My A77 causes a lot of noise in the RAW (ARW) files.

Similar Questions

• A lot of noise in the raw in photoshop photos

  I recently updated my computer and Photoshop.  After having done that, I noticed all my pictures now load super grainy when I open to change.  Anyone know what I need to do to adjust settings to correct this?

  Set default ACR for the devices you are using.

• Audible, rattling noise during the selection of files in Windows Explorer

  I use MS Office 2010, and whenever I click on any folder, there is a barely perceptible sound, which wasn't there before and it's very annoying. I have not found a way to make disappear, but would like to do. This computer has been affected by a virus on a month and I was able to restore everything, but this sound is new, and I can't seem to find a way to stop. Any ideas?

  In Control Panel, go to the sound element, then the sounds tab.  Disable the sound "Select" element in selecting no sound for her.  That should solve your problem.

• noise in the Vref for pipeline ADC 14 bit

  I work with a pipeline of 14 bit ADC clock of 10 MHz. The total of entry is 4 Vp - p bonus.

  There seems to be a lot of noise in the VRef (about 50 mV swing noise) and tensions are given directly from feeding to the ADC.

  What are the ways to reduce this noise?

  Maybe not good advice. It is a pure analog circuit

  ... but what do you expect to answer if you do not give detailed information on the references used, ADC used, schematic and layout?

  However, to seek application of technology notes linear www.linear.com (look for those of Jim Williams!)   and texas Instr. TI.com

  Find a Council of analog circuits and post your question, some screenshots of scope, schema, and page layout, he...

• Re: My laptop makes a lot of noise

  Hi, my name is Akram, I come from the United States of America.

  I got this Toshiba laptop last year, I have all the details it s bought in the UK and sold in Saudi Arabia.
  Recently, since a month since my laptop makes a lot of noise can be the fan or the transformer.
  I'm a medical student, I t really know.

  The noise is so boring that I put t carry the laptop to the library or College. Everyone in my class knows once I have started using my laptop if I take it, irritated by all the comments made by my friends. I took the laptop for repair, somehow, I browsed your site and received your Toshiba repair depot.

  As I was in warranty until last week, I went to computer services of DATA VISION, 39th street, New York City, but to add to my problem the people he said he just cleaned up and said what he of done. But the problem is the same.

  I had to go again, then he said that all laptops Toshiba make these noises. Isn't annoying to know this?
  If it true s all Toshiba laptops make these noises, I beg you literally.

  Please, make not of the more portable, it s really annoying to know and just Fellows try to convince me.
  Nothing is managed best by Toshiba. I'm if unfortunate and disturbing why buy it.

  There is no management what so ever.
  Thanks I hope someone will never correct the problem, you can contact me on my mail id '[email protected] or [email protected] '.

  Hi mate

  Welcome to our community of small notebook

  Firstly if you are talking about a Toshiba laptop then you should post some details about your laptop. Who needs to know which model you have?

  Second, I don't know what sound you hear you noise which is create by module cooling fans?

  Just a comment in this regard:
  > As I was in warranty until last week, I went to computer services of DATA VISION, 39th street, new york city, but to add to my problem people there said he just cleaned and said its done. But the problem is the same. I had to go again, then he said that all laptops Toshiba make these noises.

  I put t know if it s your first computer laptop or not, but if you're talking about the noise created by the cooling fan, then you must know that you would hear on all laptops cooling fans!
  If the heat dissipation is higher, then the cooling modules must run faster and so the noise could be stronger. But you can also reduce noise if you define the CPU and modules cooling to a lower return. This may be down to the energy economy of Toshiba.

  I have had three different notebooks from Toshiba in the past. Now I have Satellite U400 and I'm happy. Of course, I can hear the fans running but that's nothing unusual.

• Qosmio F60 webcam picture having a lot of 'noise '.

  Qosmio F60.

  Exit photo webcam is nice to have a lot of 'noise', the situation is not clear.

  I reinstall several times but still does not work.

  Does anyone have the solution?

  Hello

  Did you remove the small protection in front of the webcam sheet?
  If Yes, then you should check the settings for the webcam.

  See this Toshiba document:
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

• Micro have a lot of noise on Satellite Pro U400-13O

  Hi there and Happy New 2009

  Toshiba Satellite Pro U400-13O, I bought a week ago and found out that the built-in microphone have a lot of noise when I talk via Skype for example.

  I tried changing the driver, but the problem still exists.

  What should do S? Any suggestions?

  Thanks in advance for your support

  CIKI

  BTW: I am running Vista

  Hello!

  In your case, I would check the settings in the control-online sounds and audio devices Panel
  Perhaps there is a misconfiguration or other.

