My 6500 Office jet suddenly began a squeal when printing.

Similar Questions

• HP 6500 Office jet E709a - black HP 920 cartridge printer does not

  My blck ink is not, the Panel indicates that it is about 2/3 full. But it does not print anything in black. I turned the printer off and back and I remmoved the ink cartridge and put it again. I don't know what else to do.

  In this post troubleshooting steps can help solve the black not printing in printers with inks separate (one for each color) and removable heads.

  In some cases, it may seem that the black is not printing, but it may appear in the pages of test or when the brilliant media is selected in the driver.  Black pigmented, used in most HP inkjet printers is not compatible with the glossy media.  When brilliant media is selected, the printer will use color to render black areas.  [A similar process is used in the pages of diagnostics of some printers.  [So that the information can be read, even if some colors or black don't work.]  If in a pinch, you need to print in black you see acceptable temporary results by changing the driver settings to select the glossy photo paper.

  To address the underlying issue of clogged print head black, the following may help: first check the vents of the ink cartridge is properly erased as shown in the fourth Solution here.

  1. Figure: Area of wind

• HP 6500 Office Jet: is there a difference between an office jet 6500 and the other with a 'a' or 'more '.

  Hello, first post here.

  They gave me an office jet 6500 without the cd rom set up the disc. The Unit came with 4 new cartridges. Started trying to get to the top and running and first it attracts not paper. Checked this site and resolved that. (temporaily?) Then saw that it was low out of ink. Installed the new trolleys. Colors work very well, but not black.

  I have no cd rom for this and not manual.

  I see that you can download the establishment, but was intrigued by the mention of a 6500 and 6500 more, not sure I have those. On the front it says "HP office jet 6500 wireless.

  So I guess I have to run the cleaning jet. I started scrolling menu, but was rerouted it says there is no connected computer. Do I need to clean the jets?

  I could shoot for today with a work properly stand-alone copy/printer. But I would not mind at all followed with setting up wireless on my sony pcv-rx752 pc. We use at + t here with a wireless router.

  Hello

  First, click on the install button, select network and follow the Wireless Setup Wizard to connect the printer to your home network.

  Then download and install the following drivers for wireless HP Officejet 6500 (E709n) model:

  The 6500 has a different model then one you have...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77752-3 & CC = US & DLC = in & LC = on & os = 228 & productOid = 3795393 & sw_lang =

  Shlomi

• HP 6500 Office Jet: printer ink

  I have a hp office jet 6500. Will be the office jet 8500 work ink cartridges?

  Hello

  No, they use different cartridges. For the OJ 8500 ink cartridges can be used for other 5 printers:

  http://WWW8.HP.com/au/en/products/OAS/product-detail.html?OID=3777789#! tab = compatible_hosts

  Kind regards.

• Office Jet Pro 8620: No Assistant HP printer or Application icon

  I'm under 10 64-bit Windows and the Office Jet Pro 8620.  I can't configure my scan-to-email of the printer (continues to request a code).  My printer is connected via Wi - Fi, and otherwise works fine.   Following the instructions of support, I tried the Printer Wizard, but there is no such program listed in my HP folder and no printer the Office Assistant icon (although there used).

  I downloaded all the updates current and running Scan Doctor several times.  No luck.

  Any help is appreciated.  Thank youl.

  Hello, GreenTurtle,

  Thanks for the quick response.  I followed your instructions.  After disconnection of the wireless connection and then the wizard of wireless, all re-installed configuration correctly.  The appropriate icon appeared on the desktop and I was able to put everything in place.

  I am very grateful for the help and quick response!

• HP 6500 Office Jet has more: copy on a Hp all-in-one

  I was copying annual reports to plate (double-sided) yesterday and finished a 75 page run... no problems. Today, it won't print anything from my laptop or copy anything from the tray. Pages come out blank. Analysis of white light through the paper, but nothing is printing.

  Here there are steps that can help solve white troubleshooting printing on your Officejet 6500 has more.  Be sure to check the vents.  If the above does not resolve the problem, the message here can help.

• HP envy 15 t touch laptop: hp 6500 office jet has more

  Good evening

  I have a printer HP Officejet 6500 has more is not compatible with the windows will 8.1 mirosoft I have to buy a new computer

  HP Officejet 6500 a is compatible with Windows 8.1 and you can install the printer on your laptop touch of Envy 15 t. no need to buy a new computer, you must install the drivers in your laptop current at the bottom of the link and use your printer.
  http://support.HP.com/us-en/product/HP-OfficeJet-6500A-e-all-in-one-printer-series---E7/4083974/model/4083870/drivers

  See linkfor printer compatibility.

• HP wireless 6500 Office Jet won't a copy has been working fine until today.

  iMac operating system has nothing to do with it that I'm just trying to make a copy.

  Just changed ink now when the problem started. It won't always make a copy I just get a blank page.

  No changes of any kind.

  no error message.

  Thank you.

  I searched other posts and someone suggested that I go to settings on the front of the printer, and then Tools. I did a cleaning twice and now he makes copies again. The first time I did the cleaning, it still does not, it is the second done cleaning. I strongly suggest to HP that they solve this problem in their Troubleshooting docs. They mention not even make a copy, they speak only printing two diiferent questions.

