MY ACER LAPTOP 7551 DISPLAY BLACK COLOR. HE CHANGED TO RED, YELLOW OR GREEN.

Similar Questions

• I use the bridge for CS - 5.  How do the three buttons on the top left corner are color.  When at school, these three are RED, YELLOW and GREEN

  In class, they are colorful, but here at home, they are all gray.

  What version of mac os x are you using?

  It probably has to do with System Preferences > General > appearance Graphite value

  Try to set the appearance of Blue

• Black color of display problem turns red

  I have Hp G42, and has recently created a problem. all black color of my screen turn red colur. I have check the driver and updated also. no improvement.  splash screen also shows the red color. Difficult to deal with this problem. Please give me a solution.

  Hello vichuboy,

  I understand that the color is wrong on your screen.

  Connect an external monitor to the laptop and see if you experience the problem on the external monitor.

  I would like to know how everything goes.

• Emulator CVS displays bitmap color black and white images

  I use a VBAI2009 inspection on 1454 CVS which uses a camera firewire AVT Guppy F - 036C. This system is on a production machine inspect the product we make. VBAI uses the legacy IMAQ for IEEE 1394 on a CVS not the driver IMAQ-dx cameras. The VBAI script contains several steps function color inspection. To get the AVT camera to display the color, I had to install the files of MAX camera using the Bayer color tab because Bayer settings are not accessible from the driver on the CVS IMAQ. I'm no adjustment of the camera of the VBAI. This configuration works well and has worked for 6 months on the machine of production without any problem.

  Now, I need to edit the VBAI script but can't stop the machine to make the changes and test the program. I captured images bitmap using MAX during the inspection was installed 6 months ago and they stored on my host for just such an occasion. I am using these captured images and the CVS emulator in VBAI to make the changes to the program offline. I performed the inspection under the CVS emulator and the acquisition stage is configured to point to the captured bitmap images using the button Configure Simulation settings. The problem I have is that bitmaps are displayed as black & white in the emulator, even if these are images of color seen with paint. I can't find a way to fix this. Is - this problem as a result of using the parameters of Bayer to create the image color or something else in the emulator? The emulator, no installation of color image treats?

  Any help would be appreciated,

  Mark

  The stages of acquisition camera record video mode information used to acquire images. If you use these steps in emulation mode, it converts the type size and the image to match what has been gained for calibration and processing step use the same type of image. Looks like than the stage thought that the image was mono, even if you got it to be color. I will consider how it could have be saved incorrectly when you use the settings of Bayer. In the short term, you can disable the acquisition stage (don't delete so you do not lose the camera settings saved in step) and use a stage of acquisition of simulation or a new phase in the acquisition of 1394 and won't force the image size/type.

  Hope this helps,

  Brad

• Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

  Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

  Original title: VGA:

  In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

• Shakes the screen & display different colors opening lid

  HY, need help...

  I've had this laptop for 2 years and never had any problems, but a few days when I move the screen to open, adjust or close the screen shakes and display different colors.
  Is there something I can do or is the time to take for repair?

  Thank you

  Hello

  In my opinion it s definitely a hardware problem.
  Either there is something wrong with the connection or the screen itself.

  It seems that you have no experience in the laptop repair and so there is no sense in doing this.
  First of all, I doubt that you have all the tools to check what part is affected and then you could damage other parts while removing the procedure.

  So I think that you should get in touch with local laptop technician and should first try to know what's exactly wrong
  Then you can decide what you would then do

  I mean the screen is one of the expensive components for laptop and possibly it s not worth buying a new

• Acer laptop need help with keyboard

  Hello new community here. I need your guys help please. It comes to my Acer laptop is a 2 in 1.

  When I return to display completely, it gives me an option to switch to Tablet mode. I chose not

  because instead of actually use it as a Tablet im turn it over and place it on the screen just

  use the keyboard with my external monitor, but for some reason during his tours, he won't insert any

  entry keyboard at all when im using it. It's like a keyboard dead when I ' not in tablet mode, but.

  has returned all the way as a tablet. Hope you guys understand what im saying, otherwise I could make a short

  video I guess, in any case thank you in advance!

