Very slow speeds - Workstation 8.0.2 suspend

Similar Questions

• Satellite Pro A100 carpet * dvd uj - 841 s write at very slow speed

  Hello.

  The carpet * a dvd multi drive uj - 841 s that came with my satellite pro a100 written on very slow DVD. Firmware 1.50
  I use good philips and kodak media (both rated 16 X).

  now, I know that the drive is only rated at 8 X max. But I can't even reach 6 X.

  A firmware update would solve this?

  Thank you very much.

  Hello

  To my knowledge, some burning applications control the burning speed to obtain the best possible results from burning
  As you probably n t know the speed of combustion higher risk of burn errors
  I burn my DVD only using a single 1 x speed.

  Then I can be sure that all DVD players would be able to play the burned DVD.

  Greetings

• Front side bus and processor very slow speed on the Satellite 2800

  I acquired a 2800-200, and it was running very slowly.
  Sandra 2002 shows the speed of processor as well as 199 Mhz FSB as 26 Mhz. A CPU speed test confirms it. How do I (I can) fix this?

  Everything else seems normal.

  Wow, this must be a very old unit it s not I known but thank you google I ve found some details ;)

  It seems that the unit has been delivered with a processor Pentium III 700 MhZ and 100 Mhz FSB.

  I m not 100% sure about this laptop, but the new units are delivered with the TPS (Toshiba Power Saver) that controls the speed of the CPU. If the temperature rises and the cooling modules are not longer able to cool the system the CPU speed CPU should be cut to reduce the temperature.

  I think you should check these settings on your laptop and also check the cooling fans because sometimes the dust and debris to prevent the circulation of air.

• Windows XP starts with a very slow speed

  I have a dell latitude d610 laptop with intel centrino 1.89 Ghz and 2 GB of ram with C: drive of 50 GB capacity
  every thing is good runnig but since few windows days starting the process takes a long time (about 2 minutes)

  I tried

  1. system restore

  2 mcafee stinger
  3. an analysis deep essential microsoft

  but nothing works
  Some applications such as internet explore and Windows media player also take a lot of load
  In addition, the CPU usage is normal
  all other applications and my machine function are normal
  Help, please
  Thank you

  You have a number of files mutifragmented and your system would benefit from a few selected system restore points. cCleaner is the best tool for this.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before the error occurred initially do not use this option.

  If more than one person uses the computer and they have their own user log you need to run Disk Cleanup in each user profile that you want to delete all the unwanted files.

  A better program of disk cleanup is cCleaner. Delete System Restore points may be important if you have little free disk space. The ability to delete them is one of the tools options. You can selectively remove those created in less important moments.

  cCleaner comes with a registry tool. Do not use this tool as any registry cleaner could lead to the creation of very difficult to resolve system errors.
  http://www.CCleaner.com/download

  You must ensure that you are defragmenting regularly. Defraggler is a freeware tool that is better than the now outdated Defragmenter supplied by Microsoft with Windows XP.
  http://www.Piriform.com/Defraggler

  Download cCleaner and Piriform Defraggler, rather than the alternative. Instead, do not replace the use just of Microsoft Defragmenter Defraggler. The Microsoft Defragmenter is also a useful supplier of reports. Can you provide a supplemental report when you run cCleaner and Defraggler.

  Your figure of validation of the 1037342 fees is relatively high for XP but wll below the RAM installed. McAfee can cause problems of performance on a Windows XP computer. I suggest that set you up an alternative freeware like Microsoft Security Essentials or AVG free 2012.

  http://Windows.Microsoft.com/en-GB/Windows/products/security-essentials

  http://free.Avg.com/GB-en/download-free-antivirus

  Download AVG rather than Cnet.

• RV180 WAN/Internet very slow speed via WAP4410n (Port RV180 speed problem)?

  Hello

  I have a base set up on the RV180, no etc. VPN running 1.0.5.4 Firmware (latest) and use a browser of WAP WAP4410n plugged into a LAN of the RV180 port. I have a SG100D Gigabit Switch also connected to a port RV180. My WiMax ISP provides 12 MB.

