my bluetooth adapter cannot connect to PAN networs

Similar Questions

• Wireless network adapter cannot connect to the wireless network

  When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Loopback adapter cannot connect past "absorbing the network address.

  well, then I'll put up my loopback adapter (windows xp btw) and iI marketing my loopback adapter, it is like 'Local area connection 64' and it cannot go beyond "absorbing the network address"... and when I click on fix it just expires itsself. And so I am unable to use it...

  Help?

  Right-click on the adapter, and then click Properties.  On the property page click on (highlighted) Protocol Internet (TCP/IP) and then click the properties button and give an IP address to the card.

  John

• IPhone Bluetooth & (adapter Rocketfish) - extreme static?

  Installed the new usb bluetooth adapter. Connected iPhone 4S. But the kind of pain I got from work.  Worked fine for 3 days then began to get a ton of static electricity. Removed and installed a second new bluetooth adapter... exactly the same results? Help please.

  Hello

  I suggest you to post it on the forums iPhone because you have found the same problem with a different material

  https://discussions.Apple.com/community/iPhone

• Cannot connect my Sony Ericsson C905 with adapter Bluetooth Toshiba

  Hello!

  I just bought a Toshiba Bluetooth adapter v2.1 + EDR and I use Windows XP. I installed the driver as in the manual, but I have a problem with the connection between my Sony Ericsson C905 and bluetooth. Bluetooth detects the phone, but it cannot connect to it.

  What is the problem? :'(

  Find the solution here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50192&TSTART=0

• Cannot connect my cell phone to my computer via bluetooth

  Cannot connect my cell phone to my computer via bluetooth

  Cell phones are not supposed to be connected via Bluetooth to a computer.

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• Cannot connect iphone 6 JBL j46bt Bluetooth using Bluetooth headsets

  Cannot connect iphone to JBL Bluetooth headset j46bt 6. This morning the iPhone 'seen' the Bluetooth but could not pair. Now, it is not just to find the various. I tried now on the plu button still does not work. Help!

  Just hold the power button longer when you turn on the jbl j46bt helmet, until the led flashes blue and red. After that you should be able to connect to your phone.

• Just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without certificate

  wireless problem

  just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without a certificate, any siggestions would be welcome

  Tom

  Hello, Bill Bates,.

  I would say to contact support with their router blank:
  https://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=1&VM_CUSTOMER_TYPE=&cmd=ESCALATION_REQUEST

• Bluetooth on Windows 7, not work cannot connect to the Palm Smartphone

  I have a HP Pavilion running Windows 7. I have a bluetooth adapter, but couldn't connect.  Diagnosis is specific to the device but unable to connect to my Palm Smartphone.

  Thanks in advance

  Hello

  1 is the Bluetooth device built into the machine, or you use a dongle to connect to the Bluetooth device?

  You must have the drivers or firmware upgrades installed that are provided by the manufacturer for each device you want to connect. But before moving on to which you can check if you need to make your computer discoverable to Bluetooth devices, or set Windows to alert you when a new device is trying to connect to your computer. To do this, you need to control how your computer pairs with (connects to) Bluetooth devices.

  Method 1: To control how your computer pairs with Bluetooth - devices

  (a) open the control panel by clicking the Start button, then Control Panel.

  (b) in the control panel search box, type Bluetooth, and then click Change Bluetooth settings.

  (c) in the Bluetooth settings dialog box, click the Options tab and do one of the following:

  Pour rendre make your computer discoverable to Bluetooth devices, select the check box for Allow Bluetooth devices to find this computer.

  When a computer active Bluetooth device is in discoverable mode, it broadcasts a wireless signal that allows it to be detected by other Bluetooth compatible computers or devices. This is sometimes called pairing mode.

  Warning - to help protect your computer against someone access it without your permission, only to make your computer discoverable when you want a Bluetooth device to find your computer. Disable discovery when you no longer need.

  (d) to allow Bluetooth devices to connect to your computer, select the check box for Allow Bluetooth to connect to this computer devices.

  (e) to be notified when a Bluetooth device is trying to connect to your computer, check the box for warn me when a new Bluetooth device wants to connect.

  You can also check the links provided below and check if the steps help you connect correctly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  I hope this helps.