  -DjinnWraith

  Welcome, you by the way, don't give up; I sent a private message to him, then maybe you can join forces.

• Can we do a disassembly video or guide of the Acer Aspire V15 Nitro Black Edition?

  The laptop in question is the Acer Aspire V15 Nitro Black Edition VN7-591 G - 4 K 729V.

  There is literally no clear disassembly video which is in English and subtitled in English. As most of this community knows, the Acer Aspire V15 does not have a maintenance hatch, so you literally have to take off the keyboard as well as all of the top panel to make any kind of change.

  I want to replace the HDD with a SSD and most of the time I don't know where the slot for it, but it's all the other threads that worry me. Knowing what must be disconnected when you lift the keyboard and what belongs in knowing where is a nightmare. I'm not quite trust by opening, can someone make at least a step by step guide, with or without photos or at the most a video in English? Thank you.

  Philetus wrote:

  This type of connector you very gently pust both sides of the black bar the White side. Reinstall the cable, you must stand out as you reglissez the water in.

  

  What type of connector do you speak? These 3 connectors which are connected to the keyboard when you lift first open?

• When using gpu high performance my laptop screen goes black and white

  HP Touchsmart TM2-1010ea

  Windows 7 64 bit

  recently updated to AVG, nothing of other news.

  When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.

  Hello mcbethtings:

  Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.

  Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.

• How to format computer acer laptop?

  How to format computer acer laptop? Had only "backup" acer erecovery discs and no original cd of vista when I bought my laptop.

  My phone is updated with all microsoft updates before that. Problem occurs when I got the blue screen. I rebooted and then I had a black screen with blinking cursor after the "PRESS F2 TO enter SETUP". Downloaded the neosmart vista recovery disk but no help. Startup Repair does not work and I also tried "restore from a good starting point" to end up having the same screen with the cursor. "

  Recovery disc neosmart vista I tried to spend in the command prompt and run a virus cleaner and it detected TDSSMBR. SM as a virus in the partition c: and cleaned. After that I tried restarted and after the "PRESS F2 TO enter SETUP" had a black screen then "missing operating system".

  I tried using "neosmart vista recovery disc" and execute "Startup Repair" and it detected problems and that fixed it. Then restarted and even a black screen with "missing operating system".

  Then I got my "acer e-recovery of a disk" and reinstall to factory settings. I noticed that it is installed in 2 disc/directory partition.  Once this was done, I rebooted and got the same black screen "missing operating system".

  Then you can someone pls let me know how I format my computer acer laptop (detailed instructions please) as I am not very irritable of mind.  All I have is the "acer erecovery discs. Once I have the format that I can use the "acer erecovery discs' reinstall to factory setting? By the way, my laptop has 2 hard drives, or at least I think that it doesn't. C: and the other e: is there a way to check wherether I have 2 hard drives or only one. Vista has been on the c:
  Thank you

  How to format computer acer laptop? Had only "backup" acer erecovery discs and no original cd of vista when I bought my laptop.

  My phone is updated with all microsoft updates before that. Problem occurs when I got the blue screen. I rebooted and then I had a black screen with blinking cursor after the "PRESS F2 TO enter SETUP". Downloaded the neosmart vista recovery disk but no help. Startup Repair does not work and I also tried "restore from a good starting point" to end up having the same screen with the cursor. "

  Recovery disc neosmart vista I tried to spend in the command prompt and run a virus cleaner and it detected TDSSMBR. SM as a virus in the partition c: and cleaned. After that I tried restarted and after the "PRESS F2 TO enter SETUP" had a black screen then "missing operating system".

  I tried using "neosmart vista recovery disc" and execute "Startup Repair" and it detected problems and that fixed it. Then restarted and even a black screen with "missing operating system".

  Then I got my "acer e-recovery of a disk" and reinstall to factory settings. I noticed that it is installed in 2 disc/directory partition.  Once this was done, I rebooted and got the same black screen "missing operating system".

