my cd player is unable to register but can play only.why?

I can't take back up on top of the cd player, but it only reads.

95% of all cdrom, cdrw, dvd, etc., have an update of the firmware. Visit the web site of cd mfg, have

you model # & check for a... Also, maybe try to move it to another IDE connection, xp

It reinstall it at startup.

Tags: Windows

Similar Questions

  • The update wants to do a net framework 1.1 SP1 on Windows XP, Vista and windows server 2008 x 86. KB2656353 but can not. Why not?

    The update wants to do a net framework 1.1 sp1 on Windows xp, vista and windows swrver 2008 x 86 (KB2656353), but can not.  Why not?  He simply has it again and again without updating.

    I finally got by a 'person' and he took over the computer.  It took almost 2 hours, but he finally managed to fix the problem and get the update installed.  Hooray!

  • Player window is a game, but can not hear here

    I try to play music from cd into the drive of the window, it plays, but can here no noise at all.

    Hello

    Thank you for contacting Microsoft Answers.

    Go to start-> type "change the settings of the sound card" and press enter-> in the dialog box, on the palyback tab, make sure that you select the right playback-> click device right on-> click on "Set as default device"-> click apply and then click Ok.

    Now, if you start playing music in Windows Media Player, you should hear him.

    If the error persists, come in here.

  • DVD player does not read DVDs but reads CDs only.

    my hp compaq 420 core2 duo dvd player does not read DVDs but only reads the CD. How can I fix this, please help me with the correct answer.

    It will probably replace the drive. There is more than one laser in there: one for each function. You can go bad without the other goes wrong.

    608141 001

    Above is the part number for the DVD burner. I couldn't find one on eBay.  In here is a online:

    http://www.mydvddrives.com/replacement-for-HP-Compaq-608141-001-SATA-CD-DVDRW-DVD-RAM-drive-burner-LightScribe-52029

    Replacement is easy. Remove one screw on the bottom and drag the old hunt and replace it with the new drive.

  • SX20 Quick Set registered but can not make calls

    We have several new SX20 units, two of which I installed and registered via SIP with UCM (v8.6.2, required a pack of devices).  I can make a call to the SX20 since a regular IP phone (7961 - SCCP), answering the call to unity of telepresence and continue a conversation only one voice.  However what composition of the SX20 the other SX20 or any other IP phone it briefly displays "call for binding", then it goes immediately to the "call was disconnected.  I tried just the DN 4-digit, as well as the SIP URI of numbering.  Here is a part of the log output of command line for the sx20 indicating the call SIP is rejected with a 403 forbidden message.

    It is worth noting that before these devices, we have had no recorded via SIP, SCCP phone only.  At this point, these devices don't need to dial outside of our network.  I had a case open for two weeks and keep TAC is passed between the teams of telepresence and the AAU.  I told them we have never had a SIP device registered with our University Complutense of MADRID before and if there is nothing else to be configured, the answer was nothing more for internal calls only.  I'm trying to get escalated now, but thought I'd give forums a go.  Any help is greatly appreciated, and I apologize if this question is that something is ridiculously simple.

    63018.74 DATACTRL I: DataGateCfgReq(ig=7) hdlc = yes

    63018.76 i: SipStack (ui = 8, s = 0) SipDialog sendInviteRejToStack (403: Forbidden)

    63018.76 msg unknown MC W: Mcfsm::handleOtherMessages() SIP_DialogFreed_Ind of SipStack

    63018.77 SipCall I: sip_call_handler::handleSIPMCallRej(8/0/-1): Appeal dismissed (cause: forbidden)

    63018.78 I: MC signalLocalReceiveCapsetChange, RemoteParticipant::signalLRCap

    63018.78 I: SipCall = appId = 8 makeOutgoingUpdate, stackId =-1, eventCookie = 1, isEmptyCap = 0, holdState = 0

    63018.74 DATACTRL I: DataGateCfgReq(ig=7) hdlc = yes

    63018.76 i: SipStack (ui = 8, s = 0) SipDialog sendInviteRejToStack (403: Forbidden)

    63018.76 msg unknown MC W: Mcfsm::handleOtherMessages() SIP_DialogFreed_Ind of SipStack

    63018.77 SipCall I: sip_call_handler::handleSIPMCallRej(8/0/-1): Appeal dismissed (cause: forbidden)

    63018.78 I: MC signalLocalReceiveCapsetChange, RemoteParticipant::signalLRCap

    63018.78 I: SipCall = appId = 8 makeOutgoingUpdate, stackId =-1, eventCookie = 1, isEmptyCap = 0, holdState = 0

    -JW

    A look at the logs on your case - looks like there is no number to call in the header AMATURES or Contact, so CUCM rejects the appeal and sends the 403 forbidden.  Note the field 'From' below - should be sip:[email protected] / * /.  What you configured as your SIP URI in your SX20?  Not that familiar with the SX20, but on my EX90 in the laboratory, there is a field of a SIP URI for that I had to enter the DN @ address >.  Anything on CUCM that would block the DN to be passed to the SX call to IP phone?

