My computer has entered a view type safe mode?
I turned off my computer last night and it was fine and running windows 7 and could easily and quickly connect to the internet, however, I came home today about 20 hours later and I loaded my computer and I typed my password and it loaded to upward in a very 'windows xp', looking away, with the bar of the same thing and it looks like SafeMode it entered task how I can't fill anything either because I can't connect to the Internet and can not restore and do not have much access to anything, I tried as if he were in safe mode but who got, he nowwhere, if anyone can be of any assistance to as why this is happening, I would be very grateful.
Hello
See if these methods help you.
Do a system restore to before that the problem, if necessary in Safe Mode IF the problem is not a problem of 'Safe Mode' you think it's...
"In Windows 7 system restore:
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
'Advanced options boot (including safe mode).
"The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"
_______________________________________________
IF you are using the safe:
To exit Safe Mode, you must do more that select Normal startup (see Startup tab).
- Close all running programs and open the windows if you are back on the desktop.
- Click on the Start () button.
- In the search box of the Start Menu, type in msconfig
- Then press enter on your keyboard.
- The System Configuration utility opens
- Make sure that Start Selection is set for Normal start.
- Click the Startup tab.
- Make sure you start is not checked
- Press the apply button and then press the OK button.
- Click the restart button to restart your computer.
- See you soon.
Tags: Windows
Similar Questions
-
My computer suddenly goes into safe mode of power and I am not able to restore in normal mode without rebooting the computer. How can I stop this from happening? My OS is Windows Vista Ultimate 64-bit.
Thank you
JO Ann
Hello
You should be able to solve this problem by activating the mode Hibernate in the command prompt. If she hibernates, it will save an image where you are on your hard drive and you will be in business once the power returns.You must also make sure that your power options would spend in hibernation mode when the power is lower at some point.- Click Start and type 'CMD '.
- Right click on CMD and run as administrator.
- Click on continue when you are prompted.
- "Type in the command prompt" "" powercfg.exe /Hibernate on.
- Go to the options to be able to enter the control panel by typing in "Power Options."
- You will see the different power options. The one you have selected, that's what you are currently using. Click on "change plan settings".
- Click on "change power avancΘs."
- Scroll down to the battery and you will see the options of low battery and critical battery responses. Make sure they are set for the hibernation.
I hope that after these steps, your problems. Please let me know if you have any questions. -
my Vista computer can't get out of safe mode
my computer can't get out of safe mode... Help
Hello
- Close all running programs and open the windows if you are back on the desktop.
- Click on the Start () button.
- In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
- The System Configuration utility opens
- Make sure the Normal startup is selected
- then click on the STARTUP tab at the top
- Make sure that the startup is disabled
- Apply - OK - then follow restart guests
________________________________________________________
If the above does not apply to you
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable
Contact the computer manufacturer and ask them to send vista recovery discs
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
-
I got to my computer today and there was a blue screen with white writing about him say a word on the internal discharge. Then later in the day, the computer froze, after a while the screen went black with just the cursor on the screen. I restarted the computer and now it just does not start. In normal mode it gets as far as the loading screen Windows with the movement of green bar but stays on it indefinitely. If I try to start in safe mode it gets as much as crcdisk.sys and then crashes, and if I try to boot from the Vista recovery disc, it also only gets the windows loading green bar and stay on it. Any help on this would be much appreciated. Thanks in advance.
Hello
What is the full error message?
Follow the suggestions and see if it helps.
Method 1
I suggest that do you the Startup Repair through the system recovery options with a Windows Vista installation disc.
What are the system recovery options in Windows Vista?
Method 2
I suggest that you perform the system restore from the system recovery options with a Windows Vista installation disc.
What are the system recovery options in Windows Vista?
Method 3
Perform the disk check via the system recovery options with a Windows Vista installation disc.
a.Select command prompt.
b.Type chkdsk /f and press ENTER.
Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors
What are the system recovery options in Windows Vista?
-
Firefox has decided to open in safe mode - what do I do now?
Firefox unexpectedly closed several times. It happened at times he wasn't out of the ordinary. Now, he says that he started in safe mode (my computer is not in safe mode). I noticed that MultiFox is not listed in the "File" drop-down menu. Multifox and what looks like the rest of my modules are listed in "Add-ons". Safe mode view asked if I wanted to remove the modules, bookmarks and 3 or 4 other things. I don't have any idea what to do. Any suggestions?
Which icon or a shortcut you use to start Firefox?
