my computer is useless until it 'heats' for 15 minutes - how to fix this?
After that I turned on my laptop, I have to have at least 15 minutes to use it as it became so slow. I get "not responding" much. There is no virus detected. I have a Toshiba Satellite that is about 6 years old.
Don't let many programs start with Windows if you don't need it out immediately.
Many programs adds a key in the registry automatically during the installation to start with Windows.
So once Windows loaded, these programs remain running in the background without requiring you really need them.
You can always start these programs manually via start > all programs when you need it. However, it is always important that your Antivirus and your firewall is activated and starts with Windows.
Everything else is optional and it is up to you decide which programs you think are useful to start with Windows or not.
To disable some programs from starting with windows, go to start > run and type: "msconfig" (without the quotes).
Select the "Startup" tab and uncheck what you don't want to start with Windows.
You can always reactivate their then selecting them.
UTC/GMT is 15:36 on Saturday, August 4, 2012
Tags: Windows
Similar Questions
-
An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?
This issue has been resolved with the article below
-
No matter what Web site I'm on, registration is not correct and sometimes words, doomed, entire pages are unreadable, until I high brightness or parade before the clutter and then again until I have to read. How can I get Web pages to appear readable as soon as they appear?
Hello
Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.
You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Then perform the following steps:
- Open the Firefox Options (Preferences on Mac or Linux) as follows:
- In Firefox 29,0 and above, click on the menu button
then select Options Preferences on Mac or Linux, or Windows.
- In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
- In Firefox 29,0 and above, click on the menu button
- In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
- You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
- Now restart Firefox and see if the problems persist.
In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:
This solve your problems? Please report to us!
Thank you.
- Open the Firefox Options (Preferences on Mac or Linux) as follows:
-
my computer reads that sound out of the left speaker, how to fix this?
I have the impression that the panoramic L/R is off but don't know how to fix it. It's not just at the point where I play sound from my computer, but when I plug small. where can I find panoramic options? or whatever else might be needed to solve this problem? It is a Windows 7, has always been and its lenovo. Thank you!!
Hi Ryan,
I would recommend going back to the basics.
You have removed realtec and you currently use generic windows drivers correct?
The sound card is on the motherboard, or installed on his own card?
If she has her own card he dethrone (while the system is off) then reposition the map making is secure
Once you determine that several otherwise work speakers/headphones have this same question, then pointing to a hardware failure.
b Eddie -
I just uploaded the site via the built in ftp upload in muse he then uploaded successfully. When I go in the edition of the browser and enter the name of the site (mernaliddawi.com) it says then this "there was a problem reading the file of Adobe Muse CC manifest for the site. Since Adobe Muse CC use file > load on the FTP host... to export the new site. ' I then exported the site again, but it still does not work also, I went my hosting provider file manager and deleted the file muse_mainfest.xml and then re uploaded still no chance. " How can I fix this thank you, james.
You need to transfer your domain to your new site. At present, the URL http://mernaliddawi.com/ is a web page that encapsulates the http://mernaliddawicom.ipage.com/ in a frameset. This isn't how a domain is successfully transferred. He doesn't bother with editing in the browser, will prevent redirection to versions Tablet and phone of your site (if you create), and can cause other problems.
If you enter mernaliddawicom.ipage.com to inbrowserediting.adobe.com it will not work, because this is the URL where your site is currently hosted.
-
My computer will not delete emails in my Outlook Express, how to fix this?
I hope you can help!
You have corruption of dbx files.Spend most of your messages out of the Inbox and move the messages you want to record off deleted items, and sent items. Locate the OE message store and then close OE.Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.With OE closed, find the Deleted Items.dbx and Sent Items.dbx files and delete them. New files will be created automatically when you open OE.Compact all folders as described below.To avoid this in the future:Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.Information on the maximum size of the .dbx files that are used by Outlook Express:
http://support.Microsoft.com/?kbid=903095After you're done, followed by compacting your folders manually while working * off * and do it often.Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3 -
Scan is great for downloading. How to fix this?
"pdf is greater than 2 MB.» Cannot accept! I am new to scanning. Boss just bought office. I have connected my desktop & another office to wireless technology. After a few days of trying to figure out how resize file, without success. I read something to the effect that "devie's the dierectly connected to the computer. so I plugged cable for printer & my office this morning, still won't let me not resize file.