    primaryDN = 1070, cannot be called DN to determine the media... sending 403

    SIP/2.0 403 forbidden

    Via: SIP/2.0/TCP XX. XX. XX. XX:5060; direction = z9hG4bK8664f3a10726dfcdd3f6437593e431b6.1; rport

    From: "1070" tag = 123835963de850ed

    In: [email protected] / * />; tag = 1701792190

    Date: Thu, 14 June 2012 16:56:46 GMT

    Call ID:

    [email protected] / * /.

    CSeq: INVITE 100

    Allow-events: presence

    WARNING: 399 CM2 "unknown caller DN.

    Content-Length: 0 SIP/2.0 403 forbidden
    Via: SIP/2.0/TCP XX. XX. XX. XX:5060; direction = z9hG4bK8664f3a10726dfcdd3f6437593e431b6.1; rport
    From: "1070" tag = 123835963de850ed
    In: [email protected] / * />; tag = 1701792190
    Date: Thu, 14 June 2012 16:56:46 GMT
    Call ID: [email protected] / * /

    CSeq: INVITE 100
    Allow-events: presence
    WARNING: 399 CM2 "unknown caller DN.
    Content-Length: 0

  • DVD Player cannot read the DVDs (but can read busy DVD)

    Hello

    I have Hp Pavilion dv6-6140us, a 64-bit engine and is running windows 7... I wanted to burn the iso of windows 8, but my dvd player is not able to read blank dvd, but it can read the non-empty disc and can also play movies... Please help... want to try to win 8 preview release

    Hello

    Follow these steps to reinstall the Beats Audio interface.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are done, reboot the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

    Kind regards

    DP - K

  • DVD-RW/CD-RW Combo does not read DVD but can play CD

    I used to have Windows XP on my laptop. I then decided to do a fresh install of Vista. Since I've upgraded to Vista, I put a DVD, then it asks me to "Please insert the disc in drive E". I have the latest firmware and have obtained the Windows drivers.

    I really need my DVD player so I can watch movies on a holiday. Any help appreciated

    Hello!

    The sound of it, looks like a hardware problem but on the other hand as you say that the problem has occurred after that you installed Vista. For this, there are very less reasons. but you can try the following, if it works.

    1. go in Device Manager, click on the dvd/cd rom drives and do a right-click of your player, click on uninstall and then you restart. The reader will be installed again when you restart. get a disc cleaner for dvd lens and clean you drive with it.

    If the first did not help

    2. If you can do it yourself its good else take your laptop to a Mech and tell him to remove the drive and start the computer. then stop it and install the drive into the slot, tighten the screw and start your computer. This could help.

    on the other

    3. check if you insert a dvd does show all of the data at all? If another player gains a firend or ask Mech. install another drive and check it works.

    Concerning

    Microsoft-Most-Valuable-Professional, blog at: http://www.thecomputernext.com

  • Satellite A200 PSAFCA-01H00J upgraded to 4 GB of RAM but can see only 3 GB

    Hello

    * UPGRADE RAM PROBLEMS *.

    I just upgraded my laptop from 2 GB to 4 GB of RAM, * but cannot access the 3 GB *.
    I checked all the documents, and he indicates that the laptop should be expandable to 4 GB of RAM.

    Oddly enough, the site of [mytoshiba.com.au | http://mytoshiba.com.au] does not list my exact model under "abandoned" (as if it never existed!). Although there are a number of similar models according to [http://www.mytoshiba.com.au/web/resource/pdf/discontinued-models/notebooks/satellite/satellite_a200_psafca-01k00j.pdf]

    _OTHER WINDOWS7 64 BIT PROBLEMS_

    I also added a larger HARD drive (the original HARD drive wasn't @ ~ 19 months-) as well as a fresh install of Win7 Ultimate (64-bit).

    I have the Toshiba site and updated 64-bit drivers as much as possible, including the BIOS to Mw10M520.ROM using winphlash64 downloaded on the net, the included winphlash (32 bit) of toshiba did not work as I have already installed Win7 (64).

    Incidentally, I always have problems with "Toshiba Password Utility monitoring" and the software "Driver Bluetooth software" provided by Toshiba to [http://www.mytoshiba.com.au/support/notebooks/satellite/a200/psafca-01h00j/download] - in the absence of "* Win7 64 * ' drivers I used the ' * Vista 64 *" drivers. Is this a problem?