  Then you can someone pls let me know how I format my computer acer laptop (detailed instructions please) as I am not very irritable of mind.  All I have is the "acer erecovery discs. Once I have the format that I can use the "acer erecovery discs' reinstall to factory setting? By the way, my laptop has 2 hard drives, or at least I think that it doesn't. C: and the other e: is there a way to check wherether I have 2 hard drives or only one. Vista has been on the c:
  Thank you

  Hé neww

  NeoSmart disk is to startup etc repair not reinstall

  the process of acer administers the process of full recovery to the standards of the factory

  you start from the acer recovery disk to start a reinstallation of vista, back to factory standards and follow the prompts

  problem with the acer recovery process, you will need to contact acer

  It's their recovery process

  http://www.Acer.com/worldwide/support/index.htm

  Walter, the time zone traveller

• get a copy of Vista OEM or reinstall an ACER laptop.

  I have a situation, where I'd like to perform a recovery on an ACER laptop to restore factory settings, however I have no CD to go with it. I have a long history here, perhaps someone more familiar with laptops and Vista installation can suggest where to begin the search, or the place where process? I am VERY familiar with the repair of Windows 95, 98, 2000, and XP is installed on desktop computers, but you don't master with Vista. I also have little experience with laptops and am not sure if the laptop has a recovery partition which can restore the factory settings or if it's just a thing of emergency repair, as my investigation into what was wrong with the laptop was a little weird. I'll do a post that is a bit of a long story, but it should show my process of thought as well as my skill level. I spent

  A knowledge of my friends has recently undergone a crash of hard disk on his laptop computer, although he didn't know exactly what was the problem at the time. Fortunately there is nothing on the drive that does not saved except for the OS.

  At first glance, it appeared that the hard drive was bad, and he went out and bought a new laptop. Outings, I was informed about this and they asked if I wanted this one for parts or to try to fix it if I could.

  After receiving the laptop, I decided to check what was wrong. I tried to turn on immediately, before even to sort out the power cord, but nothing happened. He was dead. The laptop was unused for several days before being delivered to me. Thinking that was the problem, I have dispaired that I never changed a power supply in a laptop. However, for the heck of it, I plugged in the power cord and to my surprise, it started. This dead battery may be important later.

  He has been starting some sort of partition repair which gave me access to repair system I since lost access to. The thing was, when I got to the screen that says "System Recovery Options" with the "motor load' and 'next' boxes at the bottom, no OS installs were neither were all partitions.

  I got to the menu where it gave me options, with "command prompt" downstairs. I just assumed it was like the XP Recovery console and I tried to use it as such.

  They gave me a "X:\windows\system32" prompt, which I thought was weird, because it's the X drive instead of drive C. The people in question can barely use a computer, so they would not have reassigned the drive letter.

  I did dir c: and had an error on drive c. be corrupted. Also, I did a dir d: and get "file not found" that seemed weird. It turns out that the E drive was the dvd - rom, then I discovered. Other letters gave errors and invalid letters.

  I decided to start with the basics, and I used the command chkdsk on drives C and D. To my surprise, that seemed to do the trick, and after restart I was taken in the Welcome screen.

  Restart at first seemed to be a mistake, as I have since not managed to find a way to return to this menu of repair and subsequent attempts through the Vista Start menu (or whatever you call the menu that is displayed when hitting F8 these days.) Its name has changed between Windows 95 and xP) need the administrator password.

  I was to call back them and get the password from them, and I'd have to try to use one of the solutions 'password lost admin, cannot connect', I didn't know if it would be a good idea on a potentially damaged system of mud autour with registry hacks.

  At that time, it was late in the day and I had a few other things to do. I decided to start with Windows Defender antivirus scans and the tread Micro antivirus, that have been installed. He had a subscription to the microphone of the tread, so I connected the laptop to my programmer, updated definitions and performed a full scan.

  The two negative came scans, with the exception of a few tracking cookies. At this point, it was late and I was tiered, so I all stop and went to bed. I had disconnected the laptop to my switch and it sat in my bedroom next to the bed.

  Around 01:00 a.m., I was awakened by a strong and heard the WHIR of the laptop sounds beep. The computer had apparently turned on, but when I opened the file, the screen doesn't have to turn on. Think of some sort of virus or Trojan was at fault, since a disconnected laptop should be on NOT himself in the middle of the night, I hit the power button to turn it off, and he succeeded.

  In the morning, I tried to install malwarebytes and run a scan and it found several things he called Trojan horses, as well as some adware. I removed it.

