'My computer' very slow to recognize all readers

Similar Questions

• Re: My Qosmio F60 - 11f is VERY SLOW and stuck all the time

  Hi everyone :)

  I have a qosmio f60 - 11f with 2.26 to 3.3 with turbo i7
  6 GB of Ram
  640 GB HHD
  1 GB Nvidia GT330M graphics

  the problem is that since I bought it and its slow I don't know why!
  Now the laptop over 14 months and I did a lot of recovery time because of problems and stuck, I him.
  last day I did the cover and I noticed that the laptop is becoming slower!
  It takes about 5 minutes to get started! not only that, after started and open any folder you will notice how slow it is. Even in the videos I can't open it because the laptop will be stuck and play the video very very slow!
  Please help me.

  Hello

  First of all I recommend to check the HARD disk for disk failure HARD errors that may affect the performance of the computer, you should check the HARD drive using freeware tools one of the tools that I use is the Drive Fitness Test he has been published several times here in the forum and its really great software.

  If the HARD drive would be ok and if no error would be detected, then, I recommend disabling some processes that are not important for you in many cases different tools would be charged during the OS start process and these tools run in the background that slow down the operating system.
  Run msconfig and check the Startup tab
  Here you will see all the programs that are loaded at the beginning, you can uncheck the tools is not necessary

  Note: If you are not sure what means the only process, use google and search in internet for more details otherwise don't disable this.

• The process APPNOS and APPTS are devouring my RAM and make my computer very slow.

  Hello, I have an iMac (late 2012) 2.7 Ghz intel core i5 with 8 GB of RAM. Lately, my computer has been extremely slow and almost unusable for the last 4 days. After repeatedly to close the market and stop, I finally could open the activity monitor after about 25 minutes of loading. I was shocked to see that the process APPNOS and APPTS consumed 13 GB of RAM each, with a total of 27 GB of RAM used even if my computer has only 8 GB of RAM. I left the two processes of strength and my computer still worked once, normal, but these processes continue to pour every time my computer sleeps. I hope that someone knows what these processes are and how they arise or eat more RAM that I stop.

  For what it's worth, update macOS Sierra from El Capitan did nothing.

  Thank you

  NMitchem

  You have inadvertently installed adware. You don't need to download or install anything to fix.

  Navigate to the following folder and display its content in a screenshot.

  ~/Library/LaunchAgents

  To open this folder, copy the above line and Paste in the menu to go to the Finder > go to folder... field. It should look like this:

  

  Take a screenshot showing the contents of the folder and post in a reply. To take a screenshot read annex of the following user Tip: write an effective communities of Apple support question.

  There will be additional instructions to follow.

  For a description of how this can happen, how to avoid it in the future, and to the actions recommended Apple read How to install adware.

  Check your settings for call control: OS X: all-Gatekeeper - Apple Support. Gatekeeper is designed to prevent you from installing software of garbage inadvertently.

• Firefox becomes very slow with the all new Yahoo Mail

  Problems with the all-new Yahoo! Mail version: everything worked very well, but since the two latest updates of Firefox I started to notice that Yahoo was consuming a lot of CPU (it varies from 35% to 40% and is on the top list of programs CPU consumption) and the browsing experience is not so pleasant - slow. If I quit Firefox and reopen it, becomes faster, but after about 30 min slow / high CPU consumption again. Then I had to go back to the classic version of Yahoo Mail and everything works fine and consumed less CPU. Did I live it? Is it a question of Yahoo Mail? Is there a solution? (Macbook Pro early 2011 / Mac OS X 10.7.4 / Firefox 12.0) Thank you!

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.

• New computer, very slow.

  I just got a computer as a gift. It was bought outside a person so I don't know that anything, except that it's a windows 8. We have done a factory reset to get its stuff on it and only put Netflix on it. It was slow at first. Took the time to load anything. I did some troubleshooting and it didn't come back with something. Help?

  Discover difficulty a slow, slow PC to get some tips.  The slowness is usually because that substantive updates are always busy, and you can resolve it by leaving all night at the end of all these substantive things.

  PS. don't forget, you open the Store app and get the 8.1 update, it fixes hundreds of problems that will save you a lot of headaches later.

• After the computer has been infected with virus win32/cutwail.BA computer is very slow at startup

  My computer is infected with this wirus and my wirus program can not take it away from the computer, it make the computer very slow at the beginning, what should I do?

  Hi Andersjohansson,

  Method 1: To fix the performance issue, follow the steps mentioned in the link below

  Optimize the performance of Microsoft Windows Vista

  http://support.Microsoft.com/kb/959062

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Run Microsoft Security scanner (MSS) for any threat of remnant and try to correct

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Infected files can be deleted from your computer; There is a chance of data loss.

