My computer not unable to register to the portal series

Similar Questions

• Computer is unabler to commuincate with the series of printer HP Deskjet 1050 J410

  I just install the printer, I did everything well, because he said, he is ready to use, but I get a message like

  "my computer is unable to communicate with the printer" can someone please tell me what I did wrong and how

  to solve this problem? I can make copies, but I can't print or scan

  Original title: I just install a series of printer HP Deskjet 1050 J410

  Hi Bill,

  -What do you mean "I can make copies, but I can not print, scan or?

  It could be that you have a firewall application installed on your computer that prevents communication with the printer, or perhaps you need to uninstall and reinstall the printer due to corrupt files.

  Step 1

  Initially I suggest you run utility HP Print and Scan of the link doctor and check if this solves the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/en/HHO/IPG/Forum/network_diag/&softwareitem=MP-120776-1

  Step 2

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers to communicate.

  I suggest disable you the Windows Firewall and the antivirus temporarily.

  View items-

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

  Step 3

  You can try to update the latest version of the printer drivers and see if it helps:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodSeriesId=4027462

  Step 4

  Uninstall and reinstall the printer and check if it helps.

  Add or remove a printer

  (Also applies to Windows 7)

  For your reference:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I'm not able to register for the warranty

  Hello!

  That is what it is?
  I was not able to register for warranty within a period of 1 month, I wan tot register, but it is expired.
  What should I do? Please I need help

  Hello

  A guy in this forum has similar problem so here is my answer for him and I hope that this will also help you:

  I put t know what the problem is here, but you can clarify this with Toshiba directly. Contact Toshiba people under [email protected] and explain the situation as a whole.
  Be sure to send all relevant information on your laptop as the name of model of laptop, model number, serial number, date of purchase and also your name and address.

  Good luck.

• New computer, not Windows XP loading beyond the background of the desktop after installing Kaspersky. Help!

  I have a brand new computer running on Windows XP home.  I started to fall last night, and it worked very well.  I installed Kaspersky Anti-Virus 2009 disc (and then I think that you download the latest version from the Web site).  After installation finished, he asked me to restart the computer I did, and since then Windows does not load correctly.  All I can get is the paper painted, no icons or taskbar.  He is not fixed, however, as the mouse moves, and if I right click I get a very limited number of options, including for office properties and properties of nVidia, however none of these options will load up.

  I tried to start the computer in safe mode so that I can uninstall Kaspersky, but I tried many pressing F8 on boot the system and it will not give me anything.

  I don't have a Windows disk as the software came on the computer, but I don't have the key.

  What can I do?  Help, please.

  Thank you
  Natalie

  Given that you can get into Windows, at the level of the Office try Ctrl-Alt-Del to get the Task Manager. Choose 'New task' and in the resulting box type: appwiz.cpl [OK]. This should appear in Add/Remove Programs, you can uninstall Kaspersky. Kaspersky is a good antivirus, but from my experience it does not sit well with some computers. After graduating to remove, use something else. I recommend (trade) of NOD32, Avast or Avira (free versions available).

  If the above doesn't work for you, call the Kaspersky technical support.
  MS - MVP - Elephant Boy computers - don't panic!

• Already registered on the portal OnPlus - cannot add a device already enabled/customer

  Hello

  I am registered on OnPlus.

  Then my colleague registered and activated a device.

  I could not activate the device - even if my PC is on the same subnet and can connect to it very well (with the password provided by my colleague).

  When he sends me an invitation for the device - it takes me to the registration page.

  If I get my information from record (again) - I get (not surprisingly)...

  "We had a problem with your submission. Please correct the following errors. This user ID is already registered. »

  Still-, there is no choice because "I am already registered.

  When I connect OnPlus and try to "Add Customer" - I put in the details, then it goes to the activation screen with

  "CustomerX / status".

  To activate this client:

  Install the Agent network OnPlus on the premises of the customer and connect it to the LAN client.

  Turn the Network Agent OnPlus the switch zipper on the back panel of the Network Agent OnPlus.

  If your computer is connected to the same network as the network OnPlus Agent, click on the button activate now below.

  Otherwise, follow the instructions for activation in the guide getting started for the Cisco OnPlus Network Agent.

  Activation for this customer information are:

  Activation ID:... »

  If I click on activate it says

  "Unable to determine a local IP address for all Agent OnPlus of network into your current network.

  Check that the Network Agent OnPlus is connected to the same local network as this browser. OnPlus Network Agent must be on the same public WAN IP address (203.25.x.x) in your web browser block current.

  Not enabled OnPlus network Agents will attempt to disseminate their IP up to 30 minutes and if successful will appear here for 4 hours. Try to stop power OnPlus Network Agent if it has been online for more than 30 minutes.

  Verify that the DHCP service is running on the local network so that network OnPlus Agent is able to acquire an IP via DHCP. You will be able to change Agent of the OnPlus network to use a static IP address if you choose to (recommended), but the DHCP service is required to access the Network Agent OnPlus start.