  Good bye

• Tecra S3 produces a lot of noise!

  Hello

  I used a couple of Toshiba in recent years, but felt that the new Tecra S3 produces a lot to a lot of noise. This noise is generated by the fan. Even when running in the mode of dynamic switching, fan is on continuously, even after running idle for some time. The CPU temperature is 47.
  Is this normal for a laptop produced this noise a lot?

  FYI: The machine has already because the graphics card was vice, heat generation that makes more noise.

  Eddy Kleinjan

  Hello

  I put t think that it s a failure or malfunction of the equipment.
  It s a simple fact that the cooling module must run due to overheating problems.
  If the temperature rises to the fans works faster and louder
  However, you can try to change some settings in the power management. Please check this possibility

  Good bye

• Satellite C750-A103 made a lot of noise - problem with the cooling system

  My toshiba machine made a lot of noise... like a plane. And it gives me the message "a problem with your cooling system has been the detection.

  Turn off immediately and come back for the service "."
  What should I do? It has been recently formatted, also?

  + The message was edited: mode number + added

  You did not provide details on your laptop model and system that is installed on the laptop.

  Even his I don't know how old is the laptop, but according to this short message, it looks like there is a problem with the cooling system.

  Probably notebooks cooling fan doesn t work properly and the unit cannot be cooled as it should this can lead to cell damage through an internal temperature longer.

• A60 making a lot of noise

  Hi I have an equium A60 and the fan seems to make a lot of noise, other notebooks I've seen seem to be very calm while mine has a strong constant drone to it. I found some places that it could be dust or dirt in the fan or heater. Can I ask that is the problem? and if so how would sort it?

  Thank you, taf

  Hello

  On this way, no one can give you 100% precise answer, and we can only speculate. I'm don't know how old your unit but is perhaps time to clean.

  On this path, vents are clean and the device can catch its breath. If you use the appliance for some complicated process and CPU should work under pressure, it is normal that the unit must be cooled a lot faster to avoid damaging the material.

  Another thing: If you use the notebook as a desktop replacement you can put on something to make it a bit higher (maybe 2 or 3 cm). On this way the unit will be better cooled. Test it.

• Application has stopped working - dll files appear to maintain cause a lot of applications on my PC Vista crash

  For several weeks now I have experienced an error where my apps keep crashing, and I get an error message "Application stopped working" Windows.

  I use Vista Ulitimate, with service pack 2 now loaded. My PC is a strengthened high-level consumer GM5446E of Gateway with Duo Core processor and 8 GB of RAM. I use it for multimedia design (web and graphic work for the most part) and use Adobe Creative Suite 4 applications on a daily basis.

  I had a lot of problems in the past with this PC and even had to reinstall the operating system twice already. The second time I bought a retail copy with a 64-bit version of Vista to make the most of the processor.

  I spent about 6 hours on the phone with tech MS representatives this week already. Each of them tried the same thing - ran checkdisk, downloaded Malwarebyte Anti-malware and ran that (says there is no infections), and finally each of them says: I'll need to reinstall new OS. The second said he would not advise to initially because since I have service pack 2, it should be a complete reinstallation and since I have so much software loaded on my computer (thousands of dollars) it would not be a very good solution. But finally after trying everything, he says, it's the only option left.

  Details on my problem which he said, is that research on the history of reports on problems and Solutions (which contains a list of 36 progams with a total of 277 reports of errors (for most Application errors) stopped working, I was told that the culprit on each instance is a .dll file in the application that caused the error.

  The last agent suggested that the problem was caused by a virus that probably has already been removed from the computer, but had already corrupted .dll files. The problem I have with this explanation is that I was not able to run a virus scan since long before the beginning of this problem (because of Norton anti-virus is not responding on my machine) so how would the virus have been removed? If there is a virus that caused the corruption of the files .dll on my machine, I think he would still be here (which is apparently not the case as Malwarebytes found no infections).

  Does anyone have an experience with an issue like this that could confirm or deny the solutions suggested so far?

  Thank you.

  Hello

  Please, do not assume that the system is clean because the chances are that it is not.

  No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
  is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
  than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
  you are, of course, that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• The MID-7604 puts a lot of noise, where can I get cables isolated for it?

  I use a motor driver stepper MID-7604. I want to reduce the ground loop noise in the system that I'm able on my PXI-5152 (through a series of sensors, etc.) using an optical isolator or transformer for cable VHDCI 68 pin that connects the engine to the computer. Such a thing exist, or are there other methods to mitigate the noise? I'd rather have the computer connected to the same circuit and the MID-7604 / I don't really want to buy a gigantic isolation transformer/surge protector to plug into the MID-7604.

  bravedonxiote,

  PXI to the ground connection should be fine, so everything is referenced to the Earth.

