My CS6 Mastercollection Dvd no longer works

Similar Questions

• I bought adobe CS 3 in 2008... I downloaded the software, as the DVD no longer works and all I get are pdf files and not the software itself... ive download 3 times reused up to 3 gigs on my mifi and im in box departure

  me twenty times... Bleep I downloaded the CS3 and im unable to open the software... I have the serial number... What is the license number, I have no idea... adobe does not recognize me because I bought it in 2008. representatives from Adobe can help me because they work with the most recent and im always in the dark ages... How can I reinstall the CD3 dvd no longer works

  Usually with the downloads you get a compressed executable file.  Just keep them all together and run the executable.  IT will extract and install the zipped file.

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• CD and DVD no longer works, code 19

  CD players and DVD has stopped working. In Device Manager, I get the following: "can I cannot start this hardware device because its configuration (in the registry) is incomplete or damaged (code19).»

  According to the testing of operating system following the steps under "Windows 7 or Windows Vista" or "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• P2 HP: DVD no longer works, code 19

  Our DVD player shows no more in Explorer.  We have recently upgraded to 8.1 and it had worked after the upgrade for several weeks so far.  We use VLC to play the DVD and it does not recognize it either.

  Now in Device Manager when I right click on GH82N DVD - RAM, I get this message.  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Any ideas on what to do next?

  Hello

  Please, use the following methods to fix:

  http://support.Microsoft.com/kb/314060/en-us

  Kind regards.

• CD/DVD no longer works, was not detected in Device Manager.

  Original title: cd/dvd drive Inop

  I use Vista 32 bit operating system. Until a few weeks ago, my cd/dvd worked. He suddenly stopped and when I look in my computer, it does not yet show upward. I followed a few steps from triubleshooting and they always have not worked. It appears on the BIOS but not on Device Manager page. What can I do to make it work then?

  Hello

  1. What are the troubleshooting steps you have tried to solve the problem?

  2. What is the brand and model of the computer and the CD/DVD drive?

  3. have you done any software or hardware changes on your computer before this problem?

  Method 1:

  Reference:

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope the information is useful.

• All programs freeze and CD/DVD no longer works correctly again. Help!

  For about the last 6 months, my software has become more and more difficult to use: email freezes when opening one of any size; sites Web freeze only to switch from one to the other. If using the Task Manager, can stop the freezing of my word program. Lap top not two years. This isn't the time for me to buy another laptop!

  Please help.

  And, after taking about six months to find out how to fix my CD/DVD; It does not work well now. Just stopped working fine without any preamble.

  Yikes!

  TW.

  Hi Tikal troglodyte,

  Please try the suggestions listed in the previous post and let us know the result out of it.

  If you think the freezing problem is with Norton then I would suggest you temporary disable and check if the freeze occurs, if you there is no point of freezing then I would suggest you to check with Norton supports for available updates.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/DVD no longer works after update BIOS of yesterday

  HP Pavilion dv7-6b55dx

  Win 7 64 bit

  I solved the problem with the audio that created the update, but now to discover that my DVD/CD is unusable.  I don't see the driver available to replace it.  Tried to reinstall the driver I have on my PC and got the error message

  Windows cannot start the hardware device because its configuration (in the registry) information are incomplete damaged (code 19)

  Help, anyone?

  Endy9 wrote:

  I tried a DVD player USB which also cannot use the info registry now damaged on the DVD drive external.  Do you really want everyone (I've seen dozens of messages on bulletin boards, and it's just what I've seen) to believe that it is a coincidence that immediately after installing this BIOS update hardware failed and corrupt just pilots themselves.  Please, I beg you.  We have an adult discussion about this.  The process of updating these registry settings can be affected if the real drivers belong to HP or not.

  If you notify me that I reinstall the BIOS (guess I can do no harm, since I already have downloaded audio drivers to reinstall) the registry information for my DVD will be fixed?

  BIOS do not affect or touch the registry somehow and there is no need to relocate the BIOS but you can reset the default BIOS. You could link me to these forums you're talking and if not. cases are of a scale that is having the same problem, the update of the BIOS can be studied.

  Since you said that even an external DVD drive is also not recognized its certainly a matter of s/w.  Could try to use a restore point was working on your dvd player? I know that you did a restore to a date before you installed the update to the BIOS, but you can try a diff. one?

  In addition, you can restore your BIOS downgrade (F2-System Diagnostics) If you feel/think the BIOS update is a cause of the problem.