    According to my system info:
    My Chipset is * chipsets Intel® 945 Express Chipset Family *.
    My CPU is * Intel(R) Core (TM) 2 CPU T7400 @ 2.16 GHz 2.16Ghz*
    Installed memory is * 4.00 GB (3.00 GB usable) *.
    System type is * 64-bit OS *.

    What Miss me here people? Help please :|

    Hi mate

    Please check this page of specification Intel chipsets Intel® 945 Express Chipset Support function
    http://www.Intel.com/assets/PDF/datasheet/309219.PDF

    + _1.4.2 system memory account Support_
    + Takes in charge single-channel DDR2 SDRAM only.
    + Memory maximum support 2 GB +.
    + Channel memory Topologies taken in charge: +.
    + Single channel with 1 single SO-DIMM (up to 1 GB) +.
    + Single channel with 1 SO-DIMM (up to 1 GB) and down (up to 1 GB) of memory.
    + Support for DDR2 400 MHz and 533 MHz +.

    As you can see, the Chipset Mobile Intel 945 Express charge max 2 GB of RAM. This means that 4 GB of RAM would not be taken in charge and this is perhaps the reason why only 3 GB of RAM are visible

  • Cannot open iTunes Store, but can play music in iTunes

    iTunes opens normally. Plays music from my library without any problem. Access radio stations and 'my account' with no problems BUT the iTunes Store will be open.

    This is true for my account and my wife. I can access iTunes and the iTunes Store without problems on other machines.

    I started by reinstalling iTunes without result - and again with "revo uninstaller - clean the registry with CCleaner. No change
    Disabled the firewall, but no difference.
    Windows open in Mode safe mode (with networking) with everything accept turned off Apple programs. No luck.
    Ran sfc/scannow - no problem.
    Trouble Shooting compatibility - fair States "iTunes is incompatible" with no solution.
    I tried iTunes support but is too slow
    Tried to "Just Ask", who tried to solve it, but without success.
    Has anyone out there had this problem.
     

    Hi David, 65.

    This looks like a problem with iTunes itself. You must follow with the help of iTunes for better assistance.

    http://www.Apple.com/support/

  • Tried to uninstall Norton360 but can not. Why not? I used the uninstall feature on my cntrl panl.

    I downloaded A Norton360, Web anti-virus & security Protection program and tried to uninstall A Mcafee Security Protection. The problem I'm haaving is while I tried to uninstall the Mcafee pgm will 72hrs. ; It seems that Mcafee will not my Windows 7 uninstall. If anyone can help?

    Ask McAffee or see here support the site, there will be a uninstall tool.

    http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS101331

    Mind you if you have installed another security program before uninstall the origonal, both facilities are probably screwed. It's the Norton removal tool

    https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=kb20080710133834EN_EndUserProfile_en_us&product=home&PVID=f-home&version=1&LG=en&CT=us

  • Class not registered. MovieMaker error message. Also clip-player shake trying to start, but never does. Is - this memory?

    Always 'class not registered' is the answer to why MovieMaker cannot import as many files. I finally realized that if I have all the "Windows"associated files with QuickTime (which I do often because QuickTime Pro has been my editor that works, but I wish you MovieMaker to work because he has a different user interface that doesn't have a QuickTime Pro and it also looks like a very good program)

    Well of course MovieMaker will say that he has not "registered class. But then I associate any Windows, and I use Windows Media Player on Windows media files (it is a ball game all nother as to why PhotoStory3 will not identify ANYTHING either import in Windows Media Player and its unbearable playlists because (sorry but really... Windows how much a control freak should we be?)) Windows Media Player is a great product but the playlists and psycho how they are and how they control much else if you don't have them good... I want to say that I classify even not my media as Playlists insist!  He drives me crazy that they will sort not even by directory!  OK OK... Sorry... but these are really statements and probably a reason why people eventually switch to Mac. Windows Media Player wants to control how PhotoStory3 works and opens to your media... he wants to sort that you want to associate with it in a way that is so incredibly frustrating and it moves all the time, so that you don't know what's left in an archive it seems always continually come up with... UGH)

    Yes, back to Movie Maker. Sorry... but it turns out that Movie Maker also does not seem to recognize any "class" of files that it needs to import easily. My WMV files and *.wma and.. *.avi. but he says: "class not registered". And believe me, that I am registered in each file that appears to be a DLL "library", which I guess MovieMaker can make reference. I'm out of my element when it comes to talk about these 'libraries' and controls, but I signed repeatedly 5 main DLLs in Movie Maker as well as the outside System32 DLL which seem to have an impact on it.

    I have trouble while registering the 3 final files into MovieMaker that all look the same. I keep holding out that maybe this will be the trick to get MovieMaker to work. At LEAST for the mounting clip player to operate. Does anyone know where this video player is native of...... It is also associated with Windows Media Player. And as I'm probably suspect... what I find the most space on my computer or go buy more memory (there is no place to install more unless I probably get a new computer) to get this video player to work.

