My computer must be enabled for scheduled scans start?

Similar Questions

• My computer takes much longer for the initial start as before?

  Original title: startup

  my computer takes much longer for the initial start as before?

  I suggest to do the following:

  (1) Windows Update and install all updates

  (2) run disk clean up and defragnment

  Check disk run 3)

  Check 4) Add/Remove programs and uninstall programs you want

  (5) run full system scan, with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  You can also take a look at:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• virus scan:-"computer on or off, for the scan to take place?

  In Microsoft Security Essentials

  -Run a scan scheduled... ticked,

  Scan type... Full scan... ticked,

  When... Sunday... Checked,

  Around... 02:00... checked,

  Search for the latest viruses... Checked,

  «Start the scheduled scan uniquementlorsque my computer is turned on but not used?.»

  My question is-, run a scan scheduled on my computer on a Sunday at 2.00 AM should the computer be left for this analysis to occur?  Or he access my computer and perform the task when it is off? Enlighten me please

  The computer must be "on".

  Suggest that you consider the following:

  Checklist for installation of Microsoft Security Essentials

• must be enabled for app repellent ultrasonic ringtone work?

  Hello

  I would be grateful for any help on my question:

  (I just downloaded the application of repellent to ultrasound, by)

  Alexandr-balyberdin and absolutely can not find the answer anywhere!)

  I need to know if I have the ringer turned on in order to get this app

  to work (to repel rodents by ultrasound).

  I'd rather have the app on all night, to keep the rat away, but do not

  you want to be bothered by people who call while I'm asleep.

  I would also like to know if this application works even when a creature is already

  estalished its nest, (to fend off not only her, but actually do leave.)

  Thank you!

  He is not an Apple product. Better that you ask the developer of the application.

• What dependency service or group must be enabled for ICS start the firewall can be turned on

  Uninstalled BitDefender 2012 and installed Microsoft Security Essentials.  I tried to activate Windows Firewall and got: "Windows Firewall setting cannot be displayed because the associated service is not running. You want to start the Windows Firewall / ICS (ICS) service. Press Yes and I get Windows cannot start the Windows Firewall / ICS (ICS) service. This option is OK. Hit that and I will return to the window Security Center in Control Panel. Tried to manually turn on ICS and got error 1068: the dependency service or group could start. What service and / or the Group?

  It was more than a notice of an answer to the question I posted earlier to not be able to activate Windows Firewall once I uninstalled Bit Defender and installed MS Essentials.  Sorry that if I crossed all the protocols forum this is my second attempt to get a question an answer, luckly I kind of figured it by myself.  Thanks for the response if and the offer of future assistance.

  I you merge your two threads, but your problem is perhaps due to incomplete removal of BitDefender.

  -steve

• Detected in double FlexSessions based on HTTP, generally due to the remote host disabling session cookies. Session cookies must be enabled for the connection of customer to manage properly.

  Como devo proceed configuracao Weblogic 12 c para para normalizar a down da mensagem acima? POI quando os clients are logando na content a mensagem prosseguir impossibilitando appears.
  Realizei o principle abaixo:

  Connect to the WebLogic administration Console.

  1. Under the Structure of press area click < domain_name >
     
     
  2. Select the tab "Web Applications"
  3. Select "lock and change" in the center of change.
  4. Click on the 'Active cookie Auth' box.
  5. Restart to confirm the changes.

  SEM sucesso!

  O - SO used e o Oracle Linux, a use which flex e este Serviço ja wont.

  Resolvido! Fato nao era no weblogic e nem na generation Java, era not Oracle WEBCache, no Session-binding mechanism recurso.

• What Services should be enabled for Windows 7 with IE 8

  What SERVICES must be enabled for Windows 7 with IE 8.  I am work out WiFi in a remote area and you have activated certain Services to improve my connection and the use of a printer.  Which SERVICES should be on for Windows 7?

  What Windows initially sets up MORE than what you need in order to get features of your computer and its peripherals... nothing else does not count...

• Customer is not able to join WebConf - error message cache must be enabled

  Client with 1.7u45 jre installed was not able to join WebConf today

  customer receives an error

  Unable to launch the application

  cache must be enabled for nativelib or installer-desc support

  Another College for this customer in the same office a Basel connect - so issue that happens on specific PC,

  but I was not able to load the client, the settings must be set

  How can I add screenshots?

  I have two showing the customer error

  -screen_01_WebConf_Connect_trouble. PNG

  -screen_02_WebConf_Connect_trouble. PNG

  -Thank you

  Edith

  Hello

  It looks like it may be duplicated if the following changes are made:

  Disable Java Caching.  Control Panel->Java.  On the General tab, Temporary Internet Files pane, select Settings and untick the 'Keep temporary files on my computer' option.  Clear the Java cache
  

  So to reverse the process - go to the Java application on the Control Panel, select settings osteonecrosis of the general part of temporary Internet files, then check "keep temporary files on my computer". This should hopefully solve the problem.

  Phil

• Essentials of security will run a scheduled scan of the entire system on a computer running Win. XP hibernation

  Essentials of security will run a scheduled scan of the entire system on a computer running windows XP Hibernate

  No scanning is performed in hibernation, standby, sleep, or else that the system is powered off.  You must plan the scan for a time when the PC is running.  MIDI works fine for me.

