My computer seems often quite slow to startup or closing down. He often asks me to start repair!
My computer seems often quite slow to startup or closing down. However, recently I have problems starting, it. He often asks me to start repair. It is a common problem for Vista and how can it be solved?
Hello
· Have you tried repair system running on the computer?
· Are you able to boot on Windows?
· You get the error message?
· Were there recent changes made on the computer before the show?
Follow these methods and check if that helps.
Method 1:
Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. I suggest you to run the Startup Repair tool.
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
Method 2:
Step 1:
Check if you have the similar problem in Safe Mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
Follow the article to perform the clean boot on the computer:
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135
Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.
Method 3:
I suggest to follow the steps described in the article and check if this can help resolve the issue:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Tags: Windows
Similar Questions
-
How to improve the performance of the computer which is very slow at startup in Vista?
WOT programs I need to run at startup my slow cam of computers verry because someone helpRemember - this is a public forum so never post private information such as numbers of mail or telephone!
WOT programs I need to run at startup because it takes 7 to 10 minutes to get running?
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Saturday, may 29, 2010, 11:46:15 + 0000, dave wilson332010 wrote:> full throttle programs do I need to run at startup because my computer verry slow cam, someone helpEveryone is different and has different needs and different desires.There are * no. * programs that everyone should run. See below forTips on what you should maybe stop start automatically,But first of all to consider the possibility that your problem with what he isslowly maybe nothing to do with what starts automatically.Perhaps the most common performance issue of today is malwareinfection and the first thing you should do is be sure that you are notinfected. So, what anti-virus and anti-spyware programs run, andIf they are updated?Once you talked about this question and that is rid of allMalware or get assured that you are not infected, you can addressthe issue of automatic startup programs:First of all, note that you should be in * all * programs thatstarts automatically, not only those who enter in the system tray.Not all the programs auto-start manifesting by an icon in theStatus bar.On each program, you don't want to automatically start, check itsOptions to see if he has the choice of not start (make sure you)Indeed choose not to run, not just a "don't show icon.Optional). Many can easily and better be arrested like that. If that is notwork, run MSCONFIG from the start. Run the line, and then click the Startup tab.Uncheck the programs that you do not want to automatically start.However, if I were you, I wouldn't do it just for the application ofthe minimum number of running programs. Despite what many people sayyou, you should be concerned, not with the way * a lot * of these programsyou run, but * that *. Some of them can degrade performance severely, butothers have no effect on performance.Don't stop all programs to run willy-nilly. What you need to dois to determine what each program is, what its value is up to you whichthe performance cost is its running all the time. You can tryInternet search and ask questions about the details here.Once you have this information, you can make a smart informeddecision on what you want to keep and what you want to get rid of.Ken Blake, Microsoft MVP (Windows desktop experience) since 2003Ken Blake
-
My computer does not turn off, it crashes on closing.
My computer does not turn off, it crashes on closing. I have to press the Start button, in the hold, and then after 20 seconds it turns off. Often when I turn on the next time, it sometimes says Windows is not stopped successfully, but I know that all my programs had been closed.
My computer is Dell and my package is Windows Vista. I have McAfee security set up and I bought Uniblue to try to help, but not joy.
I wouldn't use anything done by Uniblue, it does not work. It will make things worse.
I would like to uninstall Mcafee, and then use the removal tool to remove it completely. Install rather program AV from Microsoft.
If you need help I see what is running with teamviewer. You'll see what I'm doing. If you get this, give me the ID and the password. So I can log in. Or if you use Skype, add me. My Skype name is the same name I use here
-
Every day my computer seems slower, what should I do?
every day my computer seems slower, what should I do?
Hi Rebecca,.Your computer may be infected by a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guideIt contains instructions which will remove most malware infections. I hope this helps you.-Brian -
My MBP 2012 gets very hot on the bottom on occasion. He also seems to be slow at times especially at the beginning of the session. I ran a check and here's what I got back 11/4HDD/40000000 SATA (0,0). Any help on what's going on?
a quick search brings us to recent threads = the essential so that "SSD or related connection.
Mac Laptops: Apple Hardware Test may report alert 'HDD' - Apple Support
...
... If the message in addition to the other problems related to the drive to solid state (SSD) or Flash storage disk, go to an Apple Retail Store or contact Apple's Service Providerwith the computer.
...
-
When I tried to fix this using other threads, none worked any other suggestions?
