Must use IEEE 1394?

Similar Questions

• P30: External hard drive is not detected when you use IEEE 1394 cable

  My P30 not / can not detect my newly acquired Western informed extreme Digitak Drive 320 when I connect via the firewire port. I use a 4-pin cable (which costs a fortune, by the way) who is supposed to be a way to connect this drive to a 6-pin pc.

  My ieee 1394 driver seems to be called 'VIA OHCI Compliant IEEE 1394 host controller".

  Can someone tell me what to do? I really need to connect the FireWire drive because I need the USBs for other devices.

  Thank you!

  Hi, Lars

  It is really strange. I use the external DVD drive (DL) using the same cable. I tested it with several units (old Satellite 1900, Tecra M1 and also new Qosmio G20) and everything works perfectly.

  Check the power supply to the external HARD drive.

• Transfer rate maximum by using IEEE 1394

  Hello

  I use an IEEE 1394 camera and I want to know how to be able to access the maximum transfer speed. Currently in the measurement and automation program I get access only to 100 Mbps, even though I know that the camera can do 800 Mbps. The initial pilot that I installed with the software was not compatible with Labview and so I had to downgrade the software a bit to be able to control the camera using Labview.

  Is there a difficulty in Labview or if they solved this problem in future versions of the software IMAQdx? I am running IMAQdx version 3.7.

  Thanking you,

  Adnan Sharief

  Are you by chance using XP (SP2 or SP3) or Vista?  If so, Microsoft has messed up their 1394b driver who fell from S800 to S100 speed, if the options are:

  upgrading to Win7

  downgrading the driver to the SP1 version

  use a driver of substitution that replaces the Microsoft driver (if your camera brand has access to a)

  Kind regards

  Scott

  PS I think this topic has answered elsewhere in this forum if you are looking for it

• attempt to import my video camera using IEEE 1394, but windows import doesn't appear?

  I have a hp dv6000 with windows vista home basic 64.  He used to work, but have been seen computer issued and re-stored at the factory and I did all of my updates since then. I hear the click when I connect but nothing comes.

  Thank you!
  Silvia

  The following links may be worth a visit:

  Windows Vista - import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  You may need to adjust the automatic run settings:

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

• DV4T-1400: IEEE-1394 Firewire

  My Sony camera will only download using IEEE-1394 Firewire

  Is it possible to make the DV4T-1400 accept the Firewire cable?

  There is a white card push. Under hardware it is said: slot ExpressCard/54 card (also supports ExpressCard/34)

  Can I do with it?

  Thank you

  Hello

  Please try a card which is similar to the following map:

  http://www.StarTech.com/cards-adapters/FireWire/2-port-ExpressCard-IEEE-1394-FireWire-card~EC13942

  Kind regards.

• Interface not found error when using Snap example for Firewire (IEEE 1394)

  Recently, I installed a SONY XCD-SX910 in interface with Labview 8.2.  When you choose the driver, only the Legacy driver would work for the installation of Firewire (R) (or IEEE 1394).  After installing the driver, I have images of the inteface to MAX.  However, when you attempt to trace through the example of Snap 1394 legacy since the document installation IEEE 1394, I get the error "Interface not found".  I tried a few iterations to try to name the camera as "cam0' (the name given to the camera to the MAX) and" cam0: SONY XCD-SX910.  However, the error continues.

  What should I name my camera so he could find the interface?  Will there be another underlying problem that is not obvious?

  Control of IO is not something that will be filled when you use the Legacy 1394 driver. If you use IMAQdx as your driver, it will fill. Thus, when you use the Legacy 1394 driver, you have control of the chain on your façade. When you use control of the chain, you must set the name of the camera as "cam0" as you did before. As long as this corresponds to what is able & Automation Explorer, you should be good as long as MAX uses the same driver that you are trying to use.

• When you try to import video JVC DVC using Movie Maker, Movie Maker does not recognize DVC using the IEEE 1394 cable

  Windows movie machine to import JVC DVC with cable IEEE1934.

  When you try to import video JVC DVC with movie maker. Filmmaker does not recognize DVC using the IEEE 1394 cable. How can I me Movie maker to see the CVN. Using XP SP2.

  Perhaps the following links will help you get started:

  Movie Maker and JVC Camcorders
  http://Papajohn.org/mm2-camcorders-JVC.html

  Movie Maker 2 - importing files MOD
  http://Papajohn.org/mm2-importing-video-mod.html

• Problem connecting my camcorder canon HV40 using the IEEE 1394 port.

  Windows Movie Maker (and other similar programs) will not recognize my camcorder. Mini-dv Canon HV40.

  I watched many forms and comments to try to solve this problem.

