my computer did not come

Similar Questions

• My computer did not come with a Windows XP restore disk

  My computer did not come with a restore Windows XP disc and I don't know how to get one, because my computer keeps restarting itself and that goes, "your computer must was closed incorrectly, or because of a power failure" and he gives me 3 options of safe mode and then gives me the opportunity to go to windows normally... but all the options I chose... It keeps just restarting on me... My computer did not come with a restore disc and Idk anyone who owns one... then where would I go to get one?

  Some computers have a built-in hard disk recovery partition.  Search for information on this subject on the BIOS screen that appears the first thing when the computer starts.  By pressing Ctrl + F11, accesses a recovery on some Dells partition.

  Otherwise, contact the computer manufacturer and ask if they can provide a restore disc.

• XP don't boot-computer did not come with the XP CD

  XP boot not - need XP Recovery CD, but it came pre-loaded on my computer, w/no CD.  Any suggestions?

  Use the XP Recovery Console to check the file system on your drive HARD and correct all problems of integrity of system files caused by problems of power supply interruption and then try to start your system - this may be all you need to do to get your system running.
  Boot into the Recovery Console Windows using an XP bootable installation CD.
  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
  This is not the same as recovery disks that may have come to a store to purchase the system.
  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
  The ISO bootable image file you need to download is called:
  xp_rec_con. ISO
  Download the ISO from here:
  http://www.mediafire.com/?ueyyzfymmig
  Use this free and easy program to create your bootable CD:
  http://www.ImgBurn.com/
  Here are some instructions for ImgBurn:
  http://Forum.ImgBurn.com/index.php
  ? showtopic = 61
  It would be a good idea to test your bootable CD on a computer running.
  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are
  done before Windows tries to load.  If you miss it, you will need to restart the system again.
  When you start on the CD, follow the instructions:
  Press any key to boot from CD...
  Installing Windows... going to pronounce.
  Press 'R' to enter the Recovery Console.
  Select the installation that you want to access (usually 1: C:\WINDOWS)
  You may be asked to enter the password (usually empty).
  You should be in the folder C:\WINDOWS.  It's the same thing you see in the Explorer folder C:\WINDOWS.
  RC allows commands the base - copy, rename, replace, delete file, chkdsk, fixboot, fixmbr, cd, etc.
  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
  Running chkdsk is very well run even if she can't find any problems.
  Assuming your boot drive is C, run the following command:
  CHKDSK C: /r
  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.
  You must run chkdsk/r again until it finds no error to correct.
  Remove the CD, and then type "exit" to exit the RC and restart the computer.
  You have not to set the BIOS to boot the disk HARD since the CD won't be.
  Once finished the chkdsk/r, see if your system boots.  If this is not the case, to do this:
  The next time that your system has rebooted, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Reinstall Windows XP on Acer Aspire One - computer did not come with a recovery CD

  How to use the product key that came with my Acer Aspire one to reinstall Windows XP without CD?

  Hi MariaMouzes

  You can restore your computer configuration using the procedure described in the link below.

  How can I restore my system using eRecovery management program?

  http://Acer.custhelp.com/app/answers/detail/A_ID/12869

  Or you can buy the recovery media by hint at the link below.

  https://store.Acer.com/store/Acerna/DisplayDataValidationServicePage

  Good luck.

• How come my computer did not come with windows 7 reinstall discs

  Why are'nt windows 7 reinstall disks sent with new computers?

  Save $ 10,

  Contact them and get a.

  There was a class action against Acer for this same reason,

  Do not provide a recovery disk which had Vista on it,

  They had a partition from the factory, but it is not good enough.

• Bookmarks synchronized to the new computer but miniature icons did not come along.

  I have synced my bookmarks to a new computer, but the little miniature icons identify did not come along. So now, there is just a generic blank next to each box until I click on the bookmark, to whom it point refreshes with the appropriate icon. Is it possible to get them all to update without having to visit each site? Thank you very much.

  Try using this addon here. It refreshes the favicon (the small identify the miniature icons) by using your bookmarks.

  Response if it did not help.

