HP Pavilion dv6700 - cable power button ribbon and Ribbon of Touchpad?

Similar Questions

• G62X-400 (ld642av) does not load, power button ribbon cable could be damaged.

  Laptop of the friend's daughter had a problem with the cable going to the LCD.  When opening it I noticed a few missing screws of the machine near the back and the middle. I disassembled and made the display cable stressed I guess because the flex of the missing screws and when pressure is applied, the screen would come. I replaced the cable and all right, or so I thought.

  Problem is that the tablecloth of the power button seems to be a bit funky as well.  Wouldn't really go back in the connector zif or flip back connector and the small bar on the connector ended detach.  I thought I got it on, it came on, but I didn't know it was apparently no longer take a charge.  Bottom line is that the laptop ran until the exhausted battery.  If the power button is damaged, preventing powering the laptop or charge the battery or something else?

  The answer is Yes - when I force the cable using the pressure, it charges the battery and agrees by the charger.  I'll have to get a new power ribbon cable, because he seems to have lost some of the metal contacts on the bottom.

• Pavilion 27bw monitor power button is unresponsive

  This has happened once before and I forgot how I fixed. No message power button lock or anything. I tried to unplug for a few minutes, she held down for a minute, nothing. I get static when I touch it sometimes but managed to solve this last time. Suggestions?

  Hello again ebonyruffles,

  If your issue is resolved now could mark my post with the solution with an acceptable Solution. This will help others who have the same problem like you to find the solution and share the same solution.

  I'm happy to have helped.

  Thank you

• Pavilion: seeing the power button

  Whenever I turned off my laptop, the power light turn off every time. He died 1 in 10 times. Rest of the time it stays on and if I don't notice that all the battery is consumed.

  I have to press the power button to turn off most of the time after giving the stop option

  Dear customer,

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

• My his laptop makes a beep when I press the power button / stop and it does not start

  Hello

  I bought a new Dell Inspiron 15z touch ultrabook and when I pressed the power button, it starts to beep and won't start. The screen is totally blank. What should do? Help, please

  -Mayur gala

  Hi Mayur,

  Welcome to the community,

  Sound signal can be used as a diagnostic indicator. The computer may emit a series of beeps at startup if errors or problems. This series of beeps identifies a problem and is called "beep code".

  See the table below which shows the beep codes and the possible problem:

  Overview of beep Code
  Beeps	Description	Possible cause
  1	ROM BIOS checksum failure	The map system, covers BIOS corruption or errors ROM failure
  2	No memory (RAM) detected	Memory or memory slot failure
  3	Chipset error (North and South Bridge error) Time-Of-Day Clock test failure Gate A20 failure Super i/o chip failure Keyboard controller failure	System board failure
  4	Memory read / write failure	Memory failure
  5	Real Time Clock (RTC) power failure	CMOS battery failure
  6	Video BIOS	Video/smart card failure
  7	Failure of the CPU	Processor failure
  8	LCD SCREEN	Failure of the LCD

  Let me know if you need assistance.

  Thank you

• Pavilion dv6-1140ew: 1140ew button Mute and the wireless button disappeared

  My Mute button and the wireless button disappeared. They are neither orange nor blue, they are not highlighted.

  I did my Lalonde normal and regular cleaning. With the help of the manual I disasembled the phone until I could access the fan/heatsink and clean it with air preasured. After reassembling the laptop, I discovered that the two buttons are not appearing on the cover of the switch. I thought that I must have failed to plug something properly, but after checking twice, I am sure that everything is as it should be. The wireless card works perfectly, so are the speakers. The computer turns on automatically (I'm actually hit him), wifi works perfectly (well, I'm on it) scrolling volume works ok, so media buttons. But everything I try, I cannot get the Mute and buttons wireless to work once more.

  Any help would be welcome.

  PS.

  I tried the hard reset, with deactivation of all sources of power. Does not work.

  Hi @Schanez,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-1140ew Notebook and the Mute button and the wireless button not working not properly. This package contains the software that enables the quick launch on the keyboard to program buttons. Simply download and install sp46731.exe.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• Pavilion x 360: backward buttons brightness, and brightness settings

  Hi, I'm having a few problems about the brightness of my laptop.

  First of all, when I turn on my laptop, the brightness is always on the dark night I can't see the screen. I've been on all the settings and put the brightness that max for both when it is plugged into the power supply and not. And yet, whenever I turn it on, the light is not on and the screen is completely black.

  Second, my brightness buttons are upside down, so the button should I press to decrease brightness increases actually, and the button I push to increase the brightness decreases actually it.

  Once again, I looked in the settings and can't find anything to change them - I have not downloaded or installed anything that should change them, I literally use the laptop for microsoft office and the internet.

  Help, please

  Try disabling the QuickStarts, which seems to help with the problems of this kind. I hope that the problem will be corrected in a future update, but until then, you can try this:

  Windows + X to open the power options
  Click on choose what the buttons to
  Change settings that are currently unavailable
  Scroll down to the Tower in the quick start (recommended)
  Uncheck the option to turn it off
  Save your changes, and then restart the computer to see if that helped.

