my cd rom is not seeing the place on my computer and not work and see the error on my list of pilots code39

my cd/dvd-rom is not showup on my window and also see the error on my driver code39

Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

http://support.Microsoft.com/kb/982116

These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

Create a System Restore Point beforehand and restart the computer later.

Tags: Windows

Similar Questions

  • I'm stuck in reboot loop after trying to install one of the service packs, my cd rom is not working and I don't have a windows cd anyway, I tried to disable automatic reboot, but it does not work, I am running vista

    get service pack was not installed recovery changes and restart without end, once more I have no cd of windows and my rom is not working anyway, it really is _ me off, my computer was useless for days now and I have a very important job out there which is essential to my work. Thanks a lot for windows, I'll be switching os very soon

    Hi Asdlfjasdfjlasdf,

    How did you install ServicePack initially?

    You can try to start safe mode and try to perform a system restore.

    Step 1:

    For a safe boot, you can follow the below given steps:

    1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

    Click the Start button, click the arrow next to the button lock and then click on restart.

    2. do one of the following:

    a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

    b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

    3. in the display Advanced Startup Options, use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see startup options (including safe mode).

    4 log your computer with a user account with administrator rights.

    When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

    If you are able to boot to the desktop in safe mode try doing a restore of the system at a point when the computer was working fine.

    For more information on Safe Mode, follow the link below:

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    2. in the System Restore dialog box, click on choose a different restore point and then click Next

    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

    4. click on finish

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    For more information, please follow the below given link:

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

    http://support.Microsoft.com/kb/936212/

    After you perform a restore of the system try to boot into normal mode and then download the standalone vista service pack and try to install.

    How to obtain the latest Windows Vista service pack

    http://support.Microsoft.com/kb/935791

    Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

    If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

    The steps to perform a clean boot are given below:

    1 log on to the computer using an account with administrator rights

    2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue

    3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

    4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

    Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

    Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

    For more information about the clean boot, follow the below given link:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

    1. click on start, type msconfig.exe in the start search box and press ENTER.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    2. on the general tab, click the Normal startup option, and then click OK.

    3. When you are prompted to restart the computer, click on restart

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I can not load a CD rom. I get the error message is that the CD rom is 16-bit and my Vista 64 Bit.__What are solutions to make this readable CD Rom in my system.

    I can not load a CD rom.  I get the error message is that the CD rom is 16 bits and my Vista 64-bit.
    What are the solutions to make this readable CD Rom in my system.

    It seems that if the CD is read correctly, but if I interpret your message right, you have problems to install the software.  And if the facts are that it is a product of 16 - bit and Vista is a 64-bit operating system, you won't be able to install it.  Support for older, 16-bit software was removed from Vista and Windows 7.  You would need to consider using a product such as Microsoft's Virtual PC or VirtualBox from Sun Microsystems virtualization to run - and if it were a game, same virtualization may not work.

    'Herb Ellicott City' has written in the new message: * e-mail address is removed from the privacy... *

    I can not load a CD rom.  I get the error message is that the CD rom is 16 bits and my Vista 64-bit.
    What are the solutions to make this readable CD Rom in my system.

  • My CD-ROM/DVD-ROM does not work

    My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
    1 device state poster (this device cannot start. (code 10)).
    2 update driver... shows that the best device driver software is already installed.
    3. it is the driver of manufacturing.
    4. I tried the microsoft fix it downloads and it has not solved the problem.

    Hope that enough information... Oh, my computer is computer laptop HP Pavilion G60-231Wm.

    Grateful for any advice...

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Satellite A30 - CD-ROM does not work correctly

    My CD ROM is not working properly because the drivers corrupt. I tried uninstalling etc. How to load new drivers or even reformat from the recovery disk when the CD-ROM drive does not work?

    Looks like catch 22. Someone at - it help him?

    I agree with Maurice. If the drive can read a recovery media or any other bootable media there must be a hardware problem and I assume that the optical disk drive is defective.

  • After you have installed windows 8 my cd rom is not working.

    After you have installed windows 8 my cd rom is not working. Why this is happening

    Most likely your drivers for the cd rom does not have go into Control Panel/System Device Manager and security for all marked devices other devices that may not have installed the drivers. Most likely, you will need to go to your manufacturers website and find the driver for your specific model, you should be able to download and install it from there.

  • My Sony Vaio E Series model VPCEB32FM CD/DVD ROM is not working or projection upward. Please notify

    My Sony Vaio E Series model VPCEB32FM CD/DVD ROM is not working or projection upward. Please notify

    I tried to remove and reconnect.  I tried to look in the Device Manager.  I tried the patch Microsoft Fixit. None have seemed to work.

    What are some solutions.

    Thanks in advance

    cmczona,

    Did you try to apply this difficulty? If you have, and it still doesn't show, try to start it.  Make sure that you have a bootable disk and make sure it is set to boot from the optical drive in the BIOS first.  If you can't then it's a hardware problem and the player or another material is defective...