If you have the full features software package installed, you can enter the solution Center. Then go to settings (the key at the bottom of the screen)
Choose the scanning settings
then choose "manage shortcuts Scan.
There is a button labeled 'Advanced Document Settings', you can click this button and lower the output resolution, which will reduce the size of the file.
-
Hi, I have a macbook 13 "retina pro and for some reason any when I try to plug in my external hard drive or a computer SD cards don't regencies them because they do not open on my screen. Does anyone know how to fix this?
Have you looked in the Finder?
-
Outer island, I have installed does not appear in 'my computer '. It has been configured for mac. How can I get that back to windows 7
What device?
It appears in the Windows Device Manager?
-
my computer is the signature with a temporary profile and I can't access any of my files how to fix this?
Hello
Please post in the forums for your version of Windows.
Ask a question in a select Technical Forum here appropriate injector:
Microsoft Community - Forums
http://answers.Microsoft.com/en-usPlease provide all the information we need to help us help you.
How to ask a question
http://support.Microsoft.com/kb/555375=================================
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.
Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in
Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 - free methods system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty to a Vista - corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileDifficulty to a corrupt user - Windows 7 profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.
When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.someone has a better solution that take care of this problem.Hello
Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:
http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx
Hope the above information is helpful.
-
whenever I shut my computer down I have to type f1 & esc to start, how to fix this?
whenever I shut my computer down I have to type f1 & esc to start, how to fix this?
Hi tonimiller1986,
· What is the number and the model of the computer?
If you are using a portable computer, make sure that your laptop battery is charged and/or the power supply is correct. If the problem is not with the power supply while the issue might be with the BIOS. You can get in contact with the manufacturing system to get the updated BIOS update or reset to default values and check if it helps.
Caution:
- Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.
- BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.
I hope this helps.
-
Installed a new wireless router for my XP laptop and connected the router on my Windows 7 desktop. The Office has never gave me the chance to enter a network name or the password and came as 'unidentified network '. I can now access the internet does anyone know how to fix this?
I finally found the problem after being on the phone with the century technology link for 3 hours. My network card was bad, even though my computer told me it was working properly... I yi yi
-
Hey I lost my ios for my macbook how to fix
Hey I lost my ios for my macbook how to fix or install ios
You have a Macbook, but you've posted in the forum for desktop - I asked guests to move it on the forum of Macbook.
Your Macbook does not run iOS - it is for iPhones and iPads. I guess that say you you have damaged your operating system somehow, OSX - is that correct? This Apple help page explains how to reinstall your system:
-
When I copy something, my computer is no longer scrolls. How to fix this?
When I select an article that goes beyond what is on the screen, my computer is no longer scrolls down. I have changed a setting... How to fix this?
Hello
- You did any recent changes?
- This happens when you're online?
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
Method 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/310353
NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
Maybe you are looking for
-
Windows Defender service does not start on Windows 7
On my laptop, Windows Defender is no longer in effect. Reads the message: the service does not start. When I manually try to start the Defender, the massage is: file not found!I can't remove Defender another upodate no longer works. Someone knows a s
-
How the auto rename teststep loop
Hello in the sequence attached, I rename a teststep in a loop. The new stepname should be the former stepname + a prefix which is the loopcounter So former name is: 123 New names should be loop: 1-123 loop: 2-123 loop: 3-123 But the sequence creates:
-
HPE h8-1300z AMD (AG2) CTO: Question of BIOS
I see this in the UEFI BIOS firmware updates but it's very vague on what it actually is about: -.
-
Windows Update error number: 0 x 80248015
I have problems to download/install updates to Windows. I tried every fix I can think of and nothing works. This is the story of what I did. It is a new installation of Windows XP SP2 virtual machine. Here are the steps I've done (the first 3 are
-
my computer started to show 'blocked startup programs' in the systray clock.
I am beyond my capabilities here. I don't know why this started happening or how stop/fix it. Programs include: Microsoft Windows operating system Microsoft Windows operating system Malwarebytes' anti-malware NVIDIA Windows 7 Displey 186.44 Companti