7612 HP Office Jet: given that 10 windows cannot print a3

Similar Questions

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Can't seem to make updates, receives the message on my task bar that says windows cannot check the updates.

  Original title: updates

  I am running vista home top and I can't seem to make the updates I have a message on my task bar that says windows cannot check the updates...

  Hello

  Microsoft still provides updates of Windows security until April 2017, but only for Vista SP2

  This is what covers the Extended Support.

  https://support.Microsoft.com/en-AU/lifecycle#GP/lifePolicy

  ___________________________________________

  Check to see if both SPS is installed:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  See you soon.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• Office Jet pro 8610: Office Jet pro 8610 for windows server 2008 R2

  I got the new Office Jet pro 8610 prither but does not have the driver for "Windows Server 2008 R2 Enterprise" 64-Bit.

  What to do now. Can you please provide?

  Thanks in advance.

  Hello

  The same driver as expected for any operating system like Windows 7 or 8 must be used, however, the installation should be launched via the command line and not as a standard installation.

  Follow these steps to install the software of the printer on a server:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer/5367603/model/5367606/document/c03351547

  Shlomi

• My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

  I have a new HP Office Jet 6700 Premium

  It worked very well, wireless printing from my iPad.

  iPad displays a window that recognizes the printer, but it does not print.

  There is no error message.

  The steps below a usually resolve the problem you are experiencing:

  1. turn off the printer.

  2. completely turn off iOS devices (hold sleep and home buttons simultaneously until a message appears prompting you to "Slide to power off". Drag on this bar, and it should completely turned off).

  3. turn the printer on.

  4. switch on the devices iOS back.

  5 try printing again.

  These steps usually fix the problem. If they don't, try these additional steps:

  6. power cycle your router (usually done by unplugging the power cord from the router, wait 20 seconds and in him plugging back in).

  7. ensure that iOS devices and the printer are connected to the same network, and then try to print.

• Office Jet Pro 8620: No Assistant HP printer or Application icon

  I'm under 10 64-bit Windows and the Office Jet Pro 8620.  I can't configure my scan-to-email of the printer (continues to request a code).  My printer is connected via Wi - Fi, and otherwise works fine.   Following the instructions of support, I tried the Printer Wizard, but there is no such program listed in my HP folder and no printer the Office Assistant icon (although there used).

  I downloaded all the updates current and running Scan Doctor several times.  No luck.

  Any help is appreciated.  Thank youl.

  Hello, GreenTurtle,

  Thanks for the quick response.  I followed your instructions.  After disconnection of the wireless connection and then the wizard of wireless, all re-installed configuration correctly.  The appropriate icon appeared on the desktop and I was able to put everything in place.

  I am very grateful for the help and quick response!

• My 6500 Office jet suddenly began a squeal when printing.

  My 6500 Office jet suddenly began a squeal when the rolls of paper travel. It is there no printing errors and problems printing again. This printer should be lubricated maybe?

  Hello shudawg46,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I'm sorry to hear about the sound of squealing, your printer is doing when you print. I suggest you roller cleaning which generally contributes to this. Here is a guide with instructions that you will need to clean. Please do not consider the title of the document, I just want to show you the steps of cleaning.

  Check the Solution 2: clean the rolls of paper: Several Pages feeding through the printer

  Best wishes

• OfficeJet 6500 E709n: New portable 10 Windows cannot print on Officejet 6500 E709n

  Just bought a Dell Inspiron with Windows 64-bit 10.  Cannot do print on my Officejet 6500 E709n.

  * I can print to this printer even using another computer Dell laptop running Windows 7

  * I have installed and uninstalled the printer a couple of different

  1. With the help of the HP Officejet Full Feature software and driver http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-6500-All-in-One-Printer-series---E709/3...
  2. Using a detection printer 10 Windows "add a printer".

  The results are the same.

  • Never test pages print (no reaction from the printer at all)
  • Printing and scanning doctor detects the printer and all the controls are ok.  Test page does not work, but it will print an internal test page

  Another symptom, if I right click on the printer icon and select "Printer Preferences", I get a windows error window:

  "Address of the 0x5d4982eb function caused a protection fault.  (exception code 0 x 0000005)  Some or all property pages are not displayed. »

  Hi @jhrhilltop,

  Welcome to the Forums of HP Support! I read your post and see that you cannot print after you install the printer on Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  It does not resemble drivers for the printer installed correctly.

  Run all the updates of Windows on the computer.

  I would say to uninstall the printer software. Unlock the hidden administrator account, then install the printer on this account:

  Note: Do not connect the USB cable until you are prompted during the installation.
  Go to your Start menu and in the box "search programs and files", type CMD.
  CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  Then, close CMD and then restart your computer.
  When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  If your computer automatically connects to your account after reboot than to go to your Start menu, click the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  Under the administrator account, install the printer software.
  Test the printer.
  To disable the Admin account start at step 1 and type net user administrator / active: No..

  Test the printer.

  Please let me know the result and if there is anything else I can help you. Thank you.

• 7612 HP Office Jet: used print to my printer. I downloaded the new drivers, but they are stopped by koobface

  my printer worked with 10 Windows for a year. now, it will not be printed. I downloaded the drivers and they ae stopped by 'koobface '.  My state settings that the printer is "offline".  The settings say the default setting is 'incomplete due to a measured connection. "

  Hi @smjs

  You can install Antivirus software and run the scan to remove the virus

  Thank you.