  When I leave speed Port on the RV180 & WAP4410n on Auto neg. They hook at 1 GB and I have ONLY 2 MB Internet speed on wireless clients with no reported ignored packets on each device, when I change the port to 100 MB on the WAP4410n Rx. speed speed is normal at 12 MB!  The RV180 also indicates the speed of the LAN port for 1 GB... it is obviously wrong!  Obviously, forced to run the LAN of WAP port to 100 MB so I can get the ISP... normal speeds is limitation all my wireless to wired LAN traffic (and vice versa).

  I tried several configs RV180 ie. Simplified of bare bones, exchanged cat 5th etc. etc. WITHOUT change.  With another router, there is no problem with the port of WAP4410N at 1 GB and ISP speeds are normal. ISP speeds are also normal via the Gigabit switch to other boxes, BUT if I plug the WAP4410N in switch WAN speed is 2 MB if the WAP4410N is set to 1 GB port speed!

  With the RV180 unable to define a manual port 100 MB speed (see 1.0.5.4 Firmware release notes), that strongly leads me to believe that it is a problem of data Port RV180 specific WAP WAP4410N somehow.

  Their are many positions reports slow Internet with the RV180, but none of them have a solution.  Ideas, any help would be greatly appreciated that Ive lost too much time already trying to solve this router ÷ # $$ / / / &. As this is my first post I hope I posted in the appropriate forum.

  Thank you... Rob.

  Thank you for the update.

• Lightroom very slow speed

  If my catalog has lots of photos in there - and LR is running slowly - I should start a new catalog to help my editing speed. Everything has slowed down considerably!

  Hello

  Yes you're right. Please try to uncheck the option "use graphics processor.

  Normally, Lightroom automatically checks if there is a new version available. To force the audit you can go to the Help menu and then click on "Updates" (I don't know exactly how this point is named in the English version, I work with a German version).

  Axel

• New meeting place 8 Pro 3000 (2014) - WiFi VERY slow speed

  Hello, I hope that someone here had the same problem and it fixed or at least knows the answer.

  First of all, the new V8P3K can only connect on the 2.4 Ghz band?  There 5 GHz radio?

  Second, I noticed that any device on the 5 GHz band is close to 100 MB speed, that I pay.  What that this either on the tape of the 2.4 GHz (this tablet) struggles to reach speeds of 3-4 MB down and 6 MB speed (band of 2.4 Ghz tested on other devices with the same results).

  Then...  Should I get an evil router?  Tests are carried out within 20 feet of the router, direct line of sight.  I live in a Condo, so I wonder if I just have too much interference.  Is there a recommended channel?  or should I buy a new AC routers?

  Should how fast I expect on this Tablet?

  Thanks for any idea that you can provide.

  Answered my question about the best speed of my router.

  The usual advice is that channels 1, 6 or 11 are the most effective channels on routers with a 2.4 Ghz channel. It is absolutely not in a busy housing building.  Too much overlap I think.

  Channels 4,5,7 and 8 were all get Mb speed 30 +, I was expecting.

  I guess we don't have a radio to 5 GHz on this tablet...

• My internet speed is good, but the download of firefox is very slow. Why?

  I have a WiFi internet connection shared with 54.0 Mbps speed. Internet high speed is good, but the installer of Firefox download Firefox at very slow speed. It takes about 10 to 15 minutes in the Firefox download. Please correct the problem if it occurs through your side, else do tell me what can I do to feel better. Thank you.

  Full Setup (for Windows) can be found at mozilla.org -> systems & languages under the Green download button link.

• Satellite U920T/01Y - very slow internet

  I just bought a U920T Satellite. It runs at very slow speeds of the internet. Speedtest shows generally between 1 and 2 Mbps I have tried other than laptops sitting next to him, I can get a speed of 18-20mbps.

  Y at - it a driver update will fix this or is it a hardware failure it will take to repair?

  Hardware failure?
  I doubt

  First of all, it would be interesting to know what link are you using? LAN or WLan?