• [HELP] Bluetooth adapter internal "not connected" according to Windows

  Hi, so I have installed the Toshiba bluetooth stack a few days ago to try to get a more reliable connection for my bluetooth devices, and it didn't really work properly. He could ' t find my internal bluetooth adapter. So I uninstalled it and now my computer thinks that I don't have an internal bluetooth adapter. Windows prompted me to reinstall bluetooth drivers. When I did he could not complete the installation because he says 'if please, plug the bluetooth device and click the ok button.

  The bluetooth radio no longer appears in the Device Manager either. Any ideas?

  In addition, a new device listed as SM Bus Controller appeared in Device Manager that has very little info and no drivers.

  The specs of my computer are

  Model: BA68 - 05408-A

  OS: Windows 7 Professional (x 64) with Service Pack 1

  Processor: Intel Core i7-3615QM

  Thanks for any help

  Hey jester,

  Usually this problem is caused because of compatibility issues. I would like to know some information about this problem so that we can help you further.

  1. What is the number of brand and model of the computer? (When checked with the model number, I couldn't find a Samsung computer.)

  2. is it works much earlier?

  3. were you able to install the drivers successfully?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try downloading and installing Bluetooth drivers in compatibility mode and check if the problem persists.

  Make the programs more compatible with this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Please reply with the status of the issue, so that we can better help you.

• my Bluetooth cannot connect to my shoqbox

  connection come with a pop-up alert indicating that "Audio driver is not available, please make sure that the audio device works properly.

  Edit:

  Re: my Bluetooth cannot connect to my shoqbox
  Thanks for the reply. tried the methods you suggested but no luck. The pop alert is that when I try to connect my Philips Shoqbox Bluetooth speakers to my laptop. on its own my phone have no problem with the sound, it works very well. Just to tell you in my page of my Shoqbox Bluetooth device is associated.

  		Re: my Bluetooth cannot connect to my shoqbox SEE SLIDE SHOW DOWNLOAD THE SET This album has 3 photos and will be available on SkyDrive until 07/07/2013.

   

  Hello

  As the problem seems to occur only when you connect the Philips Shoqbox Bluetooth speaker to your laptop if you may need to install a driver for the same that is missing or a utility.

  Contact Philips support so that they could help you with this problem.

  http://www.USA.Philips.com/c/audio-system/black-8W-sb7200_37/PRD/en/;JSESSIONID=1D21084BD91239AF8C44EFC0204D96E9.app121-drp2?t=support

  It will be useful.

• My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

  Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

  I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

  I forgot since when this problem persists.

  Please help me with this problem of internet connection,

  List of maybe / don't may not be the problem:

  1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

  2. my windows is still 8.0

  3 ASUS N56V

  4. browser chrome incognito window

  Thank you Mr President, I found a solution for this problem

  I just turn on the download via connections counters my PC-> devices config->download via connections counters

  and then I tried to enter the following command at the command prompt run as administrator

  netsh int ip reset c:\resetlog.txt

  I hope this helps anyone else having the same problem as mine

  Thank you again Sir

• Pavilion 1009TX M6: Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n cannot connect to Wi - Fi

  Hi all

  I have this laptop from HP Pavilion M6 1009tx. Since I bought it 3 years ago, I was faced with the question of the laptop will not connect to my WiFi automatically when I turn it on. It happens that 7 of the 10 times I would say. Sometimes it connects all rite away but above all he does not connect even if I try to connect to the available network manually.

  I then try to reboot several times as well as to try to connect to the WiFi manually, if I'm lucky it will connect, otherwise I have to keep restarting. The adapter doesnot connect even when I disable and enable (Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n).

  In the year of punch he used to connect whenever I plugged it manually, but now I try several times for sure.

  Any help would be appreciated.

  Concerning

  Hi @NSIDHU ,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook m6-1009tx and falling wireless signal. I would change the channel on the router. Routers are able to communicate to your laptop on several different channels, and sometimes it helps.

  You could disable IPv6 for the laptop. Some say this helps. Restart the computer after trying this.

  Solve this problem Microsoft Fix it 50413.

  Here is a linkto help as well.

  Please let me know how it goes.

  Thank you.

• connect the bluetooth adapter

  I try to install Targus USB Bluetooth Adapter and will have questions. Defrost not recognized. I have xp pro sp3. Istalled Bluetooth enumerator BUS and updated driver. I installed the software and driver from Targus and it is not recognized when I click on broadcom bluetooth usb. a single icon in the status bar and turns blue white when click Broadcom but red when you click Bluetooth Bus Enumerator. Can not find the device?

  Help please

  http://www.Targus.com/us/downloads/ACB20_UG.PDF hope this helps, Gerry Cornell