Original title: your computer seems to be configured correctly, but the device or resource (DNS server) is not responding. I tried all of the solutions none works
Hello
This problem is limited to a specific Web site or with everyone?You can approach this problem in two ways: first by simply disabling the cache, but also by restarting DNS client service, which manages the cached DNS queries.
Method 1: Clear DNS Cachea. click Startand type cmd in the Start search box.
b. right click on cmd in the list programs, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
c. at the command prompt, type the following line and press ENTER:
ipconfig/flushdns
Usually, it clears up any issue that may occur.
Method 2: Restart the Service DNS Servicesa. Click Start and run, type services.msc, and then click OK.
b. double-click the DNS Client service. If you receive a Configuration Manager message, click OK.
c. in the Startup Type list, click on restart and then click OK.
d. close Services.
e. restart the computer.
Method 3: Configure the connection to obtain an IP address automaticallya. click on 'Start', enter "NCPA. CPL' (without the quotes) in the search bar and press "Enter."
b. right-click on the network connection, and then click on 'Properties'. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. click on select 'Internet Version 6 (TCP/IPv6) Protocol' and then click 'Properties' of .
d. Select "obtain an IP automatically" and "DNS server automatically get an address.e. click 'OK'.
f. highlight "Protocol Version 4 (TCP/IPv4) Internet" and click on "Properties". "" "
g. Select "obtain an IP automatically" and "DNS server automatically get an address.
h. click on 'OK'.
i. restart the computer.
See also:
Why I can't connect to the Internet? http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
-
Windows System performance Windows 7 runs slow at startup
Windows 7 ultimate HP, I ran the fix tool but still slow at startup.
Moved from feedback
Original title: % u201cSystem % u201d performance Windows
Hi Miclewis,
1 Microsoft Fix it do you try to run?
2 has there been any changes made on the computer before the show?
Method 1:
I suggest you to refer to the article for slow startup problem and check if it helps:
Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2
http://support.Microsoft.com/kb/977419
Method 2:
You may also refer to the article and try to optimize Windows 7:
Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
-
My computer is running really slow and guard same gel if I double click, it will do. I have windows 7 for home.
Hello
References to Vista also apply to Windows 7.
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
My computer crashes often enough, how can I avoid this?
My computer crashes often enough. Is there something I can do to prevent this?
HelloFollow the steps described in this guide: http://www.selectrealsecurity.com/slow-computer/It provides simple instructions on how to speed up a slow computer. If you have any questions, just ask.Brian -
Satellite C6070D-10W works quite slow
TOSHIBA SATELLITE C6070D-10w works quite slowly.
(1) my brand new laptop with factory installed windows 7 and all the programs by nothing added Toshiba shows 100% CPU usage in the task Manager and works quite slowly. The sum of 80 strange process in the Task Manager is never more than 30 to 50%, but the key is always 100%.
(2) I've updated memory + 2 GB so now it's all 4 GB DD3 1333
(3) I update new BIOS
(4) when is with adapter work with 1500 MHz CPU when I take off the laptop adapter cable is working with 700-750 MHZ CPU tested with CPU - Z
(5) I installed the new OS installed windows 7 Ultimate Service Pack 1 64-bit + all drivers for Windows 7 64 - bit Sound, chipsed, VGA... without anti-virus software, disable Microsoft Update I just use Google Chrome when I go to YouTube to see the 360 p video it's normal work but when I change 480 p arrive end 720pHD and 1080pHD interrupted course of works quite slow.
In my opinion it's problem with hardware with the processor AMD APU E - 240 with technique of AMD Radeon HD 6310 of Factory graphics card problem or where is the problem?
Hello
It is not easy to discuss this theme, although you can find many discussions about similar problems. I would like to have your laptop in front of me, optimize the operating system preinstalled on my way and check how it works.
In my opinion, the best option is its use of original OS preinstalled with specific modification and optimization. Why? Recovery image contains all the necessary drivers so hardware will work with maximum efficiency. All the rest is individual OS configuration. To be clear, the recovery image contains a lot of useless things you can delete the system; You must also change the start option and disable the beginning of all things, you don't need.
Upgrade of RAM has been very good decision, I just hope you bought the module of high quality for the upgrade.
When you test video performance try using diet plan high performance.
-
the software on the remote computer seems to be incompatible with this version of screen sharing
Hello
I use Apple Remote Desktop (see 3.8) to a MacBook Pro 15 of the retina to access an iMAC 27 5 k. I get the following error message
"Connection failed for 'iMac_5K'.