In the start menu > menu all programs, there should be two different shortcuts to launch Firefox, which would be labeled Firefox (safe mode) - try to use the other shortcut, marked only Firefox. -
My computer just won't start in safe mode...
My computer just won't start in SafeMode... after the signs up to 'safe mode' and pushing enter... it stops (no signal) and normally restarts itself! I need to get rid of malware and infections in the start up... hmmmmm
First, run a full scan with:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
If nothing detects remove, also try run system restore and your system at a time before the problem happens.
-
Hello, I want to know how to get my computer to get to sleep in safe mode?
My computer is running on Windows 7 and I want my PC to sleep in safe mode when I use it not and also I want to see my life of the battery in safe mode.
Hello
Go from the following link, it has information to optimize Windows 7 for better performance.
Optimize Windows 7 for better performance.
http://Windows.Microsoft.com/en-in/Windows7/optimize-Windows-7-for-better-performance
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
See the following link for work on playback of videos online.
Video problems when you use Internet Explorer.
http://support.Microsoft.com/kb/2532294
I hope this helps.
-
computer does not restart after installing updates for xp home edition - does not restart in any mode (including safe mode)
HiRonKlip,
If you have the Windows XP installation disk, you can perform a manual system restore by following this link.
How do I recover from a corrupted registry that prevents Windows XP startup
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
My operating system is windows xp sp2... It is protected with bitdefender internet security 2011.but all of a sudden when I shut down my computer that he would shut down in safe mode... & then it starts and close in safety mode.what do I do to take back to the normal mode?
Try raising 'msconfig' (start-> Run-> "msconfig").
Once msconfig is running, click on the tab "Boot.ini" and check that the "/ SAFEBOOT" box is not checked.HTH,
JW -
Computer laptop XP only works in safe mode
Until a few days ago, my laptop worked fine. With the help of XP Professional.
Now I start up, the Windows screen, then it shows a white screen. I then turn off via the power switch.
I can however boot in safe mode, but can't do much with it because almost nothing works, for example internet, backup disks.
Any ideas? I don't have XP disc as ths was all preloaded so can not try to reinstall.
Thank you!
Hello1. what changes have been made to your computer before the problem?2. do you get an error message/code?Follow the steps mentioned below and check if that helps.Step 1:Disconnect non-essential external devices and try to start.Step 2:Try last good known Configuration from the advanced boot options.Step 1:If this does not help, because it works fine in safe mode, I would put your computer in a clean boot State in order to determine if the problem is related to a software conflict of third parties. Clean boot helps eliminate conflicts of third party software.Note: Don't forget to restart your computer as usual.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
I get fatal errors to computer of Java runtime environment in safe mode I should delete?
I am again in safe mode, I have a fatal error in Java, which is the reason also to the pogo
Hi Grannybarbara,
1. what happens when you start in normal mode?
2. What is the full error message you get?
3. did you of recent changes on the system?
4. what web browser do you use?
Since you are in safe mode, you can try to perform a clean boot and check if you can start the normal mode without any problem.
Method 1:
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
Method 2:
Step 1:
If you are able to boot into normal mode with no problems, then check if the uninstalling and reinstalling Java can help solve the problem.
To uninstall older versions, see the following link.
Why should I remove old versions of Java in my system?
Step 2: To install the latest version, visit the following link.
Download the free Java software
Hope this information is useful.
-
I got a message pop up saying I've been low on free space, I select the files to delete the computer option. He ran through the process and deleted files. I shut down the computer and have not used for a few days.
I tried to connect this morning it took forever to get to the password page, when I chose my name once again it took forever to load the password box. He then told the welcome as usual, but for several minutes and then the screen turns off, I left for almost an hour and nothing. I removed the battery and connected in safe mode that began end.
My system using windows Vista. I'm not good with computers so all ideas/help would be great.
Hello CarrieWilliams,
Thanks for your post. Try a Startup Repair before leaving for the new facility. Let us know the results, we look forward to hearing back on your part.
See you soon
-
computer laptop freeze terribly - even in safe mode.
I received my new HP Pavilion in February and since I got it it has been freezing upwards. I can't leave it on for more than half an hour about without touching and it freezes. At first I thought I could deal with it, I used to treat difficult computers and I was just happy to have my own... but then he started to gel and from time to time when I tried to turn it back on it would lead me to a black screen with blue text saying that it doesn't even have an operating system. I let a little and restart it and suddenly windows would be back and it works fine. Frost continued, and then it started to freeze during this loading windows. I tried to restore the system to the last time a few times. Now it has arrived at the point where I can't turn without it freezing one minute after the Office has completely loaded. I don't even have time to open anything to try to find out what's wrong and he did this in each safe mode as well. I'm completely stuck on where to go from here. I don't know even how to restore to its original state if I can't even open the Control Panel before the laptop freezes on me. And I mean freezes. The mouse will not move, the screen does not change, the time does not change. I can't do something, but hold the power button to turn off.
