My computer is getting hung up on screen with some weird connection cursor movement.

Similar Questions

• When I turn on my computer, I get a blank black screen and must disable it again.

  When I turn on my computer, I get a blank black screen. Then, I turned off the computer and turned it back and a message says turn on in safe mode, safe mode with networking, or safe mode with command prompt.  I turned on in safe mode with network, then I got a message saying check your network settings or material in your control panel, but I don't know what to check. Then I did a system restore to an earlier date. Everything was well computer works well again. Then when I turned on my computer this morning the same thing again. I did the same restore to an earlier date and then was able to use my computer. Someone at - it ideas why this happened? the computer worked fine until two days ago. I use windows xp home addition.

  Hi jantravis,

  ·         There were no significant changes made on the computer before the show?

  ·         Have you installed new software, hardware or Windows updates?

  ·         You get any message on the computer when the problem occurs?

  ·         What is the exact message that you receive in safe mode?

  Check to see if this article helps you.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• cannot re start my system by getting only a black screen with recovery of window failure

  original title: do not re start

  I have a dell inspiron laptop and tried to install windows7 vista upgrade, since, so I can not re boot my system by getting only a black screen with insufficient recovery window, I followed the instructions on the screen to re-boot without success, and when I insert the disc of the operating system for re install nothing happens, Pls help TKS.
  Myrna

  Hi myrnaspiers,

   

  1. What is the exact error you get when you try to start windows.

  2. what type of installation you have done, it's a custom Setup or an upgrade.

  3. check if you have the option to go back to the old version of windows.

  I suggest you follow the link to black screen when I start Windows 7 below.

   

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

  I also suggest you start in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.

  To open the Startup Repair refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  For more information about the Startup Repair, refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• Problem re-installing VISTA after the removal of Windows 8 Preview Release, all I get is a black screen with a message "Not found operating system"

  I recently tried Win 8 on my VAIO laptop spare parts on which I ran Vista, after having previously deleted all the files and documents (I don't use often the laptop). Having concluded that Win8 will really work correctly with a touch screen (and the display size was bad as well), I uninstalled WIN 8, understand that I have to re - install Vista from my rescue disks. This I tried successfully a few months previously to make a clean reinstall. However, after removing 8 WIN via the Control Panel, I can't re - install Vista now. All I get is a black screen with a message "The operating system not found" and the rescue disks do not register. What can I do? I like Vista (although I now run Win 7 on my PC) and really want to put it back. Grateful for the advice.

  Well I finally fixed it by tweaking the BOOT BIOS settings and find something along the lines of VAIO Setup. I'm afraid, I just don't remember exactly what I did, but suddenly I found and ran 'VAIO Hardware Diagnostics' gave me a heart when it announced "no error was detected on the Vaio. Then I saw there was an entry for 'VAIO Recovery Utility - Recovery Wizard' and everything started to load. Since the 2 recovery discs I had. Finally, I ran MS Office and Small Business CD-ROM and now everything is back the way that it used to be. Here I had taken more note of how I got to the well Recovery Wizard. I hope that I never have to do it again!

• I have a statioery box that appears in the cenbter of my screen. Cannot close - the cursor moves UNDER it. How can I get rid of him?

  I have a box of stationery that opens in the center of my screen.  Cannot close - the cursor moves UNDER it. How can I get rid of him?

  Hello

  1. when exactly you get the pop up?

  2. What is the pop up to say?

  Additional information on the issue so that we can better help you.

• I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

  * Original title: start Windows 7

  I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

  Probably yes it is damaged in the case otherwise he would start.

• How to get the orientation angle screen with 40 Hz stably without delay to sync?

  Goal: Get orientation angle screen at 40 Hz stably without delay for synchronization.

  Problem with two situations:

  1. When you use the bbutil_swap and navigator_event_get_orientation_angle (event) to get the orientation angle screen with other data such as acceleration sensors and gyroscope data, the sampling frequency will be low grade at 10 Hz randomly. The difference of synchronization will increase from 25 ms to 100 ms.

  2. when the screen orientation angle is collected in the following code to get the angle only, the difference in timing of sampling will be 1, 2 or 5 seconds at random.

  Question: How do I get the orientation angle screen with 40 Hz stably without delay to sync?

  or something wrong in my code?

