My 6 s iPhone is bricked

I have a laptop with installed 12.2.2 10.7.5, today I went to update my son of 6s to iOS 10 using Dungeon in dfu mode, got about 60% and error 1. so I tried 9.3.5 the iTunes 12.2.2 .error 1 as well... I feel horrible about this situation because she is a busy woman and uses his phone for work, so I gave her mine. But what blows my mind... error 1? phone is very good... no escapes or anything like that... it's not supposed to.

You will need the latest version of iTunes computer 12.5.1

Your Mac OS X must be 10.9.5 or later version

Tags: iPhone

Similar Questions

  • IOS 9.3.2. iPhone 4S brick

    Hello guys I have just updated my iphone son´s 9.3.1 to 9.3.2 4S but the iphone is brick saying 'connect to itunes '. But nothing is work downgrade, restore, update all fails with the error 29. Any help? It seems that my iphone 4S has the same disease as ipad 9.7 pro.

    The iPhone is in recovery mode. You will need to connect to your computer, and then restore it via iTunes on your computer.

  • If my iPhone is brick, can I replace it with the apple warranty?

    I'm still under warranty of one year of iPhone. If my iPhone gets bricked can I replace? There is no jailbreaking or other malicious activities. Also I was jailbroken in the past, I'm not now of course, but they can follow the which?

    Thank you.

    Is it has been jailbroken, then they will not help you.

    Sorry

  • IPhone 4S brick after put 9.3.5 updated

    I have an iPhone 4S which recently prompted me to download and install the latest 9.3.5 update.  At halfway through the process stopped updating, and now the phone keeps stuck in mode 'connect to iTunes '.

    I tried restore and update regularly through iTunes as well, and the restore process ends with an error (29). Error message is:

    The iPhone "iPhone" could not be restored. An unknown error occurred (29).

    1. my phone is a factory unlocked phone, so no Jailbreak etc has never been done

    2. I was able to update my phone until 9.3.4 with no problems before this

    3. I changed the usb cords, computers etc.

    4. my iTunes is the more up-to-date version.

    Has anyone else seen this problem as well on the other iPhone 4S? Any ideas on how to solve this problem?

    just tried to do the same thing on my 4S - bricked with the request to connect to iTunes - which did not help if - error 29 (or 39?) ensures the Outlander when I have that either opt to choose to update or restore

  • IPhone 6s bricks after updating iOS 10

    I am of the unlucky few phoning in brick to the iTunes screen or the iOS 10. now I was not back up my phone ahead, and now I do not know how to actually use my phone or attach it bricking. Help, please

    Recovery mode > If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

  • 10 bricking my iPhone i0S

    I am aware that people have had their iphones in brick after that 10 updated, and Apple iOS said it's been fixed, but my phone seems to be brick.

    I downloaded the update on my phone and connected to itunes via USB when you ask him of the screen. It completely downloaded, and I clicked on the iphone eject button in itunes. Now it is stuck on the screen instructing you to connect the phone to itunes.

    What should I do? Install the update again?

    Your phone is in recovery. Something might have happened during the update. I suggest you do a recovery of strength using iTunes

    If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

  • How apple will charge repair me my 6 s brick?

    iPhone is brick due to the bug in 1970. How can I pay to apple?

    Probably nothing. But they will tell you exactly when you take the iPhone.

    Make sure that you have an appointment. Its limit to be a little crowded.

    http://www.Apple.com/retail/Geniusbar/

  • Repair iPhone-policy irreparable?

    Glass of my iPhone was broken on Aug.

    The glass has been replaced in the laboratories of my carrier with a non-original screen without my awareness.

    The touch sensor ID recently started functioning power on and off until it has completely stopped responding.

    I already managed to day 9.2.1 and my iPhone worked without the touch sensor of ID.

    I erased the iPhone and it downgraded to 9.2 and the ID of touch began to work again. After a few days, he stopped and has never worked since.

    I have updated to iOS 9.2.1 and the iPhone is brick (impossible to downgrade from 9.2 in unavailable).

    A premium dealer told me that a glass cannot be replaced without replacing the ID of touch as well. And their policy, as well as Apple is to change to another iPhone.

    Apple representative told me that they don't check and fix my iPhone, nor will the premium reseller (even to understand if I have original parts or not).

    I do not understand, if my iPhone screen is broken so I have to buy a new iPhone?

    My brother's iPhone glass was broken, he was replaced in his iPhone and a third-party laboratory 6 works with 9.2.1.

    I don't understand if the glass needs to be replaced by contact ID.