  Looks like I've tried everything.  When I uninstall the driver and restart my computer with the camera on playback mode, the device is found, takes me through the installation wizard and peripheral band AV/C, list host controller and about things but not the Canon camera.  The ToolTip that appears down right when the new hardware is found listed the specific Canon camera along the spirit the other stuff.

  On a random note, I uninstalled the IEEE 1394 and used the "Add Hardware" command to find the camera.  It worked once!  Grew up in windows movie maker and tried to download.  Along the way got a weird error 'photogalley' insert disk I have? Code of 1706.

  Never could make him again.  For only "device not detected.

  I get this error thing photogalley even when you do a scan.  If I hit Cancel enough that he leaves and the analysis was recorded.

  I'm just smart enough to be dangerous, but eager to get this resolved.  Any help most appreciated!

  I think that the way it should work if I turn my camcorder to play, the movie maker should take it from there.  Ouch who would be nice ~.

  Windows Movie Maker (and other similar programs) will not recognize my camcorder. Mini-dv Canon HV40.

  I watched many forms and comments to try to solve this problem.

  Looks like I've tried everything.  When I uninstall the driver and restart my computer with the camera on playback mode, the device is found, takes me through the installation wizard and peripheral band AV/C, list host controller and about things but not the Canon camera.  The ToolTip that appears down right when the new hardware is found listed the specific Canon camera along the spirit the other stuff.

  On a random note, I uninstalled the IEEE 1394 and used the "Add Hardware" command to find the camera.  It worked once!  Grew up in windows movie maker and tried to download.  Along the way got a weird error 'photogalley' insert disk I have? Code of 1706.

  Never could make him again.  For only "device not detected.

  I get this error thing photogalley even when you do a scan.  If I hit Cancel enough that he leaves and the analysis was recorded.

  I'm just smart enough to be dangerous, but eager to get this resolved.  Any help most appreciated!

  I think that the way it should work if I turn my camcorder to play, the movie maker should take it from there.  Ouch who would be nice ~.

  ==========================================
  Sorry... I have not * the * perfect solution. Looks like you're
  dealing with complex issues.

  However... I can offer a few links that may be useful.

  * Proceed at your own risk *.

  First of all, I would like to do a system restore to an hour before the start of this issue.

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Now... the following items may offer some useful ideas:

  Windows Vista-

  Import video from a videotape

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Windows Vista-

  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  If the AutoPlay screen does not appear... What follows
  Articles may help:

  Windows Vista-
  How to change the auto run settings

  
  http://tinyurl.com/y8oneuy
  or...
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  And... maybe the following will propose a few ideas:

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

  Windows Vista-
  Import analog video to your
  computer using a DV camera
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ae62d5e-29e2-41eb-B326-9e42ac46b7021033.mspx

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Qosmio G30: Cam Sony MV does not work with port IEEE 1394

  Qosmio G30-117 does not support my Sony DCR-IP5E (a micro video camera) port ieee 1394. I tried to use pinnaccle studio 9 and video ulead studio 10, but I could not see my cam because of these programs.

  There is no problem if I install a new win xp media center edition (retail pack) and CDTOOLS drivers. But I want to use my setup of the Qosmio factory, I don't want to buy a new win xp media center edition.

  How can I solve this problem?

  Thank you all.

  Hello Amon

  I tested it with Qosmio G20 and my Sony camcorder using the same port.
  I tested it with Windows movie maker, WinDVD Creator, Adobe Premiere and Ulead Media studio Pro 8.

  You may believe, but each application was able to see my cam and I copied movies on the HARD drive, edited and created DVDs. I don't really know what is happening in your case, but when you connect your switch cam on game mode, and the cam must be recognized as new hardware and listed in Device Manager.

  When it works well to start the applications and check again.

• Unable to connect via IEEE 1394 card reader in Satellite A100-988

  I tried to connect an i Link on my A100 port Compact Flash drive. I'm using a Firewire Extreme of Sandisk drive and the connection with a 4 pin cable 9-pin.

  Device Manager indicates that the TEXAS INSTRUMENT IEE 1394 CONTROLLER of BUS firewire is enabled and working properly. Unfortunately, my computer can not see the map. Any ideas?

  Hey Buddy,

  already enabled smart card service in the "services"? You must enable this service if it is not already done.

  You can reach services' by clicking on START-> Control Panel-> administration-> Services-> smart card tools

  Then go into this service, start him and to do as that kind of "autostart".
  I hope my tip helps you with your problem. :)

  Welcome them

• IEEE 1394 Port SL500 - does not work for me

  Hello. This is my first time.

  I tried to connect my SL500 to a recorder Digital hard disk using entrance to DVI of the recorder and the port IEEE 1394 of the laptop on the left side near the front. The goal is to save a slide show of pictures, or other photo folders, with music from Windows Media Player, on a recorder to external hard drive (made by LiteOn) where I can make a copy on a DVD-R. However, there is no signal coming out of the port IEEE 1394 laptop. When I plugged everything together there was a message saying that the 1394 connection has been recognized and ready to use. But still no signal. With no other connected external monitor, I tried Fn + F7 to display on an external monitor, but which was not allowed.

