My camera does not work properly

Similar Questions

• Web on Satellite P200 camera does not work properly

  Dear Sir.

  I have Toshiba Satellite P200-144 and I have problem with my web cam.

  Although the software works properly, the error code "Please turn on the camera.
  I removed and downloaded the program, but could not able to the camera. Can you help me to do so.

  Kind regards

  Omer

  I also have this problem. You can temporarily cure by going to Device Manager and update the driver for the webcam (perhaps automatically, I always choose manual and then choose video Chicony USB 2.0 or USB webcam device). Don't forget to restart.

  I say temporarily because I find that after another reboot, the camera will stop working again. I would like to know if you have this problem too.

• Satellite M645-S4050: built in camera is not working properly

  My built in camera does not work properly.
  It doesn't have any kind of effect and it captures the images and videos as though a kind of thermal camera is performed.

  Also a few videos that I upload to youtube like this.
  I did research on a response, but can't find it, please help me.

  Hello

  You have this problem only play recorded videos or don't get it to play ANY movie?

  Have you tried a new installation or update of the graphics driver?

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Mat * one years (uj-840) DVD player does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
  Check it out!

• Web Cam does not work on my Satellite Pro C850-10 t

  Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

  What should I do?
  Thanks in advance :D

  Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
  Webcam is entered correctly in the Device Manager?

• Toshiba common modules does not work properly

  Whenever I connect to the laptop, I get a message: Tfncky: Toshiba common modules does not work properly.

  Anyone know what this means?
  I wonder if that has something to do with my windows media player does not properly. If I open the application, it is not to maximize the screen shows the taskbar
  Finally, it simply says "not responding" and I have to close the application. Tried to remove and reload that a new copy of WMP but it does not help.

  I don't know what laptop mode you but the first thing to do is to reinstall the Toshiba common modules.
  Please visit Toshiba support and download page under http://eu.computers.toshiba-europe.com go to the download section, choose your phone model and download common modules.

  Please let us know if everything works well again.

• Keyboard does not work properly

  Hello

  I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.

  When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?

  Thank you very much

  Tom

  Hi Tom

  Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
  Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.

  I think the keyboard needs to be replaced to check if only this part is affected