• I connected a VGA cable and clicked on the option monitor, he did not come on my t v

  VGA?

  I connected a VGA cable and clicked on the option monitor, he did not come on my t, v and the screen is black when I plug cable in the future. How can I get the possibility to save change?

  Perhaps the following links will propose a few ideas:

  How to connect my computer to a TV
  http://hookpctotv.com/

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set

  PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

  Windows Vista-
  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  Windows Vista-
  HDTV: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  Windows Vista-
  From PC to TV, part 1
  Digital media stream to any room with Windows Media Center and Xbox 360
  http://Windows.Microsoft.com/en-us/Windows-Vista/from-PC-to-TV-part-1-stream-digital-media-to-any-room-with-Windows-Media-Center-and-an-Xbox-360

• My laptop did not come with Media Player 12.

  I have a HP Pavilion DM1 and it did not come with Windows Media Player 12. Or any other media thing. He is nowhere to be seen. I tried to get a download link.

  I tried clicking on the download link for Windows K and KN, but it came up saying: "this update is not applicable to your computer. Windows Media Player 11 did nothing. Please help me. And please don't tell me to download other software media. Thank you.

  Hello JoeHopewell,

  See if you have enabled the Windows Media Player.
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and check the brand in the face of Windows Media Player.
  4 restart the computer

  You can also check to see if you have enabled Windows Media Center as well.

  Now, go to start, all programs. You must have Windows Media Player in the list of programs.

  Please let me know if it helps.

  Sincerely,

  Marilyn

• Why my xbr75x850c did not come with 3d glasses?

  My new XBR75X850C did not come with 3D glasses. Is this typical? Any suggestions on the best lenses for this TV and where to buy?

  Yes, the X850C does not comes with glasses.

  Sony advises Sony TDG-BT400A or the Sony TDG-BT500A that are exactly the same.

  I also tried the folling glasses and they worked for me:
  Samsung SSG - 5150GB
  Samsung SSG - 3100GB
  Panasonic TY-ER3D4MU

• upgrade photoshop but my presets did not come with

  I recently updated my photoshop but my presets did not come with

  You should be able to migrate your old presets using the Edit > Presets > migrate pre-defined parameters.

  

• DB did not come with crs after the node is restarted

  Version of the grid: 11.2.0.3

  OS: Red Hat Enterprise Linux 5.6

  Our two RAC nodes node2 has restarted. At the restart, CRS and ASM instance came. But BP did not come.

  How can I check if DB is related to the CRS start?

  How can I activate the DB startup when starting CRS?

  You can use srvctl command Add the database in order to start automatically. read the link below.

  Utility server control reference

• Cannot run command - drive did not come online. check the configuration/hardw

  I have a Scalar i500 on a Linux host attached via fibre channel. I accept all work to automatically mount the drive. I can't make it work.
  
  I can use the web interface of the i500 and then put a tape in the drive. I can then mount the drive from a secure backup and mount a back very well. Yet, I can not run a backup without a mounted tape. If I choose "load Volume (by car)...." I get the error ' cannot run the command - drive did not come online; check the configuration/hardware.
  
  I can the inventory of the library and do anything except automount readers. I run an audit and configuration back with no errors. I tried to use the SCSI settings in the obl0 and obt0 and obt2 without success. I tried to use the/dev/sg raw without success paths. Same mistake.
  
  It is an upgrade from 10.1 to 10.3 installation. I tried to do a clean install with the same question. I've restored the installation and then run an upgrade with the same question.
  
  I'm stuck. Please help :)
  
  Thank you

  It seems you have the DTE is exchanged.

  Swap the DTE # assigned to objects device disk and try again. This could happen during an upgrade if you reassigned the scsi settings and features obt0 and obt1 swapped the scsi settings when they ran the last things.

• my printer did not come with all the cables needed to connect to my computer

  I just got a PIXMA ip2820 and he came with all the cables needed to connect to my pc or is it wireliss and if so how I managed to connect wireless

  Hello.

  Our printers do not come with USB cables.  If you do not have a cable connected to a previous printer, you can buy any B USB standard cable locally has to establish the connection.  It is a pretty common cable located at most major retailers office supply or electronics.