  • MrFixIt of E0434F4D program for the error code does not work because of this error

    When you install the update for Microsoft .NET Framework 1.1 SP1, I get the error E0434F4D code.  MrFixIt program does not work because of this error. I can't run applications because of this corruption. Including most Microsoft applications, as soon as I try to run an application, I get a window saying 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "I recently got this used pc and I looked at the history of the update, and it was apparently a failed update for the past two years. This will also prevent me to update other software and drivers on my computer and prevents even me to install new drivers.

    Hello

    1 have had any changes made on the computer before the show?

    2. when exactly you get the error message?

    3. what happens when you try to run Microsoft Fix it?

    4. What is the full and exact error message?

    I suggest you check the thread with a similar problem, and a fix:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/error-code-e0434f4d-what-to-do-to-fix-this/10ac1da2-25AC-495a-a8a5-6dbe2809f7a0

    If you are having problems with Microsoft Fix it tools, I suggest you to send your request in the Microsoft Fix it forums for assistance.

    Microsoft Fix it Forum

    http://social.Microsoft.com/forums/en/fixitcenter/threads

  • I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!

    I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!

    Reinstall the software correctly. Migration / backups do not work due to the specific requirements of the activation system.

    Mylenium

  • pay a MSN does not work! I get error 107

    pay a MSN does not work! I get error 107 what I do?

    Hi stanvowels,

    ·         Other sites work well?

    ·         Exactly when you receive this error?

    You may have to contact the MSN bill pay for help on this one.

    MSN Bill Pay help

    See also:

    MSN support

  • My LifeCam VX-6000 will not work. Rpet (initialization error) on all usb ports. I have windows XP

    My LifeCam VX-6000 will not work. Rpet (initialization error) on all usb ports. I have windows XP

    Hi John4452,

    1. you remember to make changes to the computer, after which the issue started?

    I suggest to try the steps from the link to the following article and check to see if it helps:

    Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software

    Troubleshoot failures to find the new LifeCam hardware

    I hope this helps.

  • I am trying to download items 9 to a new computer and get an error message that says: "the archive file Elements 9 is missing.

    I am trying to download items 9 to a new computer and get an error message that says: "the archive file Elements 9 is missing" how to fix this?

    as well, you need the 7z and the exe.  put them both in the same directory and double-click on the exe file.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

    window using the Lightroom 3 link to see these "important Instructions".

  • I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is

    Help, please? I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is corrupted. Help please! I'm paralyzed!

    [Double question deleted... it is an open forum for other users (sometimes Adobe) answer, not Adobe support...] MOD]

    The best option would be to contact the technical support that can remote into your machine & troubleshoot it. Contact the customer service

    Concerning

    Stéphane

  • I have a computer running VISTA. The CD-ROM/DVD-rom does not work and can not read the CD of the program that I placed in it.

    It won't read a DVD.  It will not read ANY CD or DVD.  I tried 12 different CD/DVD.  This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it.  I had added Nero.  I removed Nero.  I did all the updates. I have not released the driver and reinstalled.  He claims to have the latest driver software, but it won't work.  The computer can see the CD/DVD, but he calls it a 'CDROM '.  It is not the case.  It is a DVD/Cd-RW with Labelflash.

    I did everything suggested that past discussions.  I ran FIXIT program that claims that the drive works properly.  It is not the case.

    I tried to get various programs to recognize.  They cannot see the installed media.

    I uninstalled iTunes.

    Please do not give me the answer of cut-and - paste stock; It does not work.

    Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.

    Thank you.

    Hello

    Well, if you have tried all the usual bugs try this:

    Make a Restore Point:

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    ------------------------------------------------

    Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
    continue.

    Reset.

    Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
    could be at stake.

    =====================================

    Here's the answer, just in case there is something you don't have, and I start up and down.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable
    or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===========================================

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
    saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

    You can use another DVD that are not protected but you will need to copy you have the product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Qosmio G20-117: bad pixels on the screen and the CD rom does not work

    Hello

    I have a problem with the computer hardware. I got a Qosmio G20-117 and you have a problem with the cdrom and the screen. Got bad pixels on the screen, and cdrom does not work. I live in the United Kingdom, so I tried signing up to them to choose the computer before the computer is out of warranty.

    Whenever I register, it says sorry, an unexpected error has occurred, please try again later. I have tried at least 20 times since yesterday and it doesn't seem to work. I have them even called and they told me, the service is stopped and will be fixed this morning but yet nothing works.

    Any solution?

    Hello

    If you want to contact Toshiba service partner in your country then why you don't call them?
    Toshiba page you will find the database with all service providers in the world.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

    I don't think that you need to register something apart from the serial number of your laptop. But in my opinion this could also be done at the point of service.

Maybe you are looking for