my chosen homepage does not. Continuously, it goes back to the same page "mystart". I want Facebook to my homepage... whenever I open firefox it again it happens mystart... help

Similar Questions

• I have published my new folio to an existing application on the app store and made public, but is not in the app store? The notify button does not always take me back to the Organizer screen producer folio.

  I have published my new folio to an existing application on the app store and made public, but is not in the app store? The notify button does not always take me back to the Organizer screen producer folio.

  Hello

  first of all a new folio you post of DPS, the folio will not appear in the App Store, but in the library of the application.

  If this is not the case:

  1 make sure that you have published the folio under the same account that you used to create the Viewer.

  2 - Make sure that you have used a product ID unique for this folio

  3. If the Notify button does not work, note that this feature is available for viewers of enabled notification

  Check whether or not you have the Notification turned on in the dashboard section, otherwise it is likely that this account is not the Application role are entrusted to him... which brings back us to the point #1

• my pc goes back to the password page after slowing for any length

  I have a Toshiba laptop Satellite L775 I have ie7 home edition on... when I turn on my laptop, it opens to a password page to go further... After doing so, he opens Firefox and then I click on it to open my Yahoo home page on... If I have to wait for 1-2 minutes without using any key or move the mouse the computer turns blue and goes back to the page... my connection password once I type my password to the top, it automatically goes back to the last page I was on until the computer became inactive.    Is someone can you please tell me what the devil is going on?  BTW, if you have any suggestions, please keep in mind that I'm not computer literate, so please, please, take me step by step through the process!  Thank you, in advance... Bruce Green

  Try this:

  Right-click on your desktop

  Go to 'Customize' and click

  Click on "Screen saver" at the bottom left

  Make sure that you have to 'None '.

  Looks a little like your computer what mode without a photo screen saver to me, a newspaper in not requiring to return to what you were doing.

• Then the family goes back to the same iCloud account?

  Then the family goes back to the same iCloud account?

  No. No, unless you share an iCloud account, which is a bad idea.

• I get the reminder that the creative cloud is missing or damaged and to download a new CC, when I try to download he did not finish, it goes back to the statement that I need to download any new creative cloud.  Anyone who has this problem

  I get the reminder that the creative cloud is missing or damaged, and to download a new CC, when I try to download it will try then goes back to the original message that the CC is damaged or missing.  Anyone else having this problem and what to do?

  If they are cc, Yes.

  Uninstall anything cc, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and then reinstall your cc, Download Adobe Creative Cloud apps desktop app | CC free trial Adobe

  Use the cc desktop app to install your cc of adobe programs.

• Computer keeps going back to the login page asking to enter the password

  Original title: sign in
  When I leave my computer on it continues to go back to the log in page asking my password once again, how can I stop it this?

  When I leave my computer on it continues to go back to the log in page asking my password once again, how can I stop it this?

  Change your screen saver settings so it doesn't LOCK (it will not disconnect, your work is always there.  It is a security feature). the screen and return to the logon screen.

  http://www.ehow.com/how_2342402_adjust-screen-saver-settings-Windows.html

• Installed new module memory for laptop, found original was bad, while windows Vista does not start by going blank after the "status bar".

  I have a Windows Vista running on a Sony VIAO laptop and has been updated with level 3 to 4 GB of memory. During the memory test, I found that 2 GB of original module was bad and replace it with the new 2 GB module end back where I started with 3 GB. However, Windows starts only at a little past the rectangle with 3 points moving ("State Bar"?) and them it goes to black and the desktop never appears. I tried to roll back to the last working version of Windows settings, but always the same results.

  What can I do now? Is there a way to check and fix disk errors?  Is it possible to install Windows XP Pro or I have to go to Windows 7.  I even has System Mechanic Pro running on this laptop and it did help some casued the problem. It's as if the disc is damaged for some reason any.  Only with Vista felt this helpless.

  It seems to me that the new memory you have installed is bad or incompatible with the system.  First, remove all chips and reinstall them and then try to make sure that they are correct and secure again - don't just press them in place, effectively remove and the replacement and make sure they are in the right direction.

  Boot from the Installation of Windows Vista genuine disc (or you can borrow from someone) or a recovery disc with recovery options included in this topic. If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (perhaps made on another computer, or perhaps in SafeMode with network if it does not - that would be a good sign if it is true). You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.  Select recovery options and follow the instructions until you see the menu.  Once there, select the Windows Memory Diagnostic tool and run it and see what it says.  If it detects problems (and I suspect it might), you may need to replace the new chip memory.

  I hope this helps.  If this isn't the case, after return and we will try other options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• History does not and cannot go back to the browser.

  After the last update for firefox, it does not work.