I'm really desperate for help or I wouldn't be here. I read in forums for two days trying to find a solution... so here I am. Any help would be really appreciated.
Hello
Well maybe it is the answer to your problem because an error 303 is a failure of the test short HDD - the only solution is to have the hard drive replaced.
You will need to contact HP and arrange for the laptop repaired under warranty.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
Kind regards
DP - K
-
Computer Windows XP it's in safe mode when you install iPod?
Original title: I got an Ipod Touch as a birthday gift... I can not installed because whenever I tried, I got a message saying that my compu is in Mode safe... can someone help me?
I think I have already explained in the title space.
Hello
1. is the issue limited to only iPod Touch installation?
2. you are the administrator of the computer?You can follow the methods below:
Method 1: Start the Windows Installer Service.
(a) click the Start button and select run.
(b) type services.msc in the run box and press on enter.
(c) locate the Windows Installer service.
(d) verify that the status is started. If the condition column is blank, right-click on Windows Installer and select start.
(e) If you get error trying to force start the Windows Installer service, then try to change the Startup Type to automatic.
(f) restart the computer.Method 2: We will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
http://www.Microsoft.com/security/scanner/en-us/default.aspxIf the problem persists, please contact the Apple Support.
-
Blue screen in normal view. Safe mode œuvres
Windows Vista Edition Home Premium. Toshiba laptop. To start in normal mode, can't seem to connect, but then after a few moments, 10-20 seconds or so the PC will be blue screen codes 0x0000008E 0xC0000005 0x862721A7 0xACA6591C.
Can boot into normal mode, with networking. However, many things do not work properly. System restore fails with the error message "system restore failed due to an unspecified error. "The parameter is incorrect (0 x 80070057) '. Event logs have stopped updating. Try to directly access gives the error message "Event Viewer cannot open the newspaper...". The request is not supported (50). Old newspapers can be read as if they are old newspapers registered, but even if the logs are renamed, new logs is not created. Windows Update does not open. New user accounts can be created, but then disappear. Time is right at the minute, but time keeps changing on reboot, it seems to be random. CHKDSK does not restart.
Service event log Windows is running. There is free space on the hard drive. No hardware or software is installed or updated at the time of the occurrence of the problem. I don't have a Windows installation disc.
If you are unable to Windows, try to go to Mode without fail (quickly press F8 just before the Windows splash screen appears.
Please provide the following information:
-Zip please the contents of the directory C:\Windows\Minidump
-Transfer to the public area of a SkyDrive (https://skydrive.live.com) account
-Post a link here so we can download it.
and
-Go to start and type "msinfo32" and press enter
-When the utility opens, save a copy of it as an .nfo file and another copy in a txt file.
-Zip them upward and download them to the Public to a SkyDrive (https://skydrive.live.com) account field
-Post a link here so we can download it.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65
Use SkyDrive to upload collected files:
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65
Instructions courtesy of http://www.carrona.org/
And http://sysnative.com
More reading both.
Maybe you are looking for
-
which printers are compatible with the Sierra
My Canon MX 892 is toast with MacOS 10.12, is not formatting correctly or partially to print 1st page and quit smoking. Is someone using a printer with Sierra running normally? Canon does not have an eta for a working driver.
-
How can I synchronize all three of my apple products?
How can I synchronize all three of my apple products?
-
I want to be able to access my Mac Mini to the road, but it supports the latest OS is 10.6.8 which was at the time of MobileMe. How can I use back to my mac to access the mini? Thank you!
-
How to cancel the HP SMART WEB PRINTING?
I bought a new Hp photosmart C4780 printer and I installed it. But now, everytime I open internet explorer, web printing smart hp comes and I have to stop it myself all the time. How can I disable this web to print? I use internet explorer 8 on Windo
-
My 6520 6510 printers will not print black ink
Replace a black cartridge in my Photosmart 6510 printer and it wouldn't work. Check all measurements in the help guide. Still does not work. We also had a Photosmart 6520 in the storage of a recent move, so tried. Using the same cartridges, black