  I used the same IEEE 1394 cable in the past to copy the DVI output on my digital video camcorder on the recorder's DVI input Digital hard disk to make the DVD. So, I know that's not the problem.

  The website of Lenovo and Lenovo Care online help doesn't give any idea on how to make the IEEE 1394 port. Someone out there has a suggestion? My warranty expired about 1 month ago and support won't talk with me about this, unless I have buy a new guarantee $ 500 (approximately).

  I really like the SL500. It does everything I need and does it well, except for this problem.

  First check to see if your external recorder is displayed in Device Manager. If this isn't the case, drivers must be found either MSoft LiteON.

  For the port IEEE1394 SL500 transfer the data on your device external HARD drive you will need to walk manually assign a drive letter, if its not automatically on connection. That could be your second problem.

  Hope this helps

• HP FireWire IEEE 1394

  I have a HP pavilion 6803w with windows 7. Can I use this card, HP FireWire IEEE 1394, for capturing from my Canon camera?

  Your HP a6803w expansion slot: 1 PCI Express x 16 slot for a graphics card, 2 PCI Express x 1 slots and 1 PCI slot... 1 slot PCIe x 1 used for the 56 K modem.

  That leaves 1 PCI slot or 1 slot PCIe x 1 for your Firewire card. According to the exact p/n of the HP Firewire card, it must fit into one or the other location.

  If your camcorder Canon provided with a Firewire cable and has a port Firewire/plug top then you'd be good to go.

  Frank

• Question about satellite for MAC via IEEE 1394 connection

  Hello

  I have a laptop Equium I have connected to a box of OS x via Firewire to transfer files and use the functionality of the Macintosh to share Internet via IEEE 1394. Someone can tell me why, when I plug the Firewire cable, WinXP detects a new device that doesn't have a driver for the laptop?

  The Firewire device is already installed and seems to be working properly before plugging in the cable.
  Thank you!

  Hello

  Sorry, but I have never tried to connect a Mac with a Windows unit.
  As I know the Mac operation use another file as units of Windows mode.

  Usually, the best way is to use a LAN cable and not a firewire cable to connect the two computers. Firwwire does not support the IP or / and TCP protocols.
  In this case I don't know how the conection it works without all the protocols.
  However try to connect the devices via a LAN cable.

  Please also see this page:
  http://developer.Apple.com/

• SP A10: XP SP2 and Maxtor IEEE 1394: need MS patch?

  I have a Satellite Pro A10, hooked up to an external Maxtor 80 GB of disc over a Firewire/IEEE 1394 link.

  IEEE 1394 is attached to a card PCMCIA (from Belkin) that uses the NEC 1394 chipset.

  A hotfix is available from Microsoft (see http://support.microsoft.com/default.aspx?scid=kb;en-us;885464) but the MS Support saying this can only come with the support of Toshiba.

  Can you help me get the fix?

  Without it, I can rarely access the drive.

  It works fine on my Tecra M2 that accesses the same disk through its integrated 1394 interface. The problem only occurs with the NEC 1394 chipsets.

  Hello

  Well, have you contacted Belkin support?
  In my opinion, you should ask manufacturers of PCMCIA cards for the upgrade or this hotfix. In addition, you can check the drivers Toshiba download page for this fix. Microsoft patches are known as QFE. Maybe you will find one that suits. But unfortunately, if you are not able to find it, you will have to wait for the next service pack for Windows XP which will include this fix. :(

  Good bye

• IEEE 1394 USB on the macbook Air

  Hi, I tried to transfer my videos from my Canon ZR960 to my MacBook air with a Firewire (IEEE 1394) port for USB cable, but it doesn't work, my mac will not read the camera and won't be on side windows on the BootCamp partition. How can I fix, how can I transfer the videos (on mini cassette) to my MacBook Air?

  It is greatly appreciated.

  MacBook Air (2014)

  OS X 10.11.3

  Canon ZR960

  Mini DV

  IEEE 1394 (firewire) to a USB cable

  Hi luis098765,

  I see that you have problems when you try to import MiniDV video from your camera to your MacBook Air. I see that you try to use a USB FireWire-cable to achieve this. I would suggest that you use a FireWire adapter rather Thunderbolt as a USB connection does not allow you to import the tape media in your computer. More information can be found in the following articles:

  Final Cut Pro x: import of the cameras tape

  https://support.Apple.com/kb/PH12743

  If iMovie doesn't recognize or control your camera or camcorder - Apple Support

  https://support.Apple.com/en-us/HT204537

  Thank you for coming to Apple Support communities!