  I have found it useful to keep on the laptop, and rather than to try to clean it up, I would like to reinstall from scratch.

  I looked on the internet and found that most Acer laptops should have their accessible restore partitions by pressing control-f10 or alt + f10.

  Here's the strange thing. I did, and it started working. However, I had a Windows XP startup screen and it says "Windows XP".

  The laptop is running Vista Home Premium, and there a House premium sticker product key OEM on the bottom. If the recovery partition installed XP and asks me a product key XP, I'm GROUND.

  I have an OEM copy of Vista, but it's for a 4200DX gateway. Somehow I doubt that it will help you for the upgrade of the Vista laptop. Any suggestions?

  Jumped the gun in the abandonment of the XP, need it install Vista?

  The laptop is an Acer Aspire 5570Z according to the engraving on the front.

  On the back it says:

  MFG. Date: 0706 Aspire 5570-2067

  Yes, suggestions? I could try to clean install, but it is probably better to start from scratch. On the other hand, have XP is probably a better choice, because the laptop has only 1 GB of RAM. Possibility to choose, I would choose XP on 7 or Vistafor this computer, but which leaves me with the problem of a product key.

  If the recovery partition is indeed a XP product key, is it possible that Microsoft would leave me to transfer the license from a dead Tower brand OEM copy of XP home to this laptop? I doubt that the key of this death dell sticker product could work on this laptop, but it would be worth it. I need a new key, and they could indicate the old key as invalid with Windows Genuine Advantage and refuse to turn it on.

  Suggest that call you Acer to see if they can make any sense out of it.

  Some restore partitions when launched as the emachines PC (I fixed in the last days) installed XP preactivated and no key was needed.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Black color copy?

  How can I copy black color to a black and white printer?  If I have blue ink and copy on the HP LaserJet M127, the blue come out and really light gray... How to get out as a black (and do not use a black pencil).

  Thank you

  Hi hookette,

  I tested the Laserjet M127 in our lab with blue and black ink.

  Blue ink was faded and black ink printed more dark.

  If you want to be able to copy in blue ink, go to the copy settings, select more clear/more dark to change to print more dark.

  When copying of different colors it will display as gray on any monochrome printer.

  Thanks for posting on the HP Forums.

  Have a great day!

• How can I disconinue sharing of any kind on my acer laptop for win 7/64 home premium?

  Original title: NO PARTICIPATION using win 7

  How can I disconinue sharing of any kind on my acer laptop for win 7/64 home premium?  I want to share anything with anyone.

  Hi rhagland,

  To prevent files or sharing folders do the following:

  (a) open computer management. To do this, click Start, then right click on computerand then click Manage.

  (b) if the user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click Yes.

  (c) in the console tree, click System Tools, click shared folders, and then click share.

  (d) in the Details pane, right-click on a shared folder and then click stop sharing (this option appears only if you started the computer management by using a member of the local Administrators group account).

  To stop sharing multiple files, press CTRL while clicking the file names, right-click one of the selected files and then click stop sharing. This removes access network shared files selected.

  
  See also: http://technet.microsoft.com/en-us/library/cc753475.aspx

  You can also check the following links for more information on sharing:

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
  

  http://Windows.Microsoft.com/en-us/Windows7/keep-specific-files-and-folders-from-being-shared-with-a-HomeGroup
  

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials#section_4

  Let us know what helps.

• I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  Display uppercase makes reading difficult.

  Have you checked the printer properties settings?

  It could also be due to a problem with ink cartridge

  Used HP diagnostics or printed the test page for HP?

  Its nothing to do with win7 the printer settings are taken from the printer to the driver

• What is the display screen color recommended for fine arts

  I need to send pictures of my works so, what color recommended for my screen?

  Each monitor will interpret according to local settings of RGB. LCD monitor displays colors in this way, by combination of red, green and blue LEDS (light emitting diodes). It is an additive color model in which Red, green and blue are added together in various ways to reproduce a wide range of colors.

  You have no control over other peoples screens settings

  Make it look good on your is the best you can do.

  If you want to print CMYK is a subtractive color model, used in color printing, which you have control of the finished product.