• Office Jet 6500: Office jet 6500

  My printer stop working, I bought a new track and a charger.  Light to the plug, but whenever I press the power button it lights up for work a little while and then stop.

  It's upsetting that I spent so much money on new parts, only to discover that the printer is over.   Thank you for your help.

• Office Jet 2130: why isn't my Office Jet 2130 scanning in color, still print in color, (suddenly)?

  I just scanned a few photos in color and have the proper color settings, then I printed a few color photos and now I can't scan in color, yet can still print in color. All cartridges are full. What gives?

  Welcome to the HP Forums @DogenGenjo,

  I'd love to help you with your Deskjet 2130. I see from your description, you are able to print in color, but you can not scan in color longer. I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

  You said that your settings are correct, but I wonder if you try to change your preset scanning if it would work. You have the scan on scan document or scan photo? Can you also check the color scanning settings and let me know what it says?

  While I wait for you, let's run printing HP and Scan Doctor (PSDR) to see if he can help us identify and resolve the issue. You can download the PSDR since the following link: www.hp.com/go/tools

  Please let me know the result of your efforts and I will get back to you as soon as I can. Thanks, I can't wait to hear back on your part.

• Office jet pro 8500 a: elimination of printer, was this encrypted model? How to destroy the hard drive?

  This model encrypted?

  If this is not the case, how to destroy the hard drive? Where is the hard drive?

  Hi @Diane47,

  Thanks for joining the Forums of HP Support with your request to printer.

  I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer you plan to elimination and you wonder if the hard disk is encrypted and how to destroy the hard drive. I would like to help with that.

  HP Officejet Pro 8500 has e-all-in-one printer don't have a hard drive. It contains a very small amout of memory, so it can keep in memory the printer and fax settings.

  You can clear the memory by restyoring the printer back to the default values.

  1. on the printer Panel, select Setup.

  2. from the Configuration menu, select Tools.

  3. on the Tools menu, select Restore Factory Defaults.

  HP offers to recycle their products for you. If you want to know more about it, please click here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• 7612 HP Office Jet: given that 10 windows cannot print a3

  Since the upgrade to windaws 10 a3 size is not in the print menu

  Hello

  Thank you for using the forum.

  Could you download 10 Win printing software (we recommend that you download the full features software) of this link;

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/6879040#Z7_3054ICK0K8UDA0AQC11TA930C7

  After installation, you should be able to use the printer driver and print to your A3.

  Hope that helps.

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• OfficeJet 4500 G510n-z: HP Office Jet 4500 G510n-z fails to print over wireless network

  Hello

  Earlier my XP (Dell D620) machine stopped printing wireless with my officejet 4500 G510n-z. My Windows 7 D630 prints wirlessly without any problem. I have download the current HP drivers without result. I looked at other positions, but none of the viable solutions. The 4500 G510n-z appears as a printer, but all print jobs end with an error. I can't print a test page, Notepad, etc. All jobs appear on the queue, but they all error. It seems to be a specific problem of the XP. I have XP pro version 2002 Service pack 3. My network is just a Verizon Fios wireless router. In windows 7, I can see the actual address of the Hp wireless connection when the printer is added. Under Xp I do not see the address wireless when I try to add the printer. Now, it appears in the list of printers on XP but 7 seems to see the actual address wireless and allows me to select it to add the printer. I plugged the XP machine to the printer and it would work for a while then stops working. Don't know what triggers the loss of connection. How can I specify the connection 4500 G510n-z XP? I tried to add the IP address I see on my 7 machine but XP wants to a path of the server which is //server etc., UNC path.

  I went in the properties of the printer and changed the address to match the 7 IP 192.168.1.3 192.168.1.9 Windows 7 XP, but not go again.

  Thank you

  Al

  Hello @adb1779,

  Thanks for getting back to me on this subject. Because the ping tests on both computers is successful when communicating with your wireless printer, it turns out that you do not encounter a network issue at all. On the contrary, there is either a program of 'blocking' of printing wirelessly on your XP computer or computer XP is not "like" the fact that you have changed the IP address of 192.168.1.3 to 192.168.1.9. It would seem that your XP computer is a former connection with the printer. To resolve this problem, please follow the steps below.

  Step 1: Launch MSCONFIG:

  I'll have you temporarily disable all programs background on your XP system to see if there is a program that runs in the background on your Windows XP computer that would block communication with your printer.

  1. Click on the Start menu
  2. Click run. In the Run dialog box, type msconfig and click OK
  3. When the System Configuration window opens select 'Selective Startup ' and uncheck load startup items
  4. Click the Services tab, check the box at the bottom to hide all Microsoft Services
  5. Select disable all
  6. Select apply and OK
  7. Computer restart when prompted

  When your Windows XP computer turns please try printing. If the printer works correctly now it would mean that a program was blocking the communication. If the problem persists, proceed to the steps below.

  Step 2: Uninstall the drivers:

  I understand that you have already done this in the past without result. However, if your product is identified as on 192.168.1.3 she is not installed correctly, or an earlier version of the printer with an old IP isn't be properly removed from the system. It is crucial for the repairs we have a clean slate to work with. Please follow the steps below.