The software on the remote computer seems to be incompatible with this version of screen sharing.
MacBook pro screen resolution is 1920 x 1200
the iMac 5K resolution is 3200 x 1800
Thank you!
Hemdani
What is your question? The message seems pretty clear...
-
Everyone,
I'm trying to configure the WIndows server. I am running the following: Windows Server 2012 R2 Foundation.
I did the following:
1. I crossed the Config Wizard on domain Active Services and installed it.
2 then I joined the field. When I reboot the server, I get the following error:
A. "your computer seems to be configured correctly, but the unit or".
"resources (DNS server) is not responding.
A1. When I put a static IP address on DNS, I can't go to the Internet. Even if
I can go to the tank and the PING of the IP address and everything is good.
A2. The I change the DNS to get the IP address automatically. Then I can get to
the fine of the internet, but I still get the same message about a problem with the
DNS server.
Can someone guide me please what the issue is here? Thanks in advance.
3. Furthermore, I can't see the new server name/information when I go into Windows Explorer
as part of the network.
A. I'll go in Windows Explorer and see the other machines when I look at the network level. Yet,.
for the that set up simply, I can't find it, please help.
Thanks in advance.
Jerry
Hi Jerry,
I would like you to post your question in the forums TechNet for assistance:
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
I hope this helps.
-
My computer seems to be not very hot lately. What should I do?
I had questions 'freeze' screen lately and the bottom of my
computer seems to be very hot, what could be and what can do?
The inside must be dusted regularly semi. The system overheating very quickly will be a build-up of dust. Is this a desktop or a laptop?
-
I AM UPDATING MY COMPUTER AS OFTEN AS I CAN AND IT CROSSES THE PROSSES TOGETHER AND AT THE END IT SAYS UPDATE FAILD WHY? WHAT SHOULD I DO TO FIX THIS
Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.
How to fix Windows Update, Microsoft Update and Windows Server Update Services installation issues:
http://support.Microsoft.com/kb/9066021. see the "need help?" Tell us what problem you are having"section of http://support.microsoft.com/ph/6527
2. you cannot install some programs or updates
http://support.Microsoft.com/kb/8227983. check your WindowsUpdate.log (% windir%\WindowsUpdate.log) to find errors associated with the download/install.
How to read the WindowsUpdate.log file
http://support.Microsoft.com/kb/9020933 b. errors compared to those listed here: http://www.bleepingcomputer.com/blogs/mowgreen/index.php?showentry=1122 or go tohttp://windowsupdate.microsoft.com > click on help and Support link in the left pane > solve problems on your own.
================
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058================
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title: is there a way to know if my copy of windows is missing files, etc?
My computer seems to do a lot of thinking before running each statement checked upload / speed download, everything is fast, must be my corrupts, could be operational with missing or damaged files, anyway to check?
Hello
- Are you referring to the performance of the computer?
- What antivirus application do you use?
I suggest you try these methods and check the status of the issue.
Method 1:
Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
Method 2:
I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.
You can also refer to:
Maintenance tasks that improve performance.
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance
Maybe you are looking for
-
Basically, I guess when you go full screen mode, tabs and the search bar should hide automatically until I move my mouse to the top of the screen to the right? Well, this does not happen despite try the suggestions on other threads for example right
-
Re: Satellite C660 - 1 CL-wireless button do not work running 8.1 Win
Hello my wireless button does not work. I have windows installed 8.1,I have vap and installed flash cards and still does not. Any suggestion?
-
Satellite A500-11U - bars on the screen
I have a problem with my Satellite A500 11U display. All of a sudden it has stopped working, displaying bars on the screen. Can someone tell me what is the problem, I need to replace? I thought that I need to replace the video cable lcd, I don't thin
-
HP SimpleSave HD hpmd1000h: HPSimpleSave in Windows 10
I've been a successful user of the system external HD HP SimpleSave backup. After recently installing Windows 10 improvement of 8.1, I just discovered that the system does not work and seems to have been disabled on Windows 10 irreversably. He has be
-
Set to automatic update has affected my iTunes software
My PC recently received a big aut-update to Windows 7. When it is installed, my iTunes software has stopped working. Double-clicking the icon has no effect (beyond see the hourglass - now the circle - appear for a short period). I have uninstalled a