    So the *.dlls 3 in MovieMaker can't register are:

    C:\WINDOWS\system32\regsvr32.exe C:\Program Movie Maker\wmm2eres.dll
    C:\WINDOWS\system32\regsvr32.exe C:\Program Movie Maker\wmm2res2.dll
    C:\Program Movie Maker\wmm2res.dll C:\WINDOWS\system32\regsvr32.exe

    AND that's just ONE of the many ways that I tried to save them. But they come with a 'success'

    And finally the codecs associated with MovieMaker. I even went into this program identification codec under DirectX diagnosis... "Softella Filter Manager" or something like that... and I poured through it and find all instances of the MovieMaker filter DLL and I have reUpped its relevance in each case his link with some codec. I don't know exactly what I'm saying here but in the list of codecs and filters... so many things related or listed with the MovieMaker wmm2filt.dll - they were designated never "use".  And I clicked on them which has arisen again. All that that means I don't know but I thought she would at least give feedback in the program and tell him... It is used.

    Sorry for my long rant. I obviously do not include programming that much, but I tour and research about and I was out with these two programs (Windows MovieMaker 2.1 and 3.1 PhotoStory) for a month or more... trying to make them work.

    Any tips would be appreciated if you bother to do so through my rants.
    Thank you

    Hello Brianeclus,

    Thank you for your message.  With regard to the registration of the dll in your system.  Please, try the method explained in the link below.
    Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Player is unable to extract one or more tracks from the CD.

    I also got this message "Windows Media Player is unable to extract one or more tracks from the CD" pop up in an attempt to 'Copy' the CD!  I have Windows 7 and had NO problem for several weeks, ripping my music from CD sales in my MUSIC folder.  I got all "parameters" laid so that whenever I inserted a new CD he automatically pulled and then ejected.  I had NOT brought any changes to settings but for some reason all of a sudden it doesn't work anymore?

    I have trried restart, check all the parameters according to your advice making SURE that all the files of 'Target' were correct (they are), but all that happens is a few seconds after I insert a CD it gives me this message (Windows Media Player cannot extract one or more tracks from the CD.) and then the CD will eject with NO of TEAR that occur?  It's VERY frustrating!  There, can anyone help?  Please?  I have NO idea where to check then!

    Hi Jetlag40,
     
    Follow the steps mentioned in the reference link below and check if it works.
     
    Thank you, and in what concerns:
    Shalini Surana - Microsoft technical support.
    Visit our Microsoft answers feedback Forumand let us know what you think.
     

  • Commissioning the message 'unable to register the dll/ocx regsvr32 failed with exit code 0 x 3 c:\windows\system32\mscomct2.ocx.

    I started my PC in win7 Pro 64 bit, and I got the error message that says:

    c:\windows\system32\mscomct2.ocx

    Unable to register the dll/ocx: regsvr32 failed with exit code 0 x 3

    I have not installed any software recently.

    I clicked 'OK' and then got this error:

    c:\windows\system32\msmapi32.ocx

    Unable to register the dll/ocx: regsvr32 failed with exit code 0 x 3

    All the help to identify root causes and resolve this situation?

    Thank you

    I have no idea what happened, but after restart PC message did not appear again

  • Get the error message saying that Windows Media Player is unable to extract one or more tracks of CD

    Hi, I'm trying to copy a few tracks from a cd, but the computer rejects the cd saying that windows media player is unable to extract one or more tracks of cd.

    Hello

    Welcome to the Microsoft Community and forums thanks for posting the question. According to the description, you get an error message "theWindows Media Player can not extract one or more tracks of CD". We will analyze and identify the cause of the problem.

    Method 1:


    You can run the fix provided in the link and check out them.

    Solve the problems of Windows Media Player video and other media or library
    http://support.Microsoft.com/mats/windows_media_player_diagnostic/


    Method 2:
    You can also try the steps and check.
     
    a. open Windows Media Player.
    b. click on tools-> Options.
    c. tab extract, uncheck "copy protect music".

    Method 3:
     
    You can also change the Rip settings and check if it helps.
     

    More information on:

     
     
     
     
    Hope this information helps. Please reply with the status so that we can help you.
     

  • changed in the home but can not play games - update your adobe flash player - free and easy - tried but to 2.3 then more nothing happens, said

    Changed for firefox but can't play, says upgrade to the top of adobe flash player - free and easy - have tried this - get 2/3 and then nothing, help please, thank you.

    Have you installed the Plugin of Flash for Firefox version?
    IE (ActiveX) and Chrome (pepper) each use a different version of the Flash of what is needed for Firefox (and other browsers based on Gecko).

    https://www.Adobe.com/products/flashplayer/distribution3.html

Maybe you are looking for