  1. Click on the Start menu
  2. Click on programs
  3. Select the HP folder
  4. Select your HP Officejet
  5. Select Uninstall
  6. Please follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 3: Clear the server properties:

  Your printer driver can also be installed under the print server properties. I'll have to make sure your driver has been completely removed from both print server.

  1. click on the Start menu

  2. Select Printers. You may need to go to the Control Panel then Printers and faxes.

  3. in printers and faxes click on file and select Server properties

  4. in the print server properties window, select the drivers tab

  5. If your HP Officejet is listed, click on it and select Remove downstairs.

  6. a new window opens, click on Remove only the driver. Click OK.

  

  7. Select apply and then OK in the print server properties window.

  8. close printers and fax machines.

  Step 4: Delete the temporary files:

  1. Click on the start menu
  2. Select run. In the Run dialog box, type %temp% , and then click OK
  3. Click on the Start menu
  4. When the Temp folder opens, Select the first item in the Temp folder and tap the SHIFT key on your keyboard.  Now Shift while, scroll down a few lines and click on another element in the file. What is between these two elements will highlight.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. If a Temp file be used yet that you will automatically get the pop-up that you can't delete this item. The "deletion" process is cancelled. On Windows Vista, 7 and 8 of Windows you can just "jump" from the items which will not delete. Unfortunately, on Windows XP, it is not so easy. Take note of this point is unable to delete. Then, ignore this element. Click on the next element in the list, hold the SHIFT key and click another item in the list to remove another piece of elements. You will continue this tedious step until all items in the Temp folder which will remove are deleted.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 5: Reinstall the drivers:

  1. Please click here to download the drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the instructions on the screen to reinstall your printer wireless
  4. Once your printer is properly reinstalled please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Office jet pro 8610: printhead issue when idle for a long time

  I live half the year in Florida and the other half in North Carolina. I have the same printer model in both places. On the advice of technical support from HP, I remove the ink cartridges and put them in a bag before I left for the season. I just returned to my house from the North and had a problem with the printer/ink. It was resolved by HP by sending me a new print head, because this printer is still under warranty. But the next time it won't. I try to learn if there is a better way to deal with the issue of a printer sitting inactive for six months. Must I also drop and the bag to the top of the print head? Should I just take the cartridges back with me, so they will be used frequently? Is there a reason to think about letting the printhead to sit empty for months would cause a problem? ANY advice would be welcome, because I've always had problems upon returning to a unused printer. TIA!

  Hey @sls2,

  I see that you are worried about having your printhead replaced on your e-all-in-one Officejet 8610 printers if they have any questions after you have not used for several months. I can answer for you.

  First of all, if the printer is no longer under warranty, they print head would not be replaced. It is a replaceable part, however you must buy the HP printhead if cartridges does not solve your problems. Here are some things that can be done:

  Let the printers power when they are not in use. If printers are turned on, the printers can do the maintenance to keep the cartridges and ink system to dry more quickly. This can save your print heads. Of course, this does not work if there is no power when you are away.

  Buy an extended warranty for printers. You can contact the HP Support by clicking here and filling out the form below and they can provide you with options of extended warranties and treat everything immediately. Please note that they will need serial number of the printer to record it all for you. You can also buy a warranty by visiting HP Shopping. When you follow this path, you will need to call the number included in the package of warranty and they will need serial number of the printer.  Whatever it is, the printer should work when you buy the warranty.

  Buy a HP Laserjet Printer. LaserJet printers use toner, which is a dry power rather than the wet ink. These printers may be left in storage for years, opened again and can always print. This would put an end to any concerns about the cartridges or the print heads. The disadvantages of these printers is that, unless you use a single black printer, the cost per page is superior for printing from the Officejet 8610. This path would make printing very expensive photographs, so this is something to be aware of the fi.

  Buy a printer with a system of two-ink cartridge. HP printers with two ink cartridge systems have print heads integrated cartridges instead of the printer. This means that if the cartridge doesn't work over the cartridge can be replaced instead.

  The downside of this is that your average cost per page to print would increase. You can compensate for this by subscribing to the printer for instant ink program and cancel your subscription until you change your location. You can learn more about the program by clicking on this link.

  Please let me know if that answers your question, or if it solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Office Jet 6000: cannot find how to print the test page with Office jet 6000

  I can't find in the properties of this printer HOW to print a test page. I was running out of ink black, and all color cartridges are rather recent and not on show at low levels. But, after replacing the black cartridge the first doc to test printed came out very uneven and unreadable.  There is no error message.  How in diagnostics on this printer to test the printing?  I tried not to print a doc of color (as photo) yet.

  Can I update the driver?  Help, please.

  Hello

  Test print page options under properties of the print driver for your device.

  But I don't think that solv your problem.

  You must print alignment and another test for correct print quality problems.

  Here is the HP site, gives detailed instructions form document.

  http://support.HP.com/us-en/product/HP-OfficeJet-6000-Printer-series---E6/3866939/model/3866950/document/c01708575/

  Good impression