  And Yes, grounding of the table is a good idea as well.

• LR seems to be to inject a LOT of noise (examples)

  Maybe someone can shed some light on this mystery for me

  I use PLR in my workflow - I just prefer how he treats the RAW files - so I put in with the interface

  I take an export in photo - process in DPP - like TIFF - import into LR - and then go crazy with all available editions (I have same Nik complete collection - LOVE)

  However, I noticed a HUGE amount of noise in the image after import into LR

  and I have a few examples...

  orig photo (I shoot RAW + JPG - here's the JPG - this is looking northward to PETCO park in san diego near the convention center Downtown--observing it under/through the sail bridge across harbor Dr. after sunset)

  

  treatment completed in DPP (zoomed in to 100%)

  

  ((I apologize for the GINORMOUS images but I don't think that noise, to which I refer would also easily visible in a smaller version of these pictures))

  opening of the TIFF (100% - same base area)

  

  and then how the same area appears in LR...

  

  link to the relevant together in flickr... here

  so... what happens here guys?

  'Why' lightroom seems to be inject noise reDONKulous amounts in a nearly pristine image?

  I * really * like lightroom - I like the interface and I love the nik plugins - but I can't have this much noise on every shot I take! I won't be able to use LR for "serious" photography if that's what I've learned to deal with

  'How' to configure LR to import my photos without noise?

  THX in advance

  > 'How' to configure LR to import my photos without noise?

  It seems that you apply a preset to the import or have a camera by default appied. There is a setting of clarity + 4 there that shouldn't be there. My guess is that there is also some sharpening applied. You must import the tiffs generated in another program entirely neutral, and they will be the same. In addition, I join Keith comment to convert raw in Lightroom itself. When you get the hang of it, you will get much better quality than the DPP.

• Bad noise in the shadows in ACR

  Hi guys,.

  Here's the problem I have.

  Until last week for conversions of RAW format, I was working with Digital Photo Professional of Canon (the software supplied with the camera). I have Canon 5 d. It was read RAW perfectly, giving a silent picture.

  Recently, I adopted all-Adobe workflow, so I use Bridge to visualization, cab for conversion and PS for editing. But the problem is the next. Bridge and after in ACR on perfectly lit photo where I have a dark tones and shadows (those not underexposed, simply correct dark tones and shadows) in ACR and bridge preview I see bad noise colorful, something you would see when artificially increase the brightness in the shadows. This is the default setting, without changing anything in ACR (or bridge) in a blink of an eye, it is not visible, but it is very sensitive when compared side-by-side with Canon Digital Photo Professional insight and overview ACR or bridge. And its also noticeable when you view the shot at 100% size. Of course everything I see in ACR is transferred to Photoshop. Well most of the time I can get rid of this noise in the PS, but it is still disturbing because I've not known just as with Digital Photo Professional.

  Could you guys please help me understand source of this noise, and how to get rid of. Thank you in advance.

  My monitor is HP 2445, calibrated. Software Photoshop and Bridge CS4.

  Pls give it a try with a lot less black. The shot is very clean, it works even with blacks = 0, but try it with 1 or 2. The default in ACR, 5, is brainless.

  Because of this change, you can adjust the brightness and contrast to your liking.

  Another question: the shot could be exposed 1 2/3 EV higher without clipping (but it wasn't underexposed in the sense that it would have caused excessive noise). I mention this only because you may not know, that ACR adds 0.25 EV "exposure" adjustment shots 5 d without displaying on the slider, thus creating the impression that the shot was exposed more high because it is in reality. (The setting is 0, 750 EV with 50 ISO, but never use with raw data, because it is simply overexposed ISO 100.)

  Gabor

• Satellite M40X - the noise of the fan

  Hi all.

  I have a Toshiba Satellite M40X - 161 (PSM4XE).

  I had this problem with the fan of the computer running all the time and make a lot of noise because I bought a few years ago.
  Once I had the fan cleaned in the shop of service it was ok for a few days, and then he started again.

  Is there a solution for this problem? I read that Toshiba has released new versions of BIOS that solve this problem, but for laptops with ATI/nVidia video cards.

  I have an Intel card. Is there something for my model, and someone has fixed this?

  Hello

  Is not a friend of the problem.

  The cooling modules must be cleaned periodically. It s not enough clean the fans only once the dust appears more if it s necessary to regularly clean the cooling modules.

  You should also take a look in the power of the Windows operating system options.
  Most of the time it possible s control of the CPU performance and cooling performance that would reduce noise and fan activity.