  Second: the laptop was connected to the power adapter or its operation with battery?

  Third: internet speed depends on connection internet, server, and all the devices that share the same line so if several laptops and other devices are connected to the same router, the data rate could be lower

• SAMSUNG SSD very slow external T1 to El captain

  Since then, I've updated my iMac k 5-El Captain my external Samsung Q1 SSD starts very slowly and access is also very slow. This also reduced the mail sending speed with attachment of this SSD at very slow speed.

  Before the high-speed T1.

  If you have installed their so-called "activation software", which is probably the culprit

  the origin of the problems.  The best thing to do, is to move all your data on this disk

  Besides, the software 'activation' and use OS X disk utility

  to repartition and reformat the drive correctly for use on Mac.

• Very slow network with 10 Workstation and Windows 8 / 8.1 Windows

  Hello

  I come to you because I have a problem with the network with 10 Workstation and Windows 8 / 8.1

  In fact, if I copy files from or to a virtual machine with my host of Windows 8 by sharing Windows (SMB / CIFS), it is very very slow and unusable.

  Example: My host is a Windows 8 x 64 and Windows 8 x 64 host: transfer speed is about 100 or 200 KB/s and often 0 KB/s (transfer seems to be paused).

  With a guest Windows 8.1, same problem.

  After many tests, I also tried with Windows PE 5 (same kernel as Windows 8.1): same problem, unusable.

  But, miracle, if I use "Utility MSI - X OFF" Intel, I reboot and the problem disappears.

  There:https://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng & DwnldID = 18946

  Someone in this community, said that it have the same problem and a workaround solution was not to use Intel e1000e but e1000 then: I must admit, it works.

  With e1000, speed is around 30 to 60 MB/s and stable.

  But, by default, 10 Workstation e1000e value when I create a new VM Windows 8.1, so it's a problem... Do not manually change for each new virtual machine and explain this to my students.

  Please, you can reproduce this bug and fix it?

  Thank you very much.

  New workstation 10.0.2 fixed this bug. Perfect.

• Very slow download speeds

  I just bought a macbook 12 "that I love. The only problem is I noticed very slow download speeds when downloading apps. I have also a 13 "macbook pro that I use on the same internet connection and downloads very quickly.  I have not tried to download any music or video yet, so I don't know if it's just a problem with applications, but it is ridiculously slow. It's a trait of these macbooks little, or something may be wrong?

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

  If you bought the product in the United States directly from Apple (not a retailer), you have 14 days from the date of delivery where to Exchange or return it for a refund. In other countries, the return policy may be different. If you purchased from a reseller, its return policy applies.

• Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

  My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

  < object edited by host >

  We are users like you.  Search locally by using something like Yelp or similar

  http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

  or read a few links which may be relevant on this forum about the slow mac mini

  http://BFY.tw/5C63

• Satellite L505-144 - flash memory transfer speed is very slow 1.45 Mbps

  Hello

  I have a Satellite L505-144 and installed the system Win 7 64-bit *.
  The problem is when I move or copy DATA using Flash memory, transfer speed is very slow 1.45 MB/second and I try the same memory Flash on another PC its work too quickly it move 22 MB per second

  What is the problem?

  Hello

  What is the status of the SATA mode in the BIOS?
  It must be set to AHCI.
  If it s set to compatible, then the SATA benefits can not be used
  Check it!

• HP Z800: Very slow HP Z800 workstation

  I have the HP z800 with quadro 6000 workstation, 2 Xeon 2.96 GHz processor thread 24 12cores, 256 GB SSD starts the disk, disk storage 4 TB, Hynix 24GO ram of 2 GB in 12 locations, but the system is very very slow, to extend I can not read AVi 1080 p footage on first pro, after effect from Cs5 to 13.5 CC please help me.

  I did all the necessary Bios setup but still not impressed

  OK, then the file indeed need to fast to read in real time in Premiere Pro storage. (After that the effects cannot read anything in real-time unless you do a RAM Preview.)

  A rotating disc is simply not enough.