Similar Questions

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• Firefox does not connect to the internet after you try all the troubleshooting, reinstalling, check my firewall, etc. Help!

  Okay, I re-installed Firefox but it still cannot connect to the internet. The original question disabled my Norton antivirus, and I am currently using Windows defender. I have Mozilla removed from the allow list as suggested in the troubleshooting and then re - he added, but which did not help, any suggestions? I am running a full scan now, it has been 2.5 hours now and still running. I can't understand what prevents FF to access the internet, and so far none of the suggestions have worked. I am running windows 8. I try to install troubleshooting information, but it ask again me what to open the xpi file and I have no idea. Hell, it's so boring. OK, got the added manually troubleshooting info. Hope that helps someone help me.

  Thanks, that no longer works. I had finally realized with the help of an agent co. My norton antivirus was blocking the upgrade, even if the upgrade it was invalid. Weird, but once we have updated and downloaded the new norton stuff has worked. Thank you all for the suggestions.

• BROWSER DOES NOT CONNECT TO THE INTERNET AFTER DOWNLOADING THE REALTEK HD AUDIO DRIVER

  PC: Hewlett-Packard Pavilion Slimline model: s3307C

  Operating system: 32-bit Vista Edition Home Premium

  I wanted to update my sound driver and downloaded the Realtek HD Audio 32 bits for Vista2013 that I saw that I already had the 2009 version.  the one I downloaded is the version of the file R-271 2.11.15.0

  Can no longer use my browsers, they keep loading and after a certain number minutes, (20) and then I get a message saying that Web pages are not displayed and the option to wait or kill the pages, it's on the Chrome browser.  Internet Explorer behaves in a similar way.  My computer says I am connected to the internet.

  I called my internet provider and they had me reset the modem to factory reset, no results.

  They asked me to ping google.com, computer failed.

  I tried two restores system without result, he will not restore

  I tried to uninstall this 'thing', and the computer re-installed.

  Running out of options here, can someone please help me? or if my computer is ruined?

  Thank God I have a second, a laptop computer to ask for help on.

  Welcome to the forum.

  I don't see why the browsers do not work due to a change to the Audio.  I can imagine that the Audio does not, but I do not see the link between an update to the Audio and network failure.

  I do not recognize the patch / update installed.

  • Do you have the new driver Audio HP's?  If Yes: so, what's the name of the sp package *?

  The following come to mind...

  ======================================================================================

  System restore

  • "Back in time" to a point where everything worked.

  Using Microsoft System Restore - Vista

  NOTE:

  • Restaurant sometimes works best if you first remove the system in Safe Mode.
  • If restore works, but the system will not back-track, there may be something weird going or system has not created a Point of restoration for the necessary period of time.

  ======================================================================================

  Recovery Manager - Vista

   

  • Restore and reinstall the original comes from driver tjhat on operating system

  HP and Compaq Desktop PCs - performing a software Application or recovery Driver (Windows Vista)

  ======================================================================================

  Install the driver from the website of your computer

   

  The Audio driver for your Vista system is presented as an 'Update' instead of a 'pilot', or 'original '.  You might be able to use it as a stand-alone facility - which means that the wording of the document is misleading - or the packaging may actually be dependent on the original driver that is not available on the website for Vista 32 bit OS.

  HP Pavilion Slimline s3307c Desktop PC drivers & downloads - Audio

  NOTES

  • To REMOVE the driver in Device Manager, you must uninstall, AND check the box to remove the driver. -Restart the system to complete the uninstallation.
  • This opens the system up to the old driver installation / original / correct, but this means that you must have something available to replace the removed driver.
  • If you use the Recovery Manager, you may not be everything first remove the existing driver - you can try just saying the system to restore the original and see if it works.  Restart the computer after installation.

  =====================================================================================

  The driver can be very well and it's the cache driver and instructions in memory which is trashed.  Power reset drain all the old instructions and forces the system to go on the drive to read the drivers and software on the computer.

  Resetting the forced feeding

  Execution of a coercive power reset or forced Reset

  Power reset cannot tell the difference between drivers - it does not analyze a driver before applying.  It assumes that all the drivers on your computer belong there.

  EXAMPLE:

  • If the driver on the disk is the wrong driver before rebooting, it's always the wrong driver after the reset.
  • If the INSTRUCTIONS of the driver are tangled, messed up, or there are missing pieces of these instructions, the reset can solve the problem.

   

  Why a power reset works to solve some problems:

  The power reset does not install anything on your computer, it does not remove the programs on your computer and Reset does not change the settings on your computer.  Your data and programs remain as they were before the reset has been applied.  Reset runs old program of the memory instructions and forces the computer go to disk operating system for new instructions.

  Why a power reset does not work:

  If the problem is more than a simple tangle, if 'good job' on the computer is not good enough - in other words, you need an update, a new driver, or there is a problem that can not be "unraveled", then reset won't work.

  If there is a hardware problem power reset will not work.

  ===============================================================================

• Can not connect to the internet via my router

  I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.)

  Is there something else in my network installation of Windows 7 that needs to reconfigure?

  Hi Viking_Dan,

  It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however.

  Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is:

  Ping xxx.xxx.xxx.xxx

  (where the x's represent the IP address)

  You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match.