  Ensure that DHCP clients can route to the Internet.

  If the Network Agent OnPlus hosting site has multiple WAN paths to the Internet, try refreshing this page. Your browser must Access this page from the IP WAN as the Agent of OnPlus network address. »

  We even tried power cycling it, and I'm definitely on the same subnet.

  There was no possibility of entering an IP address no matter where manually - process regarding the "Impossible to determine an IP address local for all Agent OnPlus network on your current network."

  I ping the device and even connect to its graphical interface. It simply does not appear as any way to add this unit to my own account on the portal OnPlus.

  That please?

  Hello Brett.

  The On100 device can be associated with a single customer and a customer cannot exist in more than one Agent account. From your description, I understand that your colleague registered as a OnPlus Agent, created an account customer, and then active the On100 device under this new client.

  However, it is possible for you to have access to the customer site by becoming a sub-agent under account OnPlus Agent of your colleague.  And according to the description above, it seems that your colleague has already sent you an invitation to become a subagent.  The problem now is that you have previously registered your EAC as OnPlus Agent id.  It is not possible for a single CCE id or an Agent and a secondary agent in the OnPlus portal.

  To allow your registration as sub-agent, we remove your EAC to your portal id.  It is a manual step that I am happy to help you.  Simply unicast your Agent account information to [email protected] / * / .  Once I take off your CEC id you will be OK to complete the registration of subagent.

  Here's some more information about the creation of the sub-agents in the portal OnPlus.  A previous post jamwyatt courtesy of response:

  In the account that contains the Agent network ON100, you can add other agents, on invitation. On the overview page, there is a menu agent at the top that will allow you to invite the officers. Once you invite an agent, and they sign up, they will be able to see the same view you see. The design intent is that you set up a master account for your business, then you invite other employees and contractors to adhere as agents of this account. Each guest will need a Cisco ID and once that they sign up, they will have to be approved by the owner of the main account (same menu agent, selection "of Agents in waiting"). Using this approach, the owner of the company retains the main account and allows you to manage completely all agents.

  Kind regards

  -r.

• Internet - unable to connect to the proxy serer connection issues

  I have two problems, which could well be related.  Equipped with Vista.  Firefox running, all of a sudden a site using java wouldn't work.  I tried the automatic installation of Java, it has failed.  I tried the manual installation and said "Setup cannot continue with the current internet connection settings" (which is not one of the error messages shown on the help that is aimed at page).

  I decided to try to do it through IE.  It is not connect to the web at all (not Opera).  When I tried the link diagnose, I think once it says "unable to connect to the proxy server" well this time he said www.google.com is not set up to establish a connection on the port world wide web (http) service on this computer.

  Can you help me with, or ideally for both - if they are not conneccted - problem.  Thank you.

  Hello
  Let me assure you that I am on the same page here.
  1. you can get online via Firefox, but not with any other browser?
  What happens if you try to connect without a browser... just use the connection to connect before you open a browser?
  Was there anything added/removed before it began?
  Have you run an anti-virus and anti-malware scans?

  Also try:
  http://support.Microsoft.com/kb/937151
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-proxy-settings-in-Internet-Explorer
  hope this helps,
  B Eddie

• With this update my computer not turn off. Clears the screen, but this is all about.

  This computer is the new 12-inch mac that came out this spring.when I've updated about a month ago, it would not turn off. I got tired of hold down the b power button to turn it off. I returned it for a back earlier upward. It automatically updated again and here I am in the same disorder. I think I'll just close the lid and stop worrying in this regard.

  Stop your Mac. Use the power button if you wish. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of staff. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

  If the problem comes back after a reboot, you have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find bad.

• Computer "not responding" when I connect the external hard drive.

  Hi all

  When I connect my external hard drive to my laptop, it is detected and the icon for the material appears in the taskbar background. But when I go to my computer, it happens that does not. I can always open other programs etc that are not related to the hard drive, but nothing to do with the hard drive "fails". As soon as I plug it on, the laptop starts responding again. I tried it on another laptop and the same thing happens.

  Any ideas?

  Hi Wendall81,

  -How long have you had this problem?

  Follow the steps below:

  Method 1:

   

  Step 1: Boot in safe mode and check if the problem persists.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

   

  Run a check disk on the external hard drive.

  For instructions, see check your drive for errors .

  Note: If any bad sectors are found by running the check disk utility and recovery of the attempt of bad sectors option is checked when checking the disk for errors, data in the bad sector can be lost as they tried to recover bad sectors. Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Computer not finding networks, stuck on the Logging Off screen in Vista

  For the past two weeks, if I simply close my laptop while it is running, most of the time when I try to open it up my wireless network does not connect automatically. I have to click 'Connect to' in my Start menu and manually connect to the network. The only problem is, sometimes it will fail to find a network and when I try to manually go to 'Connect to', it does nothing. Nothing comes up at all. I have to restart my computer. Once I try to restart, it sticks on the screen "Logging Off". I also tried to disconnect just opened a session back, but it's still stuck on this screen. I am then forced to make a hard closed down by holding down the power button.