• Daily schedule scans for Windows Defender.

  I planned my Windows Defender ACCT to do daily, a full scan, at 05:00.  However, I just got a notice that a comprehensive analysis was made for the last 5 days!  Why is this happening?  Thank you.

  Hi Harland,
   
  As you plan the scan at 5:00 every day, the system must be switched on at the scheduled time and allow the analysis to be performed. If the system is turned OFF or the system is shut down during the analysis, we encounter this problem. However, there is a setting that can be applied to the analysis starts automatically when the system boots.
   
  To activate this setting, try the following steps.
  1. Click Start, type taskschd.msc and press to enter.
  2. click on continue in the UAC prompt.
  3. in the right pane, click view, and click Show hidden tasks to check it out. (See screenshot below step 7)
  4. in the left pane, click the arrow on the Task Scheduler Library folder and the folder of Microsoft to develop.
  5. click on the folder of Windows Defender.
  6. in the middle pane, right-click on the MP scheduled Scan list and click Properties.
  7. click on the settings tab.
  8. check the 'run task as soon as possible after a regular departure is missed box."
  NOTE: This will allow Windows Defender perform the scheduled scan the next time you have the computer if the scan is not respected because she is not able to run at the scheduled time.
  9. click on the OK button.
  10. Close Task Scheduler window.
  
  For more information on "Use Windows Defender" check this help link on windows: http://windows.microsoft.com/en-US/windows-vista/Using-Windows-Defender
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Should be activated for scheduled defragmentation defragmentation - my computer work?

  Good afternoon

  Must the computer be activated for the fragmentation of regular work?  Because my schedule is due to run on October 1, 2011 at 22:00

  But that date came and went and nothing happened (my computer was turned off at the time it was supposed to have taken place)

  So I had to do a manual defragmentation.  Help, please.

  Just read some of these posts on defrag and just wondering if the computer must be on the regular operation... no not a big worry.  I always forget what time is scheduled, so I just do it mannualy when I think of it or so slow... seems to help.

  See in any case you're from Wales... would like to go there as shown in my ancestry we were the country of Wales, on my father's side.  A recent past, since the 1960s began researching it.  It shows that we were once fees and lived in a castle there in the early 1600s.  The family emblem... I forgot the name of the castle today.

  In regard to our time and this computer thing, I started late in life also... not knowing anything.  Good enough at home, although sometimes you get frustrated.   I will say, my children are quite impressed by the knowledge that I won.

  Appreciated your comments, of one Welch to another... HA...

• the computer must be on and the windows scan and fax program open to receive a fax?

  I would like to receive faxes at any time - the computer must I be on and windows & scan fax needs to be run to receive a fax?

  I looked through many pages of documentation and the forums and didn't find any reference to this.

  Thanks, Gil

  He probably could if your fax/modem may wake the computer from sleep mode. But you would still have to wonder if the fax send would wait long enough for the PC to detect the ring, wake up and be ready to deal with a fax.

• Device that my for hp photosmart printer b110 series will not scan into my computer it comes up with error scan!

  p photosmart HP b110 series printer will not scan anything on my computer.  The message - try the scan of the computer or documentation - memory to come to the top.  I can't find anything useful in the documentation and I can't find a way to scan the computer.  It was perfectly scanning up to about a week ago.

  Hello

  • What were the changes made before the issue started?
  • What version of Windows operating system do you use?

  You can view these methods:

  Method 1:

  I suggest you try to analyze the file from the following location:
  1. navigate to the folder of C:\program HP imaging\bin location
  2 Locate and double click on hpqsciapp.exe to activate the scanning application.

  Method 2:
  If the steps above fail, I suggest to uninstall and reinstall the drivers from the HP site and see if that helps.
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3944627&LC=en&cc=us&DLC=en&lang=en&cc=us

  To download compatible drivers from the printer manufacturer's website, first see which version of Windows you are using, and then search for compatible drivers.
  1. open system information by clicking the Start button, all programs, Accessories, click System Toolsand then clicking on System Information.
  2. click System summaryand check the name of the operating system and the Type of system to see which version of Windows you are running.
  3. go to the printer manufacturer's website and search for a compatible with your version of Windows printer driver.
  4. follow the instructions on the site to download and install the driver.
  Additional information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Note: These links means on Windows 7.

  See also:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-D110-scan-error/TD-p/370037

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/C6380-scan-error-quot-try-scanning-from-computer-refer-to/TD-p/55905

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-C4780-can-t-scan/TD-p/332577

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/C5580-scan-problems-how-do-I-scan/TD-p/90965

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx

• protection technology of identification made by intel plug-in must be enabled

  "" this plugin came with my mozilla browser in "to activate the mode" must be enabled or not.

  Firefox detects a lot of plugins that is preinstalled on your system...

  Intel claims the identity Protection technology as helping to prevent identity theft by allowing Web sites to identify your computer, which can limit access to other computers if someone learns your username and password:

  http://IPT.Intel.com/home/how-it-works/identity-theft-protection

  Good, but I don't know that many websites use this feature. Is it really useful or they just go to Plan B, as texting you a code?

  If you find a site asking to use the plugin, you would like it to be a website you trust since this identifier doesn't know anything about the integrated Firefox Privacy features (clearing cookies, private browsing, etc.). For this reason, I don't think that "Always enable" is a good idea.