    I don't understand if unoriginality of the glass itself can lead to become a brick with the iPhone.

    I do not understand if everytime my glass, I have to buy a new iPhone

    I do not understand if I can find a way, if I have an original Touch ID or not (not Apple or a preseller Premium want to help)

    I do not understand if I can save my iPhone, if my Touch is damaged or just mundane parts

    Help, please

    Thanks for the help

    Your problem is with your carrier. They cancelled all guaranteed and forfeited all rights to the service by Apple when they replaced the screen with a counterfeit. Talk to them on this subject.

  • iTunes does not appear the option to check the iOS Software Update

    I have a 6 more than 64 GB iPhone with iOS installed 9.3.5, laptop HP Windows 7 (SP1). The latest iOS updates bit (of IOS 8 or 9, I did "over the air" rather than connecting to iTunes on my laptop.)

    This time, with 10 being released iOS and reading online on a certain number of iPhones in 'brick' update 'over the air', I decided to update by connecting via a USB/lightning cable to my laptop and iTunes.

    When you open iTunes on the laptop by clicking on the device (iPhone) and the 'summary', she properly showed the current software on my phone (iOS 9.3.5), but no option for "check for updates". He also says "Connect this iPhone with a USB cable in order to update or restore it is a software", which seems strange, because it is connected via USB and is recognizing the version of iPhone software up-to-date and correct. After not being able to understand why, I have found also that iTunes 'control upgrade' says that v12.1.1 has been current. After some research online, I came across a Web site that shows iTunes was up v12.4.3 at the time of writing. Therefore, I went on Apple's site to update iTunes, as I couldn't do to in iTunes itself. I found that the latest version is 12.5.1.21 I downloaded and installed (without uninstalling the previous version first). Still the same problem. Then, I uninstalled this version latest and updated to iTunes on my laptop and reinstalled. Still the same problem.

    I was able to 'Sync' and the phone to iTunes with no problem at backup.

    Can anyone help please?

    Post edited by: colboy58

    I considered just take a chance and update the iphone software app 'Settings' of the phone with the ability to do a "restore" via iTunes on the laptop if I ran into problems. Then, however, I found that the button "backup restore" in iTunes was "greyed out" and not "clickable".

    Hi colboy58,

    Thank you for using communities Support from Apple!

    If I understand your message that iTunes appears that a software update is available for your iPhone 6 Plus. Since iTunes showed previously that it was also updated, there is probably a problem with the security on your PC iTunes software to communicate with our servers.  Please follow the troubleshooting steps in the link below to get started:

    Solve the problems between iTunes and third-party security software

    Take care.

  • iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

    iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

    After the update to ios10, my 5s iPhone seems to work very well. I reconnected it to iTunes and then it bricked, and I panicked.

    iTunes synced a couple of times, it took about an hour and a half for me. After that it stopped its cycle of synchronization, I unplugged my iPhone - it still bricked. I then did a hard reset and it worked.

    Maybe I got lucky, maybe my iPhone and iTunes need a kick in their buttocks.

  • IPhone bricks 6 after 9.3.2

    I am EXTREMELY * RIGHT NOW... I've just updated the 9.3.2 update and it bricked my phone.* * APPLE? I had so much data out there, I was going to backup but didn't because I didn't think it was necessary because it was just a simple update. THE ONLY THING THAT I WORRY ABOUT IS MY VIDEOS. How tf I download those out of it. When I go into itunes, it is says something like, "this iphone is locked and cannot connect to itunes without entering the password".

    I NEED THESE VIDEOS. I'm fine I NEED to do a restore is just YouTube videos. Please, I'm SO * right now please help me

    Apple you for making me spend by *... * I YOU!

  • January 19, 2038 brick iPhone 5

    I just use my iPhone 5, and I went all the way until January 19, 2038 and somehow that it was bricked.

    Why did you do that? Is - this another internet scam as the 1970 that promise magical results?

    You can try to reset the unit by pressing the Home and Power buttons at the same time until the Apple appears (up to 30 seconds). If the Apple appears, reset is underway and the Slide to Unlock screen displays shortly.

    If the reset does not work, you can try to put it in DFU mode to see if it will work: (Note: you must follow these instructions to the letter - if you have not, then it will not work):

    Enter Device Firmware Upgrade

    (DFU) mode

    A device after entering DFU restore

    mode, it returns to a known good state

    with the certainty that only unmodified

    Code signed by Apple is present. DFU mode

    can be entered manually: firstly connect

    the device to a computer using a USB

    cable, then hold both home

    and sleep/wake buttons. After 8 seconds,.

    release the sleep/wake button while

    holding down home

    button. Note: Nothing is displayed

    on the screen when the camera is in

    DFU mode. If the Apple logo appear,

    the sleep/wake button has been held down

    too long

    If none of those working, then you need to take in to Apple to see if they can repair it for you.