  Mini code:

  public static void handleNavigatorEvent(bps_event_t *event) {}
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true); If not the line, no updates on the screen rotation.
  angle = navigator_event_get_orientation_angle (event);
  break;
  case NAVIGATOR_EXIT:
  stop = true;
  break;
  }
  }

  public static void handle_events() {}
  for(; ) {
  bps_event_t * event = NULL;
  If (BPS_SUCCESS! = bps_get_event (& event, 0)) {}
  fprintf (stderr, "bps_get_event failed\n");
  break;
  }
  If {(event)
  If (bps_event_get_domain (event) is {navigator_get_domain()})
  handleNavigatorEvent (event);
  }
  } else {}
  break;
  }
  pthread_create (& t1, NULL, (void *) & rawacceleration, NULL);
  }
  }

  int main (int argc, char * argv []) {}
  screen_create_context (& screen_cxt, 0);
  bps_initialize();

  {If (EXIT_SUCCESS! = {bbutil_init_egl (screen_cxt))}
  fprintf (stderr, "bbutil_init_egl failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  If (BPS_SUCCESS! = screen_request_events (screen_cxt)) {}
  fprintf (stderr, "screen_request_events failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "navigator_request_events failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
  fprintf (rawlog, "Absorption system, Angle\n");

  navigator_request_events (0);

  While (! shutdown) {}
  handle_events();
  bbutil_swap();
  }

  closeshutdown();

  return 0;
  }

  Thank you for your attention,

  Using SENSOR_TYPE_ORIENTATION of sensor_type_t , you should be able to get > 10 Hz.  Use sensor_set_rate() to get the slower delay to call sensor_info().  Make sure not to enable sensor_set_skip_duplicates().

  However get the orientation at the 40 Hz streaming will not make your application any repsonsive more.  The only way to make your app more would be to manage the orientation change in a short period of time.  This is the time when orientation changes (at the hardware level), to receive you and to deal with it.  It is usually a constraint system and there is not that you can do about it.  What you see using the code above is the same information repeated over and over; FACE_UP, FACE_UP, FACE_UP, which is not really useful.

• Hi, after that I tried to load either a new or existing project into Adobe first Elements 9 I just get a grey white screen with any of the timeline, boxes etc. on the view. It happened suddenly, one day OK then not! At the top of the screen, I get normal

  Hi, after that I tried to load either a new or existing project into Adobe first Elements 9 I just get a grey white screen with any of the timeline, boxes etc. on the view. It happened suddenly, one day OK then not! At the top of the screen, I get the normal icon of pre, File, Edit, Clip, etc..

  I intend to have bought the first 13 items, it would be better if I bought a new program instead of downloading an upgrade, just in case the upgrade does not correctly load because of the error with my current program?

  If I have the deleted first Elements 9 on my PC would I lose all my existing videos that have been produced using Prime Elements 9 or would they be registered so that they can still be worked in first 13 items?

  First elements 13 works with Windows 7?

  Thank you

  Terry

  First 13 elements absolutely works with Windows 7!

  In fact, I highly recommend you download the free trial version and give it a test run.

  In the meantime, go to Windows Update and make sure you have all the updates of Windows, including those who do not automatically install it. Then go to the website of ATI / nVidia and ensure that you have the latest driver for your graphics card and go to Apple.com and ensure you have the latest version of Quicktime, by the requirements of the program.

• Windows not working-turn on computer and get nothing but a screen is empty

  Turn on computer and nothing else than a screen empty must cut the restart of the computer and you connect via Safe Mode scanned with my security system and Microsoft, but no problem what is wrong

  It could be that your video card has been set to a setting that your monitor does not support.  When you start using safe, try to change your monitor configuration to something different.
  Right-click empty space in desktop-> properties-> settings (tab)
  I suggest to change 'screen resolution' to something different.  No matter that you don't have many choices or screen looks terrible in this resolution, but simply change to something different and "OK" your way out.  Then, restart your computer in Normal mode and see if it displays now something.  If so, then change the resolution to anything that works for you.  You'll probably have more choice in Normal Mode.

  HTH,
  JW

• When I start the laptop with home premium, all I get is a blue screen with 'owner' in the middle. None of the arrows or connection etc... I just used last week and was allowed

  I start my HP laptop, just get clear blue screen with 'owner' in the middle.  I can't get out of this pic.  even when I turned off, he returns in this... cannot log in or anything

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Computer starts up, it stops at a black screen with the mouse icon (which moves around as usual)

  When I start my laptop, it goes through all the loading screens (Windows Vista etc.) then sticks to a black screen with the mouse icon... I somehow managed to try a restore of the system by a few points, but they all failed a moment I can't even find this option.

  Hi Peter,

  1. have you done any recent hardware or software changes to the computer before the show?