  The iP2820 can only be used with a USB connection.  It doesn't have wireless capabilities.

  It has not responded to your question or problem? Find more help contact us.

• moving data from Thunderbird to a new computer did not work - help, please!

  I - I hope! -followed all instructions Support of Thunderbird on moving a profile from one computer to another with a different OS (save a copy of the profile of the first computer file, download and install TB on the new computer, find the 'Profile' folder and then either paste the contents of the old profile file in the new profile file [thus overwrite the latter]) then open TB... but it didn't work.

  I then tried the same thing, but with a slightly different method: I copied the name of the new profile file, he has given the profile of the old computer file, then renamed the new file profile and pasted the old profile file - now with the new designation - in the new directory... which also did not work.

  I spent a few hours trying to get this to work and am almost to the point of giving up on tuberculosis as an e-mail.

  Any help would be welcome!

  Hi, Matt;

  Thank you for your continued support - I appreciate it!

  Yesterday, I downloaded the command-line tool dbx to eml unless you had kindly recommended (at http://code.google.com/p/undbx/ ), and, as I had supposed, its function is to do what OE itself can only do by email - that is, convert a .dbx .eml format - but do it by folder, records forever, which is much more elegant.

  The tool dbx to eml was very easy to download and use, and I could ask him to convert all my files at once (which is equivalent to more than 50 records and hundreds of emails). He did a great job, and I was able to identify the location of the output directory that results anywhere I wanted.

  Because the tool dbx to eml records records converted to any specified location, one can then import them into Thunderbird Thunderbird either on the same or another computer.

  I wanted to spend all my email OE to a new computer (which involves a passage from XP to Windows 7), and, in my case, it was easy to do because I have two computers connected by a network (intranet) data drives: after you convert all the OE dbx eml files, I went to my new computer to Thunderbird instance and , using the add-on for Thunderbird Import-ExportTools (https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/), I simply imported saved eml files, one at a time. It has worked flawlessly.

  In a situation in which two computers were not connected by a network, we could easily save the eml on a USB output directory and have computer of the new Thunderbird import eml from this location.

  I would also add that this dbx to eml command-line tool is supposed to also function as a current backup utility: it begs for find and convert new files later in OE, and it only will not do, but is also their corresponding folders in the original output folder, if they exist from a previous operation.

  I still have to import all my newly created on my Windows 7 Thunderbird eml files, but - so far - it seems like it should work smoothly.

  Based on the different methods I did research - and the few that I actually tried - has my reviews, so far, is that using the tool of command line without dbx-to-eml, at http://code.google.com/p/undbx/ , is the way simpler and more reliable to move files from email Outlook Express - within their corresponding e-mail folders - to Thunderbird , either the same or different computers.

  It would be nice if Mozilla could try this method for themselves, and - if they are to find it as infallible, as I - promote this as one of the first methods to use to move electronic mail Outlook Express to Thunderbird. It others will save a lot of time and frustration.

  Matt - your kind and generous support made it happen: thanks!

• Sony Vaio did not come with recovery cd and have not been able to locate the online game

  I have a Sony Vaio, which has a few years working with Windows XP Home Edition.  When I bought the computer first, I wasn't very experienced technilogically who did not think about twice the computer comes not not with an operating system cd.  In any case, now that the computer is a few years old I am aware of the importance of having this cd as a backup, if all else fails.  My problem is when I went on the Sony website where a list of retailers has been provided which might carry the recovery CD.  After phone calls and emails, I have yet to find one that still bears then Sony Vaio Recovery Set.  I always have my genuine key of Windows Xp, as well as of the receipt of the purchase of the computer.  I'm more concerned with a new installation or not all original came with my computer (ie. sony) programs.  My concern is just to find a real cd that I can use in the unfortunate situation where I have to reinstall my operating system.  Any help would be greatly appreciated.  Thank you for your time.

  Maybe you have a recovery partition.

  Pressing F10 or F11 key when you turn on your system can put you in a recovery partition.

  TaurArian [MVP] 2005-2011 - Update Services