  Not with screenshots: http://www.howtogeek.com/243901/the-pros-and-cons-of-windows-10s-fast-startup-mode/

• Pavilion dv5 1000s: power of bios and reset admin password

  can not access my admin of the bios because I did a really complicated password and now I can't find it anywhere:

  After entering password wrong three times, I get this code: 55772809

  could you please send me reset code based on the number I have provided above?

  Thank you!

  Hello

  Please try

  40650229

  Kind regards.

• HP Pavilion g7: wifi power button not working not not after having reinstalled windows 7.

  so I'm here on behalf of my friend. It re installed windows 7 on his laptop now nothing on the motherboard works. I downloaded all the driver for networking for him, but still nothing. I searched and tried different things, but still can't make it work. Here are a few screenshots. If you need more information I will provide.

  

  Hello:

  Here are links to the drivers you need:

  SMBus: Installation and reboot.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_119081_1

  USB3: Install these two and restart.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229463&swItemId=ob_125616_1&swEnvOid=4058

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229463&swItemId=ob_123787_1&swEnvOid=4058

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56467.exe

  Network controller:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229463&swItemId=ob_104981_1&swEnvOid=4058

  Unknown dev:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_114792_1

• HP Pavilion G4: forgotten power on password and admin

  I'm stuck on my hp laptop. After that 3 bad attempts I get a code that is (73918657).  Could you please help me?

  Thank you

  Laurie

  Hi Laurie,

  Enter: 62670299

  Kind regards

  DP - K

• Pavilion G6 2338sl: hardware button to turn off the touchpad does not work on Windows 10

  Hello

  I have a Pavilion G6 mobile 2338sl. When I was on Windows 8.1 the touchpad worked a lot, so I've updated for Windows 10. Windows updated my drivrs to last, provided also by Synaptics (19.0.19.1). HP says the moment is upgrade from Windows to provide the driver for this laptop, as you can see on the driver support page. The touchpad works, the parameters can be set (gestures etc.), the touchpad turns off when another mouse is connected (it's ok).

  The problem is that if I use the touchpad and I want to turn off the button, it does not work and the computer reacts like a click. So I returned to the old driver and button works. But Windows Update continusly updated the driver (I disabled the option in the advanced settings, but it still update) and I come to every time.

  So I tried to reinstall Wndows freshly (not update Windows 8.1) and with the old driver works, but when she updates to 19.0.19.1, the button to turn off the work stoppage.

  I looked on the interent and someone tips to set minimum detection of palm. I tried but it still not working.

  I hope someone can help me

  Concerning

  Hello

  If you find that the old Synaptics driver works Ok, install it and then use the utility on the following link to prevent Windows 10 to automatically update again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Pro 3 yoga and Hibernation power button

  Hello

  I have a problem with turn on the laptop after that it goes the way standby mode Hibernate (no doubt).

  Since the beginning, I installed Win clean 10 with the latest drivers of Yoga.

  Now when I put the Yoga sleep (power button flashes) and after an hour or so later Yoga switch to hibernation (power button stops flashing) I cannot wake it up by pressing the power button. Instead, it shows the Lenovo logo and turns off by itself. After that it works in a normal way - by pressing the power button / stop lights but don't relax after previous hibernation.

  Can someone help me with this problem? It is quite annoyng. This means that I always have to save all my work before Yoga put to sleep.

  Thanks for any help.

  Finally, I managed to solve the problem with the power button. I had disabled setting Fast Boot under windows, and everything works as it should.

• HP pavilion dv6-1352dx power supply issue

  Hello. My hp pavilion dv6-1352dx crossed a State gradually after that I received a warning to consider replacing the battery. Using Windows 7, 32-bit. Now seeing AC is turned on when it's plugged in but the battery charging light keeps blinking and turns off after a while. Tried holding down the power button / stop and from ac only who worked initially but turns off after a few seconds and now does not work yet. Looking for solution for 8 months now. Hard drive works with other PCs and have reset the memory. Thank you.

  I suspect the module plug AC, which is removable and replaceable and not very expensive. It could be a bad mother, however.

• My Mac Pro 2009 gives me only a power button blinks when I try to turn it on.

  My Mac Pro 2009 gives me only a power button blinks when I try to turn it on. External drives turns on but not the computer or monitor. I tried holding down the power button to restart but I still get only a power button blinking and no departures. It is running IOS 10.8.5 and I use it mainly for recording and mixing of music. I use Digital Performer and, sometimes, ProTools. Nothing new has been installed recently.

  fans on, power button flashing says "not enough RAM that works correctly for starting up".

• power led on the rear of the computer the power button / stop turns on, then turns off.

  I have a HP TouchSmart 610-1015xt.  The light on the transformer power is on, but not exactly brilliant (I think it's good, but not sure).  The light next to the power input is on.  When I plug in the power, the power led lights up for a couple / few seconds then turns off and does not turn.  At no time the computer capable of running and it does no whether noise (no fans, no beeps, no attempt to start.

  Any suggestions?

  Figured it out.  Apparently I have reset the battery internal and then unplugged the power button circuit and then he started upward.  The only problem is that now it will restart automatically every time it is closed or even sleep.  I'll start another forum on this issue.

  Thank you for your help.