  He stopped to remember information, when I tap on the top bar, previous search items do not come to the top, there is no history in my story, and when I try to go back a page, I can't it does not allow me to. If for some reason it isn't save data or sites that I go on. He has also deleted all my favorites. So I did a little research download the addon from repair maintenance, tried without success. So I completed a clean-install of firefox, and I'm still stuck with the same question.

  Anyone got any ideas? I have always used firefox after a week of trying to figure out what I'm thinking of other browsers, but I don't want to leave! hahaha

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• Windows 7 does not connect to other computers in the same homegroup network

  Computer is a Dell Latitude E6500 in good working condition. Printer is connected to a desktop computer running on Pentium IV with HP LasetJet 2100.  The Pentium IV is only for printing but must be able to make a link to it. All systems have max ram and large capacity disks. All systems are running Windows 7.

  Hello Willard,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. what happens when you try to connect to other computers? you receive an error message or code?
  2 update you installed before the show?

  Thank you to provide detailed information on the issue and your efforts to resolve.

  This problem can occur for the following reasons:

  -Network discovery may be turned off.
  -Password-protected sharing is turned on.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Why can't I connect to other computers?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Try to install Adobe Flash player on my MacBook Pro, but it does not recognize my password, and yet the same password works on the adobe web site

  password problem when you try to install Adobe Flash player.  my password works on the site of Adobe, but not when I get it on the installer...

  you are be prompted for a password for your mac.  using his password.

• Why cani, I download my Bank acct to accelerate without going back to the login page?

  I have Windows-8 and when I'm in my bank account and try to download to quicken I go immediately to the Bank login page. It was ok huh == when I had Windows XP. It works with windows internet explore. I love Firefox on IE if it is a problem for me. Help, please!

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  Also try Firefox Safe Mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

• When I turn on my computer, it opens in a temporary profile. I tried to restore to a different date, but it only goes back to the same day the problem started.

  How can I restore my computer to an earlier date when the guest continues to show only the same date as the malfunction? I use Windows Vista on a Toshiba Satellite laptop.

  Hi bmikelg48,

  How many restore points that you have? You see an option to view the restore points more? Are all the restore points after the start of the question?  You cannot restore your computer to an earlier date if you do not have a restore point to an earlier date.

  You can find the troubleshooting steps in thisthread useful:

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Clock is ticking slowly and goes back to the same date

  Hello
  I have a problem with the time in my windows vista computer. The clock does not show a good hour. He turns slowly and resets itself at some point in the past. It's pretty hard to explain how the clock does it behave, because can not find any system inside. Here's what I observed (after several reboots etc.).

  -Clock runs slow.
  -Whenever I have set manually in windows and reboot a computer, it shows a few minutes less than it should. More manual seting of the time, is the uncertainty of the clock.
  -Time appears to jump back even without system reboot (for example when I play a game and save it twice (second record straight after the first), the game can even watch a few hours difference between these two stops.) (the second backup is usually shown as if it was in the past). Then, it works very well for a few minutes (stops works fine) and then it does the same thing again)
  -J' tried to set a time directly in the BIOS, restart it several times without leaving windows to load and the weather was exactly the same as I put it...
  -After that I put time directly in the BIOS, let windows to load and returned to the BIOS, the time in the BIOS showed about 2 minutes more time that I put in the first place.

  I tried to set different times in the BIOS, restart the BIOS to factory settings, restart windows of time in administrative tools, but I had no chance to fix this problem.
  I also tried to put internet synchronization (but it does help me solve this problem, because the weather changes very quickly).

  I really don't know what else to do. Please help me.

  Hi read Marek,

  Thanks for the answers on the community forum.

  It sounds as if the CMOS battery on the motherboard may be the cause of the issue of the time.  If your system is under warranty, you can check with the hardware vendor information you reported in your last post of it staying at 11:11 at the Bios level.  Generally, if the system is under warranty your hardware provider will help you replace it or the motherboard, depending on the hardware configuration of the system is.

  Thanks again for the ad at answers.microsoft.com
  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to create a button that goes back to the previous page?

  I would like to create a button that is located within an interactive pdf page which, when a click, turn to my previously visited page.
  
  As the page can be accessed through many other pages the traditional built in action menu does not Execute.
  
  The page that will appear (at the click of a button) is a variety of sizes of mattresses that I want to be accessible by each bed product in our collection. Once the user has looked at the mattress size guide, I want them to be able to back to bed product they were looking for, without having to then do scroll and search.
  
  Is this possible with tricks of javascript?
  
  I found this script:
  
  History.Go (-1);
  
  But allas acrobat was not fond.
  
  Help, please!
  
  Thanks in advance.

  Thanks for the tips!

  I already managed to do the navigation above methods with success.

  I have also since posting this message found the answer via a web document:

  http://cybertext.WordPress.com/2010/07/06/Acrobat-back-and-forward-buttons/

  It seems that if I told him to go to the previous view, it has the same effect as a "back" button.

  Thanks for the quick reply no matter!

  Oli