• Office Jet Pro 8600: after Windows update, not the box tools or utilities 8.1

  Hi, I've updated my software to 8.1.  Had to do it by hand because it does not work automatically.  You have the printer to work, but I don't see the Toolbox or the utility Panel.  Not sure what you call him, but he gave me access to the computer to the printer, Scanner and Fax.  This has been so helpful.

  It seems that this could not be included in the update for win.8?  If this is the case, it will be one in the future?  I'm really bad without him.

  Thanks for any idea,

  Kristi

  Hi Kristi,

  To get the utilities ensure you have the latest version of the software installed.

  First, press the keys X and Windows Logo on your keyboard, and then click programs and features.

  Type HP ito the search bar, uninstall HP Officejet Pro 8600 base software of the device, if such exist, then clost programs and features dialog box.

  Then download and follow the tool below to reinstall the complete features with the printer Assistant software HP and any related utilties:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/PIW/&softwareitem=MP-122330-1

  Kind regards

  Shlomi

• Office jet pro 8600: 10 windows drivers

  I have a new ASUS laptop computer, running 10 windowes and the installation for my officejet pro 8600 disc don't suport windows 10 what I do

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series-N911/4322915/model/4323647#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Here are some relevant resources to help you in the analysis:

  Scanning multiple pages in PDF format

  HP Officejet Pro 8630

  https://goo.GL/29VJth

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  Hope that helps.

• Center solutions HP Office Jet Pro K5400 on Windows 7 Home Premium 64

  I am on Windows XP I had Solution Center HP that would allow me to see approach using ink and the balance of the ink in the cartridges. Is there a HP Solution Center, I can run on Windows 7 that will allow me to view rough use or balance of ink cartridges ink?

  Hi Rubber_Tree,

  I see by your post that you would like to know if there is a Solution from HP Software that you can run on Windows 7.
  I can help you with this problem.

  Windows 7 drivers are pre-installed Windows drivers. Unfortunately, there is not a full download software driver.

  I provided a download for the HP tools that are compatible with Windows 7, box that provides status information and maintenance on the printer. Toolbox HP. You can check.

  Good day!
  Thank you.

• HP Office Jet G85, new Dell, Windows 8 (and 8.1) - refusal to print

  My G85 will not print for the purchase of a new computer with Windows 8 (later upgraded to 8.1).

  It will display the pages with very little content, as controls.

  However, with something else, the printer will print an inch or two of a page and then goes to error mode, eject the page without printing.   It's almost as if it were a print problem only.

  I did the following:

  • Installed new drivers, including the former pilots of the purge
  • Run print HP and Scan Doctor with the following results:
  • -The first time that I run it, it invariably recognizes the printer but the program crashes during the screen "selected Communication with your product."
  • -After cancellation and re - run 'the doctor', it prints a page with
    GET /DevMgmt/DiscoveryTree.xml HTTO/1.1
    HOST:
    and then finish on the screen "Impression of difficulty".
  • -When you run the "difficulty printing" on the State of the device is gives an unknown error (06) error code.
    I did the printer reset several times without success.
    If I jump the device status screen, the rest of the tests get a green check mark.
  • -If I print a test page, I get variable results.  Sometimes it prints only a line or two from the text of the alphabet at the top, sometimes it prints in color or down bars, and once it appeared to print the entire test (about half a page long) page.
  • I called Dell and spent more than an hour with the tech, redo much of what I described above, with the same results.  The tech said that the printer is "broken".

  The printer was working (and worked) very well with my old computer with XP (fully updated). He has never worked with the new computer and win 8.

  Any help would be greatly appreciated.

  Thank you

  Hello WEBrewer & talw,

  I want to offer you both the information regarding this issue. You can try to perform a cycle power on your printer:

  1. Remove the power cord at the back of the printer while the printer is turned on.
  2. While the power cord is unplugged, press the power button for 20 seconds.
  3. Plug the power cord into the printer and the printer.
  4. Try printing again.

  There is not really much more troubleshooting beyond what you both have already done. All I can recommend is to download and run the HP printer install wizard for Windows. Beyond that, I recommend you to call our technical support to see if they have other options available. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  If you have any other questions, feel free to post back.

  Thank you.

• Mistakes CC Pro first weird given that the Windows 10 upgrade

  I just upgraded to Windows 10.

  Updated creative Cloud applications also.

  But there is a kind of audio problem.

  Videos with audio, does not play.

  Even if drag us an audio, it displays an error.

  So, all in all, its audio errors, Im getting.

  See the screenshots.

  

  

  

  I received this response from creative cow forums and tried, but still no sound is played first pro cc.

  I found a solution that worked for me. I used 6.0.1.7535 and necessary upgrade to 6.0.1.7541. I went on the link below and download the 64-bit version 2 of the high version 2.79 date 25/06/15. I had to reboot my computer twice in order to install, but it works fine now. I just had to return to the first-> preferences-> Audio hardware and to change the default output to speakers (Realtek High Definition Audio). Although it offers the possibility of Ms. for a reason any. Well.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&co nn = 3 & DownTypeID = 3 & GetDown = false