router = dns error after running over and over again, Network Diagnostics only a page appears, and then stops. tried to reset IE8 on XP tablet

  changed «sharing data...» ', looked already several answers... all other laptops (4) adapted for the new router & modem with no problems...

  When you run the network diagnostics I can connect to the internet once, but trying to follow the link or open the second window provides DNS error and kill the connection.
  last error now from network diagnostics is error 0x5b4 to query the server DNS 192.168.1.1; DNS not found, not a home user scenario...
  any other idea?

  Hello

  You did changes to the computer before the show?

  Please follow the steps mentioned in the link below.

  http://support.Microsoft.com/kb/314095

• Photosmart 6520 e all-in-one: airprint not working after change of router

  After an upgrade of the router, my connections are all very well with the wireless and printing succeddful to see the wireless configuration. Computer (acer) laptop is fine, but now I can't print from my mac airbook or the ipad or the iphone. 'no airprinters found' I noticed that the printer's Ip address is 192.168.1.5 and the gateway is 192.168.1.1.  I can see the printer option in the settings / wifi on the ipad and it IP poster 192.168.223.100. ???

  so far, tried the usual things;

  1 router reboot

  2 restart apple devices

  3 settings factory restore on the printer and reconfigurung using WPS successfully

  4 turn off, unplug and restart the printer.

  No joy. ePrint thanks to my address hpemail works but nothing else.

  Anyone got any bright ideas?

  I've sorted my own problem and I put this here for everyone in a similar situation with airprint questions. The problem for me was my new router from talk talk upgraded. Everything seems fine. Configures and implements and should work but if you have 2 routers following it will not airprint to devices apple;

  D - Link DSL 3680 (can restart as ready upgrade)

  DSL 3780 (MINE!) "Firmware update later this year.

  until such time as in this case, you could avoid 2 daus trying to restart, print, check the addresses Ip, etc like I did...

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Deskjet 3510: Printer not connected to the Internet after new router purchase.

  After buying a new router, printer does not work. Is not connected to the Internet. I followed the instructions on how to connect but nothing I did helped. Wireless test results show the printer are currently configured with an automatic IP address, I don't know why or how this happened. Also shows that wireless and wireless is working and success to the configuration of the printer, just not connected to the Internet.

  Yes you will need a printer USB cable like this.

  http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?ie=UTF8&QID=1458167924&SR=8-1&keywords=printer+USB

• Installed new router Netgear R6100 not configured now no wifi dell studio 1745

  I bought a new router and configured the wireless via my wifi. Everything worked well. Back on my laptop and nothing. I checked bios, enabled via the Device Manager and reviewed the mobility, but it is greyed out and won't let me turn it on. I have updated drivers by connecting directly and still no wifi. I appreciate all help you and I'm ready to do its utmost to return wireless. I also did a system restore before without success until I updated the driver. Thanks for any help possible.

  I found this driver download Dell Quickset and it let me activate my wifi. Thanks for your advice if this happens again I'll do as you say.

• Apple 3rd generation does not after having installed new router put I in the codes manually

  Hi recently had outages etc and a new installed router in wifi but now my apple tv 3 does not work but only home screen sharing/settings see I am signed the Mac for home sharing.  When I go into network settings I see the configuration is automatic, but the router shows that n/a, does that mean that I have to put codes?

  TIA

  Wendy

  You have connected the Apple TV for the new router?  You will need to make sure that the Apple TV is connected to the wifi network, which broadcasts the new router...

  Get help with Wi - Fi on your Apple TV networks - Apple Support

• got a new router how to connect my old again router Extender?

  My ISP has given me a new router. How can I connect my EX2700 existing to the new router extender? I tried just acting as if there had been no previous router, but it did not work.

  Resetting the Extender.

  Then Configure the extension once more.