  If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8

  Let me know what happens

• computer does not connect to the internet after reinstalling XP SP2 wit

  After that the computer we reinstalled windows XP with SP2.  The operating system loaded fine, but don't can't get the computer to connect to the internet.  Went through all the steps suggested even check the Service Manager to ensure that the appropriate services are started.  Any help would be appreciated.

  Hi DamonBrigham,
   
  -What exactly happens when you connect to the Internet? You get an error message or error code? If Yes, indicate the same.
   
  -Do you have a cable or a wireless connection?
   
  If this is a wired connection, try starting mode safe mode with network and check if you can connect to the Internet successfully.
   

  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  See this link for instructions on the boot safe mode with networking:

  A description of the options to start in Windows XP Mode

• I need help my pc does not connect to the internet after installing updates

  My internet does not work after you install the updates so I uninstall and they work fine.

  It happens all the time as I paid for the program and downloaded on my PC and they need to access the internet at work and when I click on it it say failed to connect or unable to connect to what happens with that?

  I downloaded mozilla fire fox and that no longer works and the same for IE8 after instalation my internet does not work why?

  I need serious help to what I at least need these programs, I bought to work.

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  OR

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Post back with update KB number, you are having problems with.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 does not connect to the internet after the clean install

  I did a clean install on my Windows 7 computer, but means doing so my computer not connect to internet more that connection drivers were lost. I'm going back between Web sites up-to-date, but without success. I someone could direct me to the link with the appropriate driver if I give you my ibs material?

  If you purchased your computer with Windows 7 preinstalled, the computer or the manufacturer of the laptop computer uses drivers for it.

  If you have installed Windows 7, you can always go and find Windows 7 drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  Examples.

  Dell drivers:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  HP drivers:

  http://WWW8.HP.com/us/en/drivers.html

  Drivers Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  See you soon

• IE 8 does not connect to the internet after the installation of Cumalative update of security for Internet Explorer 8 for Windows Vista (K8974455)

  Internet Explorer cannot display this webpage
  	What you can try:

  Hello

  Perform a restore of the system to an earlier point in time before this problem started. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  5. the computer restarts and system files and settings are back to the State they were in when the restore point was created.

  The geek

• Unable to connect to the internet after installing Windows 8 Pro

  I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. what web browser do you use?

  3. don't you try to connect to a wired connection?

  4. What is the Dell laptop model number?

  Please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Start the computer in safe mode with network and check if the problem persists by following the link below.

  Start settings for Windows (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Follow the steps in the link below.

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

  Follow the steps described in the links below.

   

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  A Wi - Fi & networking:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1

   

  For reference:

   

  Connect to the Internet:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• not connected to the internet deskjet 3520

  First day instaled deskjet 3520 printer all-in-one on the internet ok

  Two days does not connect to the internet.

  My internet connection is ok for my laptop and mobile

  Hi rubyjim,

  Thank you for the additional information.  I was very surprised to see the number of disconnects the printer has had in the last 24 hours.

  According to the information provided, I'm surmising that you stopped in step: evaluate the wireless network Test page according to the wireless network Test page you are correctly connected to your network.  In this step you ask to change the change to your wireless router, you please begin at this stage and test wireless printing?    If you are unable to print please continue with the remaining steps.  For ease of reference, I have included a list of the document printer does not maintain the wireless connection again.

• When you try to print photos or turn them into a book, I constantly get the message that I 'am not connected to the internet"when I am clearly, via wifi.

  PHOTOS, Version 1.3 often gives me an error message "you are not connected to the internet" when I am clearly, via wifi.  This happens when I try to print a photo or to place pictures in a book.  (It also happens when I ask to export a photo on the desk, but then it is exported, despite the error message.) In the preferences of pictures, I chose "download the originals of this Mac", but the problem seems to be when the photo of the cloud recovery.  My operating system is up-to-date: 10.11.3.  My desktop Mac is mid-2010.  I take quite a few photos, and maybe download them to the cloud and then download them to my computer takes a long time.  That's the only explanation I can find.

  You have activated the iCloud photo library and selected the option to optimize the photos in your local library?

  If Yes, then the Photos is a download full version size for use in the book, print, or share via email, etc.

  

• printer does not work it tells me not connected to the internet

  my printer just stopped working.it says it is not connected to the internet.it was before.

  Exact wording of this message?

• MY HP PHOTOSMART 7520E PRINTER IS NOT CONNECTED TO THE INTERNET

  I have a wireless printer HP Photosmart 7520e and following a power failure, I lost my Internet connection.  The printer works fine without any other problems, but for some reason any that it does not connect to the Internet. Appears on the printer 'wireless Direct' but it is not connected to the Internet.

  Hi filgrastin,

  Thank you for your answer! I have a few questions for you:

  • You are using a Mac or Windows operating system? What is the version number? To find the exact version, visit this link. Whatsmyos.
  • How far is the printer from the router?
  • What falls down on the Test report wireless?

  Here's how to print a Test report Wireless:

  • Load the white plain US letter or A4 paper in the tray, if it is not already.
  • On the Control Panel, press the Setup icon, and then tap on wireless. Wireless menu.
  • Press the Test report print wireless. The printer prints the test page.

  If you are running Windows, please try our HP print and Scan Doctorand let me know what happens.

  We hope to hear from you. and have a nice day!