Equium A60-173 - after update BIOS not boot

Similar Questions

• Re: NB - after update BIOS not boot USB

  Given that I've updated the BIOS of 1.5 to 1.9 linux on USB does not start, request a drive after selecting the USB to boot.

  (1) if anyone can confirm this?
  (2) where can I download original order of 1.5 in BIOS downgrade

  Hey,.

  Before you start a lengthy discussion: what NB you have exactly? Toshiba has released different models of NB and it would therefore be important to know which model you have.

  And why you have updated the BIOS?

• While I got error 164 - my Equium M50 update BIOS not boot

  I installed this update of the BIOS for my Equium M50-164 and during the installiong I got and error laptops - 164 and now whenever I try to start it I just get a black screen, the lights say turned, the hard drive is on etc. but the screen is all black and I tried an external monitor but that did not work either and I also tried toshiba recovery CD and has no worked.

  I even tried the drive of crisis recovery method, but actually need someone to help me and give me a return upwards of bios work like toshiba will not.

  I'm sorry to hear that.
  The fact is that something went wrong with the BIOS update and now the BIOS is simply damaged.
  There is no way to start your laptop with BIOS corrupted.

  The best thing you can do is to contact the nearest Toshiba authorized maintainer. they can help you with it.

• Equium A210-1AS - after update BIOS screen no longer works

  I tried to find the same problem but impossible.

  I had to reinstall Windows Vista after mistakes with programs (recovery was useless so install fress was necessary) and everything worked fine. I downloaded all the drivers and updates section of drivers Toshiba, I installed the ATI graphics driver, then update the BIOS.
  While the closed laptop, now when I turn it on, the fan on the works of graphics card, battery, power and load turns on but the screen remains off (not illuminated). I tried an external monitor and the same problem again. As the screen worked fine until the update im guessing its something that the BIOS has done, or the graphics update.

  TOSHIBA SATELLITE A210 - 1AS
  PSAFJE
  -AMD Turion 64 X 2 Dual-Core Mobile Technology TL-58-
  Genuine Windows® Vista® Home Premium edition-
  DVD Super Multi (Double Layer) drive-
  2 048 (1 024 + 1 024) MB of RAM DDR2 (667 MHz)-
  15.4 "TFT display 1280 x 800

  Thanks to all who can help.

  To me, it sounds like the update of the BIOS's not on your laptop. If the BIOS update fails more often than computer start doesn t more you can see anything on the screen but you can hear the fan, etc.

  In any case, you can try this workaround: remove the battery and the AC adapter. Wait an hour and then reconnect the two devices. Now try to start Notepad and hope this works ;)

  If it doesn't work, you should contact the nearest authorized service provider. Technicians can try to reflash the ROM module

  Good luck!

• Equium A60-173 does not start after the BIOS update

  Hello people,

  I downloaded a BIOS updated toshiba for my Equium A60 - 173 and while it was loading on, restarted my laptop. Now, whenever I turn it on, the power light comes on for a few seconds, there is nothing on the screen and then it turns off again. I'm really worried, I've done some serious damage. I know a bit of the BIOS, but not that much. I need help, this is how I put a BIOS on here if I can't turn it on and the current one is damaged. Is it possible to get the loaded BIOS on without being able to turn it on?

  Any help will be greatly appreciated! Thanks in advance.

  Concerning
  James

  You could try to remove the battery, wait 2 minutes and then go back, however he only its not very likely that your BIOS update was not successful. If I remember correctly when I flashed my A60-181 this process takes about 10 minutes. If your laptop prematurely reloaded until the program has finished, I'm afraid you have no choice but to send new to Toshiba to be fixed.

  Richard S.

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• Equium A60-173 PSA67E does not start

  I don't have a model Equium: Equium A60-173 (PSA67E-00700C8J) that will not start.

  It tries to start hard drive turns, the fan starts, the dvd drive light flashes, the hard disk light flashes and then he died.

  Battery life is very good, charger/power supply is fine.
  Lights on the front shows the unit is on and the battery is being charged, they all light green.

  I removed everything, left power and removed the battery for an hour, but it still will power not on.

  Any ideas?

  It looks like a faulty motherboard, but it is not easy to say.

  You have already removed the battery and the AC adapter and waited upward at the time, so you have to go to an ASP and ask a technician for help. They can check your laptop and exchanging parts.

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

  Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

  Laptop computer has restarted:

  1 Fireed power led,

  2 Powered hard drive for 2 seconds to turn it off.

  3. stops...

  No Dell Logo, no beeps, can't go in the Bios.

  Test LCD works OK.

  Remove the module of Ram, power on and listen to beep

  Pressing the END key and power for laptop has no effect.

  Any idea?

  Yes. I did it.

  Laptop have bios Phoenix.