    GB

  • Can I use the mini iPad charger brick 4 10W to recharge my iPhone 6 s?

    I just upgraded my mini iPad to 4 and it comes with a larger loading brick - it looks like a mini MacBook charger block and is labeled as 10W. Is this compatible / safe to use to recharge my iPhone 6 s?  I wouldn't mess up one or the other. In addition, can I charge my iPad mini 4 with standard chargers for iPhone 6s, 6, etc.?

    Yes and Yes.

  • iPhone 5 s brick after the change of time

    Hello, I was playing around with my settings Date & time and the clock to January 1, 1970. I stop my phone, rebooted, resulting in a bricked iPhone. I tried to restore, update, but nothing seems to work. Is there anything that apple can do for me? Looks like a bug on their part, and if there is a problem with the time Unix the phone should know better than to let the brick of the user of the phone.

    Well, Apple (and any manufacturer) decisions are stupid of their clients. And I don't know that it has never occurred to Apple that someone would do something like the time setting for the start of the Unix clock, so they never tested. If you haven't done so already, consider doing a DFU restore:

    • Install the latest version of iTunes on your computer, if it is already there (note that the latest version requires Windows 7 or later or OS X 10.8.5 version or later version)
    • Restart your computer
    • Disable any antivirus and firewall
    • Launch iTunes
    • Connect the cable of the device to a USB port on the computer (not a USB hub), but DO NOT CONNECT to the DEVICE AGAIN
    • Press in and hold the HOME and SLEEP at the same time for 10 seconds exactly, buttons until the screen goes black, then release the SLEEP button but continue holding the HOME button. If the Apple logo appears then that now the two buttons, you who was held for too long; start over.
    • While holding down the button HOME connect the other end of the cable to the device
    • You should see a message in iTunes saying there were a phone in recovery mode (it can take up to a minute for the message appears). When you see this message release the HOME button and the device must be restored. When asked DO NOT restore a backup. set up as a new phone.

    This process uses a primitive boot loader in the phone hardware and bypasses iOS completely, so it should not see even while the phone is set on. Please let us know if you try it and if it works. If not I suggest that he again.

  • How can I fix my (3rd party renovated) iPhone 5s which became brick?

    I bought an unlocked iPhone 5s from a 3rd party vendor so that in the United States. I set up with a PAYGO of T-Mobile SIM card and used for two weeks in the United States and two weeks in the Mexico. On or around the day of the month of T-Mobile has expired, the iPhone has stopped working. It does not start (screen lights up, but it is white/black) and trying to do a factory reset with iTunes have failed.

    Not yet bought a SIM card from a local supplier to the Mexico. The SIM card is the problem or is it the phone? Can what additional steps I take to reset? Is there diagnostic tools that will run on Mac OS X or Windows?

    The phone would always start even without a SIM card. I contact the vendor that you bought the and see if they have the warranty at all.

Maybe you are looking for

  • Satellite P10 804 of illegible text view

    Hi all This is problem 2 weeks ago. in which the text on some site have become illegible. I have not had this problem before. the screen is wuxga, 96 DPI definition.tried to reduce wsxga, wxga, wxga definition nothing helps. even increased to 120 DPI

  • How to configure Windows Explorer to open the folder in a single display always?

    When you open a folder in Explorer, I would like to see the content in single glazing without view on the left side; always in this way.  Is there a way to get there for me and admin privilege it takes to get there?

  • Local access only

    Recently, a friend of mine, using Windows Vista, configure their internet in their new home. Everyone, save itself, is able to connect to the network, including myself. We all, however, to use various versions of Win 7. I was not able to confirm if s

  • The upgrade GPU and PSU for Optiplex 9020, baffled by connector 8 pins. !!!

    Hi, I have a game related question if you want. I recently acquired a brand new 9020, was surprised by the performance and was eagerly expected put in my old Redeon HD 5770. However, I was faced with the question of the connectors on the motherbioard

  • How can I find and play my video?

    I downloaded videos from my camcorder to my PC, then used Windows Media Player to synchronize with my Moto Droid. He finished, and I expected to find in my Gallery. They don't show there. Anyone know how I can locate and read my video synchronized on