• Slow to recognize the key

  HP ENVY 15-3040nr Notebook PC. F.06 BIOS, SMBIOS 2.7 runs an Intel core [email protected]

  The keys "B" and "N" are VERY slow to recognize when I type, which makes me slow down my pressing one key at a time. The 'BACKSPACE' key is so slugish. I don't have to press harder, just pressed longer so he could be seen.

  Hello larryf54,

  I understand that some of your keys are slow to respond.

  Go to Device Manager and uninstall the keyboard.

  Restart the computer.

  This uninstall and reinstall the driver for the keyboard.

  Here is a link that will show you how to get to Device Manager.

  I would like to know how everything goes.

• Satellite C70-C-10 t - very slow, installation Win10 takes forever

  Hello

  I bought a new laptop from Toshiba today. And since puttng to use, it is very slow, I installed all the upgrades that did not help and I tried to install windows 10 but it worked for 2 hours now and it just went from 12% to 13%. Is this a known issue?

  Thanks in advance!

  When you buy a new notebook, the first thing we do is to make a backup of recovery. It is very important. You should have backup image recovery.
  If something goes wrong, you can use this media and reinstall the original recovery image.

  Each new laptop is slow at the beginning. What you need is the optimization of the OS. Remove all the unnecessary stuff from the system and check the windows startup.

  Many applications that you do not actually start with windows and start up takes a lot of time.

• Installation of printer on windows 7 64 bit very slow drivers

  Hello

  I tried to install printer drivers on all our systems to 64-bit windows 7 and it takes a lot of time for the drivers to install.  The time it takes to be installed varies from 5 minutes to several hours.  The latest downloaded drivers from the manufacture of the printer, but its seems to winodws 7 64-bit takes a long time to install the drivers.  Anyone have a similar question?  Any available explanation for these very slow install?  All responses will be appreciated.

  Thank you.

  Hi prowess.

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/7b6d5c8d-C73F-42BF-8744-cefacd7c45de

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Very slow speeds - Workstation 8.0.2 suspend

  I don't know if it something that I did, or the recent update of the workstation, but it is now still holding to suspend my (fairly large) guests. A guest of Vista is by far the most powerful, although a small enough guest of Windows 8 is also very slow.

  All my guests are split into 2 GB sizes and all have recently been "shrunk"---(erreur?). All are run under a Windows 7 host.

  Does anyone have advice to try to improve performance short dating back to 7 Workstation?

  > All what you have tried so far work?
  Hi Dave
  I had the same problems with suspend time WS 8 and 9.
  The only thing that has really worked to change my habbit use suspend rather than turned off when done with a virtual machine.

  With 9 WS, I expected that suspend one of my typical virtual machines may mean that the host can (often) to do nothing other than just suspension than a VM for a time up to 30 minutes or even an hour complete (often enough to see!)
  I tried everything I could think off, but nothing is really - I have never used WS so rarely that this version 9.

  I run 10 now and downtime are close to what we were used with 6.5 or 7

  If these problems seem to be fixed in WS 10 - at least for me.
  But before you change - control because WS 10 different problems

• After that download Modzilla updates, all VERY slow computer, bad enter some applications

  I have a problem with my email and Facebook, I can't in the games that I played, computer is very very slow.

  Hi szagorski,

  Have you looked at the Knowledge Base article, the problems with some Facebook games, chat and more? There is much good in this troubleshooting information. Please don't forget to try all the suggested steps. Each one is precious and can be the answer to your question.

  Hope this helps!

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Why all this very slow loading on my computer lately?

  When I click on a program to open it, it is very slow to open an it.when I am online, sometimes it just freezes

  Hi dls4u2c,

  1. Did you the latest changes on the computer?
  2. You receive an error message on the computer?
  3. You have security software installed on the computer?
  4. When was the last time it was working fine?

  Method 1

  Check if the problem persists in the safe mode and after back with the results.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Very slow - Window 7, 266 mHz i7, Geforce 9800 GTx graphics card - computer was reformat hard drive, reloaded windows 7 and without other installed programs/games.

  My computer is running very slowly - i7 (quad) 266 Mhz and Geforce 9800 GTX graphics card.  I had this computer for about a year.  The problems seemed to start about 3 months when I started to play a game - Empire Total war with Steam.  The computer ran more slow and more slowly, gradually.  I tried all the clean disk, speed up programs, he worked once for a few days and then become very slow.  Finally, I backed up my files and reformat the hard drive and reloaded windows 7.  My computer has nothing loaded except windows 7 and is always very slow! Hardware issues? Help, please.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS features, energy saving
  Start by disabling: Intel EIST, Turbo Mode, Cool and pretty
  and fall at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  Prime95: Displays your actual speed of the processor when using CPU ID under a heavy load.
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  -----------------------------------------------------------------------

  Also: Try running Memtest86 +: it runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Computer is very slow with El Capitan

  After the recent upgrade to El captain, my Macbook pro (13-inch, mid 2012) became very slow.