  Phoenix Bios have restored the USB Flash procedure.

  This procedure to restore the BIOS:

  1. download USB flash less than 4 GB.

  2 format in FAT.

  3. get your flash update of the Dell store - xxxx.exe

  4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

  5 extracted copy of Bios.cap for the flash player.

  6. turn off the power to the laptop.

  Next 7,8 step may not be necessary but I did it.

  7 disconnected all perihpericals with battery and charger.

  8 disconnect the HARD drive

  9. connect the USB on the laptop on the right side.

  10 press and hold the END

  11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

  12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

  13. After finishing laptop restarts and worked well.

• Must disable Touchpad tapping Equium A60-173

  OK, so my father, I bought a laptop a few years and now it has forwarded to me. I am wanting to turn off tapping it on the button, but I can't find an option to do so.
  I installed a new copy of Windows XP Pro, so there may be some missing drivers that come on the recovery CD.
  I tried to find all the drivers, but I can't find my notebook anywhere. I ran the Toshiba program that is supposed to detect what laptop you have, but it came with nothing when I ran it and I also searched in the drivers on the Toshiba site section, but my laptop does not even appear in the choice of laptops.

  It is a Toshiba Equium and on the back, he said Equium A60-173 and the model number is PSA67E-00700C8J.

  So, if someone can tell me please how to disable the tapping on the touch pad that would be great. I can't disable the touchpad entirely because of course I want to control the mouse pointer.

  I saw a post that said to press Fn and F9, but has nothing, probably because I don't have the correct drivers installed.

  Any help would be great.

  Hey Buddy,

  The touchpad tapping function can be disabled in the options of the touchpad driver. FN + F9 key combination to disable the touchpad together so it s another function.

  The tapping function can be disabled if the touchpad drivers are installed. If you install Windows on a normal disc from Microsoft no drivers are installed and everything you need to install yourself. If you are using the Toshiba recovery that all disk drivers and tools are installed automatically because it contains a picture of the factory settings. Recovery disk is more comfortable.

  All the drivers and tools you need now can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Equium > Equium A60 > PSA67E

  As you can see you only need to search the Archives to find the drivers ;)

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• Need new battery for Equium A60-173

  Hey guys, I am looking for a battery for my laptop Equium A60-173, but I can only find them for the satellite series even if they have the same battery product number.
  Then would it still be ok for prchase bettery satellite for her?

  Thank you.

  The names of the different specifications are a bit confusing.
  The Satellite A60 Equium A60 and portable very similar. To my knowledge, the satellite was delivered in the UK.

  I studied a little this framework seems to be compatible PA3382U-1BAS 6450 mAh

• Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  10 Windows Internet Explorer with the Acrobat Reader plugin is available.

• Equium A60-157, problem after update BIOS 1.90

  Hi all!

  I've had my Toshiba Equium A60-157 for two months. I've updated the my bios twice. First of 1.70 to 1.8 C and from 1.8 to the current 1.90 (common at the time I made this post).

  I noticed that as soon as I used my recovery DVDs to restore the laptop to the default constructor, I had a problem with the main user account that is normally created after the completion of the recovery strategy.

  Whenever Windows would open a session after the recovery account generated, a popup would display a message similar to the following:

  "Windows can not load the profile and connects you with a temporary profile." No changes will be saved. "

  He also said that this problem was maybe due to incorrect permissions, or something like that. The pop-up window also contained a 30-second countdown before opening in windows with the temporary profile. As indicated by the pop-message no changes would be recorded. I could even change my user account image.

  I ran it again the DVD of recovery only to get the same problem. This NEVER happened when I ran on the original bios 1.70, bios recovery DVD AND 1.8 c.

  Anyway I came up with a solution to this problem, which only caused me no problem at the present time.

  I just logged into Windows mode without failure, entered the account administrator, created a new account and deleted the account of departure (created at the end of the recovery program).

  So far, the user account-wise, everything back to normal.

  If the recovery strategy or the bios did not cause this problem, I would be grateful if someone could give me some possibilities of doing just that.

  I don't want to get updates of bios from 5-10 down the road, only to find out that my recovery DVD does not work.

  Fact the DVD should be updated as well as the recovery bios?

  Thanks for your time.

  Hi, Conrad

  Can you please tell me why you do the updates to the BIOS? Have you had any problems? I use my unit for close to two years and I didn t make any BIOS update so far. If everything works well, it is not necessary to do an update with the exception of some Microsoft updates that make the OS more secure. Don t do any update if it is not necessary.

  In any case, I am very confused with your question. Normally, Recovery DVD should not be updated. The BIOS updates are useful if there is a hardware conflict or a problem and not a problem using the operating system or any software.

  It will be interesting to know why you're doing the recovery procedure each time after BIOS update.