• Satellite Pro A - DVD no longer work after about 10 min of use

  No matter what program I run a DVD with (VLC, Windows Media Center) it freezes after a maximum of 10 minutes, this program becomes inadmissible.

  (Windows 7)

  Hello

  I put also t know why this happens, but it would be interesting to know if you could some practical information about your model of laptop.

  You have installed all the drivers for your laptop?
  You have to clean the DVD player using a microfibre cloth?
  Have you updated the BIOS?

• Envy 27-k: external DVD no longer works with Windows 10 update

  I get the message windows cannot verify the digital signature for the drivers required for this device. Up to present Microsoft and DVD manufacturer threw their hands.  Need help because I use this device on a regualr basis.

  Hello:

  See if do one of the troubleshooting steps from the link below solves the problem.

  https://support.Microsoft.com/en-us/KB/314060

• Satellite Pro L300 Windows 7 Upgrade - DVD player no longer works

  Hello

  I upgraded my Satellite Pro L300 Windows Vista to Windows 7 a few months back, now, I noticed the Player DVD no longer works! All ok in Device Manager, but the habit of reading anything.

  I have use a Toshiba Windows 7 upgrade disk that could be my problem. I used the Windows 7 Upgrade Advisor and Windows 7 Ultimate disc.

  I tried to download and install the latest Windows 7 32 bit DVD Toshiba drivers but still no joy.

  Can someone advise procedure I should follow to correct, if I need to downgrade back to Vista, hope not!

  Thank you.

  Optical disc drive is properly listed in Windows Explorer?
  Do you have problems with some specific discs?
  Original music and film discs are readable?

  What player you use to watch movies?

• Sound and CD; DVD does not work.

  I did a windows so far and after that the sound and CD; DVD no longer works.

  I tried the attack on

  http://support.Microsoft.com/kb/948481

  But still does not.

  You can do so more easily by running the CDGone of Doug Knox fix. It does the same thing for you, automatically. If that doesn't work, then you can have some hardware issues.

  http://www.Aumha.org/regfiles.htm - for cdgone

  MS - MVP - Elephant Boy computers - don't panic!

• Drive DVD RW E no longer works.

  Drive DVD RW E no longer works.

  I'm running a gateway T-1412 with Windows Vista Home Premium Service Pack 2

  DVD RW drive used to work fine, but now when I put music or a DVD in drive E that nothing happens. When I click on my computer and click on the E drive, it opens and tells me to insert a disc that has already been inserted.

  I have tried everything I can think of who isn't much so help is greatly needed.

  Thanks, Dan

  Hello

  Check with Support technique Gateway, their documentation and online drivers.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  ---------------------------------------------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• CD-ROM/DVD-Rom no longer works

  CD-ROM/DVD-Rom no longer works, so I tried to update the driver manually, but he says "can not load material" I tried check the solution, it says "Windows cannot start this hardware device because its configuration (in the registry) is incomplete or damaged (Code 19).» How can I solve this problem. I'm not a person good tech

  Hello Vancouverhome,

  I suggest that you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  1. click on start this image and then click on all programs.

  2. click on accessories and then click Run.

  3 type regedit, and then click OK, if you are prompted for an administrator password or a confirmation, type the password or click on allow.

  In the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  4. in the right pane, click UpperFilters.

  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.

  5. on the Edit menu, click on delete.

  6. When you are prompted to confirm the deletion, click Yes.

  7. in the right pane, click LowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you. Go to the section "Next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

  8. in the Edit menu, click on delete.

  9. When you are prompted to confirm the deletion, click Yes.

  10. exit the registry editor.

  11. restart the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• My Photoshop CS6 keys no longer work

  Hello

  A few years ago, I bought a key for a University Photoshop CS6. I activate the key online and download Photoshop. End of everything, but now I realize that the key is not in 'My products' more. And the key no longer work, if I want to activate it. But I have the normal version of Photoshop 6 on my PC and can use it and can also access My Adobe in Firefox, if I click on help.

  It is an Extended CS6 version.

  I hope someone can help me.

  Thank you for clarifying that, please use the following link to download Adobe Photoshop CS6: applications download Adobe Creative Suite 6

  Click here for instructions on How to download, install and activate Adobe applications.

• Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hi titi % 20wright,.

  Please use the link below to Download Adobe Creative Suite 6 applications

  Since you get two activation with a license, once installed you must activate the product using the same serial number. See, https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Let us know if that helps.