  2. with what code error did system restore fail?

  Method 1:

  Try to start the computer in safe mode and check if the problem persists,

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try and perform a startup repair and check if that helps you.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• When I open Photoshop CS4 all I get is a black screen with photos

  I can't get the pictures to open in CS4, all I get is a black screen.

  I have Vista Business operating system.

  I install the admin, I have video gforce3, ops Windows Vista Business card.

  1.67 GHz Intel Core 2 Duo
  cache of 64 kilobytes main memory
  secondary memory 2048 k-cached

  2046 megabytes installed memory

  You need to update Photoshopto to version 11.0.1.

  What is the exact model number and manufacturer of the video card? Have you checked for drivers updated on their website?

  If you have done all that, see if the problem goes away when you turn off OpenGL in PS preferences.

• PC will not boot past the home screen with USB HDD connected?

  Please read the entire post before suggesting a solution.

  Mobo: ASUS P8Z68-V LX, on the latest version of the BIOS.  Eight USB 2.0 ports, two USB 3.0 ports.  Intel i5 CPU. 8 GB of DDR3 RAM. Graphics card is NVIDIA GTS 8800 512, and I have a GTX 960 FTW on the way. Corsair CSX500 PSU.

  Model reader problem: WDBHML0040HAL-RK

  -J' ordered this drive of Studio 4 to WD outside of eBay for $109, used. The drive has been used previously on OS X, and I had planned to use it between two Windows 7, 10 and 10 OS X via dual-boot.
  -Boots PC regularly without the connected reader, but it hangs at the splash screen, if the player is connected to one of my 10 USB ports.
  -I can't not to enter the BIOS with the drive connected, and if I get into the BIOS without connection, BIOS freezes as soon as I make it connect.
  -I went into the BIOS, (with the device / disconnected /), and external hard drives moved to the low boot priority. This had no effect.
  -The PC recognises the drive if it is connected / after start. I can copy files to and from the disk without flaw.
  -When it is received, the disk has been formatted with a face-to-face 200 MB EFI system partition, (I have no background knowledge about it), with the rest ~3.5TB unscathed HFS + space.
  -Immediately, I formatted the partition HFS + and it separated in exFAT and NTFS.
  -Deletion of the EFI partition to command line has no effect.

  Someone online says that this is due to the ASUS P8Z68 trying to boot from the drive and to disable "Legacy USB Support" from the BIOS, but my knowledge of the ways all USB devices are disabled, including keyboards. I am doing a FULL disk formatting and will update the post I have try these solutions.

  I'm really in a bind here, guys. In all, any help is appreciated.

  Solved myself. I went back to the basics:

  The drive is 4 TB and I'm trying to use it as exFAT, for compatibility purposes. exFAT supports up to 2 TB per partition. The solutions are either break the 4 TB drive halfway, or to use the NTFS system.

  For the record, I chose exFAT.

  Marking this question.

• Double option missing in several drop-down screens with Windows 7 connected to Panasonic Plasma Panel

  Working with multiple monitors with Windows 7 - connected Panasonic Plasma Panel to the laptop. He showed parallel double screen on the two instantly. I tried to set the resolution and then display duplicate in multiple monitors drop down option is no longer available? What is the benchmark for this - I want to use two monitors with the same screen for the discussions.

  Hello

  You can try to configure the display on a very low resolution just to test if the option back. If it comes the problem is related to the video card is not able to support a higher resolution. So, I suggest you contact the manufacturer to obtain the best resolution taken in charge check and graphics card if it helps.

• Computer Vista gets to the BIOS screen, then restarts continually.

  It's on a Dell Inspiron desktop PC. I was browsing youtube, when I noticed when I clicked on something, he did not. Although the outlines of the buttons flashed as soon as I waved above them. If I clicked on a bookmark, it says that my internet connection is bad. But I was watching youtube, 3 minutes earlier.
  I close firefox, then go to the office. I CAN'T RIGHT CLICK! OR LEFT CLICK. On some points, I can click.  And some I can't. I unplug the computer from the wall. Rinse power. Wait 5 minutes. Restarts. Computer gets to the Dell BIOS screen. Will beep once, makes a sound of flickering, light flashes orange and repeats the process forever. I press F12 for the boot menu. Press enter on the SATA hard drive. And it starts fine. But I want to solve this problem, help!

  Hello

  You do not have the cold hard first permanently in the boot order?

  If you do, try the following steps to find your problem:

  "The computer does not start in Microsoft Windows Vista"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

  Using Dell Diagnostics:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  See you soon.