My 580 nine one y key theatre does not work!

Similar Questions

• Reset password screen is coming and key board does not work

  Hello

  When I wake up in the morning and tried to start my mac pro 13 book he has not begun and this window appeared on the screen saying reset the password but unfortunately I can't type password as key board does not work... What to do now...

  

  Try to boot inSafe Mode and see if the problem persists?

  Restart now ' shift '.

  (Wait to take more time to start in this way because it runs a check of directory first.)

• Qosmio X 300-key Fn does not work

  Hello!

  My work does'nt-Fn button.
  I use Windows 7 Professional 64 bit and I downloaded & installed the value added package for Windows 7 64-bit.
  But my Fn key still does not work.

  So I uninstalled all drivers Toshiba again and reinstalled them.
  Nothing seems to work.

  What can I do?

  EDIT:
  I tried to find the Flash Utility card drivers for Windows 7 64 bit. But I can't find them anywhere!

  Post edited by: wuumbs

  > I tried to find map Flash Utility drivers for Windows 7 64 bit. But I can't find them anywhere!

  Of my knowledge Support Flash Card utility is not related to a specific model laptop.
  On my Satellite a series of laptop I installed Support utility of the Flash card that I found in the section L500 and it worked.

  Try this too maybe you control also the series which is more recent than L500.

• Inspiron one 2320 touch screen does not work

  I have all in one, my touch screen does not work. I have Windows 7 How do I work?

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19456063

  or by post to this community to get help.

• How can I get an alternative serial number if the one on the CD does not work?

  How can I get an alternative serial number if the one on the CD does not work?

  Hello

  Please see the below help documents:

  Invalid serial number error

  Error: "serial number is not valid for this product". Adobe Creative Suite

  Kind regards

  Sheena

• 'Write Key.vi' does not work after generation

  I'm having trouble with the "Key.vi write" I use it to record the calibration values in an .ini file. It works fine when running in mode of development, but after that I build it into a stand-alone exe it does not work. It will create the file in the correct folder, but it is empty. I don't know how to figuing this one initially. Any help would be greatly appreciated.

  The following code stores the configuration values in the .ini file. I'm using LabVIEW 8.0

  

  Why my executable does not work when you use the constant path of the current VI? -Knowledge base - Support...

  I'll let someone another chime in here about all local variables. They are there, waiting in the bushes, ready to pounce when they see one of these little critters. It's always the season for them.

• Qosmio G30-223: keyboard key '2' does not work in console/konsole/xterm in Debian

  Hello

  I installed debian on a qosmio g30-223, it works correctly except the key of a keyboard in console/konsole/xterm.
  Under KDE, all the keys work but when I'm under a console (without xorg), konsole or an xterm, the '2' key (shift + a) does not work.

  It is a french keyboard layout and a card keyboard fr-latin9. Before connecting, the key also works.

  Any ideas?

  Hi face,.

  I have gentoo with 2.6.17 kernel and windowmaker as office. I know this problem. Maybe it s an idea to check the file xorg.conf to map keyboard under X then to change the keymap under console as X replaces the console overview.
  If the worst comes to the worst, try "dpkg - reconfigure console - data ' to choose a new layout for your page layout.
  I think that there are more keymaps under the hull for french available key-layouts, just to play with it. :)

• Satellite L850 - 13N - function keys ("FN") does not work

  Hello

  I have Toshiba Satellite L850-13N with Windows 7 x 64. The problem is that my function keys does not work. Could someone write me that I need to install drivers?

  PS. Sorry for my English :)

  Thanks for the help.

  Hello

  Are you using the original os that you got with your laptop?
  What you need is Toshiba Value Package added. Try please reinstall.

• 2 magic the fn key keyboard does not work (PC windows 7), so I can't exhaust remove fn, fn, fn low... and so on...

  2 magic keyboard fn key does not work (PC windows 7), so I can't use Up, fn, fn + DEL, fn + down... and so on...

  Assuming that 'Boot Camp', correct?