  Any ideas?

  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Hello
   
  1. you broadcast the SSID of the wireless network?
  2. have you idea of changing the settings of the preferred wireless networks?
   
  Method 1.
  Try to change the order in which your computer connects to the network.
  The list of networks connected to before is sometimes referred to as your preferred wireless networks or your preferred list.
  a. open manage wireless networks by clicking the Start button, click Control Panel, click Network and Internet, click Network and sharing Center, and then, in the left pane, click on manage wireless networks.
  b. your saved wireless networks is displayed. To change the order in which your computer connects to networks, drag the networks upwards or downwards in the list.
  c. to change preferences for the network, right-click the network, and then click Properties.
   
  Method 2.
  Also, check out the articles below and check.
  http://TechNet.Microsoft.com/en-us/library/bb726942.aspx
  http://support.Microsoft.com/default.aspx/KB/929661
  
  Method 3.
  Also the question of trial in the State of clean boot and check. You can also check the shutdown problems in the boot.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
  Method 4.
  Also check the eventviewer on stop error logs.
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why the host computer is unable to connect to the smart camera on the network?

  My smart camera of NOR-1772 was connected to our network and functioning as a target to a host computer.  The two are running VBAI 2011.  The camera has been moved to another location on the network and another computer is used as the host? The host is connected to the wireless network.  The camera works fine when connected directly to the back of the computer.  Thank you.

  Hi Joel,

  Yes, it makes sense.  I noticed a corellation when I am set up and where I lose the connection.

  Thank you.

  Rob

• I have Windows Xp & have A HDMI cable connecting Tv.When computer not reading a DVD on the computer, good picture & sound BUT on Tv good picture BUT none her WHY? Darryl

  I have Windows XP.
  I have a HDMI cable from the computer to the Tv.I can control the computer through television, if I plug Tv on HDMI2
  When playing a DVD in the computer, I get good picture & sound on computer, BUT on the Tv I hear good picture BUT NO
  Can you please help

  Hello

  I suggest go to control panel - sound and HDMI from default and check if it helps.

  Also, try to update the latest drivers for the sound card and check if it helps:

  http://support.Microsoft.com/kb/283658

  It will be useful.

• BlackBerry smartphones I have loaded the Desktop Software 4.5 on my computer - not able to load on the BB 8310

  Hello:

  I went on the Blackberry site and loaded the carrier ATT page software, Desktop software, it's on my computer, but when I plug my BB I can still see the white screen with JVM 513 error and the Director of office gives me again - no request is available.  How can I get the software to reload on my BB 8310.

  Please help, I don't want another phone, I like this one.

  Thank you

  Ladylaresa67

  Can be accessed through this site

  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

• Why can I not select accounts registered in the lists of authentication?

  I have many saved passwords on different sites and each of these sites, that some accounts so I usually I would double click the ID field and select the account with that I want to connect, and it could automatically fill in the fields ID and PW. Now when I double-click on the accounts and nothing happens on any of the sites. What can I do to regain this ability because it's really annoying... Help, please

  It worked but I also had to delete these folders:
  C:/users/XXXXX/AppData/Local/Mozilla
  C:/users/XXXXX/AppData/Roaming/Mozilla
  Then I reinstalled Mozilla and now it is back to normal.
  Thank you for your help.

• Unable to connect to the portal W450

  I tried to access the Motorola support on the inability of my camera to connect to the internet and create a Motocast ID. He is now even give me error messages, and Motocast is not put on more when I plug it into my computer. I do not have that would have to buy a TV and various other unnecessary things to get a package of a wi - fi connection, so I use a dongle for my wireless internet. I'm really unhappy with the service from Motorola and the fact that they have published an excellent idea, until it's truly ready to be used.

  Should I send the thing back and ask my money to spend on a much less expensive iPod nano? I want to just get in shape without having to carry everything whenever I go out an execution - the W450 would be ideal for this and promises a lot, but this title lets you down when he can actually deliver what he says he can.

  Motorola is making me a sad panda

  • Edited the title to ensure that the right help find you.
  
  

• SD Bluetooth 2 and not able to connect to the port series on pocket PC

  Software Bluetooth version 4.01 OS Pocketpc 2002

  Everything works well, you can see the discovered device, but the status is ´not connected´ from the following Web page, it is possible to connect; http://www.TomTom.com/support/index.PHP?language=5&query=Toshiba&FID=334

  but this option is not available, no idea how to get connected GPS!

  Dnloaded and tried version 1.0, but the sd card is not valid

  Thank you very much.

  Hello

  What Toshiba PocketPc do you have?