  Starting, restarting, Safari, open programs... Wheel of Rainbow all the time.

  If someone could help, I would be very much appreciated!

  Thank you!

  My Etrecheck results:

  EtreCheck version: 3.0.3 (307)

  Report generated 2016-09-20 19:59:32

  Download EtreCheck from https://etrecheck.com

  Time 04:09

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.9 GHz Intel Core i7 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 667

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  TOSHIBA MK7559GSXF disk0: (750,16 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 749,30 (Go 140.30 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/hosts - Count: 17

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / Library/Application Support/PeerGuardian

  xxx.qnation.PeerGuardian [no charge] (1.1.13 - SDK 10.8 - 2015-10-28) [Support]

  / System/Library/Extensions

  com.Wacom.kext.wacomtablet [no charge] (6.3.8 Wacom tablet - 2 - SDK 10.9-2016-09-20) [Support]

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 168 jobs

  tasks of Apple 64 [performance]

  Launch system demons: ⓘ

  [no charge] 48 Apple jobs

  [loading] Apple 165 jobs

  [running] Apple 77 jobs

  Launch officers: ⓘ

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2016-09-16) [Support]

  [loading] com.adobe.CS5ServiceManager.plist (2013-01-11) [Support]

  [cannot] com.extensis.FMCore.plist (2016-09-06) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2014-08-13) [Support]

  com.Wacom.wacomtablet.plist [running] (2014-03-31) [Support]

  Launch demons: ⓘ

  [loaded] com.adobe.SwitchBoard.plist (2016-09-16) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loading] com.disc - soft.DAEMONTools.PrivilegedHelper.plist (08 / 08/2013) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-09-16) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2015-12-28) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2014-08-13) [Support]

  [loading] com.rogueamoeba.instanton - agent.plist (2014-03-25) [Support]

  [loading] xxx.qnation.PeerGuardian.locum.plist (2015-10-28) [Support]

  User launch officers: ⓘ

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-09-20)

  [loading] com.spotify.webhelper.plist (2015-06-08) [Support]

  Items in user login: ⓘ

  Application of hidden caffeine (/ Applications/Caffeine.app)

  Suitcase Fusion 6 hidden Application (/ Applications/Suitcase Fusion 6.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-28) [Support]

  Default browser: 601 - SDK 10.11 (2016-09-17)

  Flip4Mac WMV Plugin: 3.2.0.16 - SDK 10.8 (2013-06-07) [Support]

  WacomTabletPlugin: WacomTabletPlugin 2.1.0.6 - SDK 10.9 (2014-03-31) [Support]

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-09-16) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-20) [Support]

  Silverlight: 5.1.20513.0 - SDK 10.6 (2016-09-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-17)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-20) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

  AdobePDFViewer: 10.1.1 (2016-09-16) [Support]

  JavaAppletPlugin: Java 8 updated 66 17 (2016-09-16) check the version of build

  3rd party preference panes: ⓘ

  Flash Player (2016-08-30) [Support]

  Flip4Mac WMV (2013-03-29) [Support]

  Growl (2016-09-16) [Support]

  Java (2016-09-16) [Support]

  WacomTablet (2016-09-16) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  kernel_task 2%

  0% aslmanager

  0% fontd

  0% AddressBookSourceSync

  Top of page process of memory: ⓘ

  573 MB kernel_task

  Com.apple.WebKit.WebContent (9) 369 MB

  66 MB WindowServer

  Safari of 57 MB

  49MO softwareupdated

  Virtual memory information: ⓘ

  5.37 GB of free RAM

  used 2.63 GB RAM (2.02 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  Sep 20, 2016, 19:52:05 Self test - passed

  Sep 20, 2016, /Library/Logs/DiagnosticReports/FMCore_2016-09-20-183021_[redacted].crash 18:30:21

  / Applications/Suitcase Fusion 6.app/Contents/Resources/FMCore

  Sep 20, 2016, 06:24:44 PM/Library/Logs/DiagnosticReports/WacomTabletDriver_2016-09-20-182444_ [redacted]. Crash

  com.wacom.WacomTabletDriver - Library/Application Support/Tablet/WacomTabletDriver.app/Contents/MacOS/WacomTabletDriver

  Sep 20, 2016, /Library/Logs/DiagnosticReports/FMCore_2016-09-20-181728_[redacted].crash 18:17:28

  First uninstall CleanMyMac3. It is not necessary and can ask questions.