  Search here > https://www.google.com/search?q=magic + keyboard + 2 + windows + on + a + mac + boot + camp + site: apple.com...

• These recent key apps does not work does not correctly

  My recent phones apps key was no longer works. He works in time more than 2 out of 10, or less. Any body having the solution for my problem.

  Try restarting your device first. If it still does not work, then maybe try a Factory Reset.

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• The CD/DVD drive malfunction: one missing, the other does not work

  My HP Pavilion dv6000 laptop running Vista, came with a CD/DVD drive that appeared as a reader of CD (e) and (f) HD DVD player, with the hard drive and windows repair partition C: and D:.  There, the E: drive seemed to have disappeared, and it is the reader who would access it when I put a CD to read from.  The HD player never worked to this end and of course now that I only have the "F:" drive, and it tells me to insert a disc, despite the fact that there is a disc in there.  And I have no idea of what I did.

  I right click on the HD drive properties and go to the Hardware tab.  WDC (Buncha numbers) ATA device is listed as type of hard drives, and UTIHAX (even numbers) SCSI CdRom Device is listed as a DVD/CD-ROM drives drive (Yes, with the ').  Both work properly, according to the properties of the device.

  I tried to disable and re-enable the it.  I tried to uninstall and allow the pilot to resettle.  Nothing doin ' sofar, so I was wondering if any of you have any other ideas I could try.

  I'd love to hear them!  Let me know what you need.

  Hello

  Even if the conditions are slightly different the same cause may be at stake.

  Do not forget to check with HP, their documentation online support and drivers and the HP
  Forums for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  -------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• char key shortcut does not work

  Hi all

  I added a keyboard shortcut for my button in my application, I try to test it on Simulator with JDE 4.5, Curve 8300, I want that when the press 'Enter' button the user, the application move to "happy" page, the "Enter" button works. But when the press 'C' application user move to the "happy" page, but it does not work, this is my code:

  CustomButtonField colour2 = new CustomButtonField("C\u0332ontent",  Field.FOCUSABLE | Field.FIELD_HCENTER)
  { protected boolean navigationClick(int status, int time)   {
              System.out.println("In Button");
              getApp().ContentsMunif(-2);
              invalidate();
              return false;
      }
      public boolean keyChar(char key, int status, int time)    {
              if (key == Characters.ENTER || key == Characters.LATIN_CAPITAL_LETTER_C)      {
              System.out.println("In Button");
              getApp().ContentsMunif(-2);
              invalidate();
          }
          invalidate();
          return false;
      }
        public void paint(Graphics graphics)      {
              graphics.setColor(0xffffff);
                  graphics.clear();
                  super.paint(graphics);
              }
  }
  

  Please help me, the 'C' key does not work why? What is the error in my code, which is that it does not work?

  I'm kind of multiple personality disorder

  Try

  key == 'c '.

• Multimedia keys sometimes does not work

  HP Pavilion DV4 1290el

  Windows 7-32

  Multimedia buttons sometimes don't work (buttons on wifi/audio/multimedia etc. etc. at the top of the keyboard)

  My company send me a new laptop (HP Pavilion DV4 1290el).

  Multimedia keys sometimes freezes and does not work. Then I can't turn on the wifi radio.

  I tried:

  -update the firmware (F.66)

  -Reinstall the driver of quick buttons

  None of them does not solve my problem.

  Any suggestions?

  Thank you very much

  Hello

  See if a reset helps the issue.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

• Satellite A40 - 231 - Fn + F6 and Fn + F7 key combination does not work

  I have toke my cell phone to a technician for formatting.
  However, when I tried to adjust the brightness of the display by pressing Fn + F6 or F7, it does not work.

  This function does not work on my laptop.

  Advice please?

  Thank you
  JAMA

  Hello

  Go to the page of European driver of Toshiba.
  He chooses;
  Archives of the series Satellite Satellite has Satellite A40 Win XP

  Now, you will get all the Win XP drivers for this laptop.
  You must install the common Module in first, then the energy saver.

  Check it!