My ESXi 4 demo environment is very slow

Similar Questions

• In ESXi 5 very slow network performance

  We have recently updated one of our servers to ESXi 4.1 to 5. It's a Dell PowerEdge T300 with 24 GB of RAM. It used to run very fast, but after the network upgrade is very slow. We have another server that is still running ESXi 4.1 which runs very fast.

  I noticed the slowness of the network in Windows 7 and Windows 2008 R2 systems. When I copy a file from the ESXi 5 hosted VM to a physical machine on our network, I get between 2 to 4 Mbps. When I copy the ESXi 4.1 hosted VMS on the same physical machine, I get 80Mbps.

  I tried to disable TCP unloading on the physical machine and virtual (and both) computers with no improvement.

  I also performed a capture of the WireShark packages on one of the virtual machines Win 7. I noticed one interesting thing is that there was a lot of duplicate ACK packets when you transfer a file on SMB. I didn't know where to go to from there.

  If anyone has any suggestions, I would appreciate it.

  Check the BIOS of the server ESXI 5 and see if this physical NETWORK card sharing resource IRQ with another device and change it if it is.

  -KjB

• ESXi Server very slow

  I am managing an ESXi v3.5 and it is slower than molasses!

  All VM is running very well, as there is no problem, but connection and try to manage the host ESXi expires more often it connects.  Under performance - & gt; system is an alert under "criticism for unspecified Int 1 - Bus say unrecoverable error."  And someone in front of me seems to have been managing this host with a Virtual Center Server and he thinks he always handled.

  So, a few questions:

  (1) what is the error system supposed to tell me?

  (2) a reboot will cut the ghost Virtual Center Server?

  (3) any ideas on slow?  A reboot that will correct perhaps?

  b

  Good to know. Look, this isn't official or anything, but I have seen sfcbd significantly reducing the performance of the E.C. on ESXi. You need to upgrade to the latest version of ESX (U4) so I think that you will get rid of this.

  Services can be kept low without problem. The only thing you lose is a kind of material maintenance for the 3rd party software.

  If you can, check this discussion as resolved so I can try to win a prettier icon

• HP Elitebook 8570p - Windows XP USB very slow and the transfer rate performance issues.

  Hello. I was wondering if anyone else knows some performance issues with the HP Elitebook 8570p and Windows XP Pro - SP3.

  I get a VERY slow start, general poor performance (waiting time when opening files and programs).

  I asked to burn in tests that show that everything is good.

  USB transfer rates are VERY slow (tried all ports of a Seagate FreeAgent USB drive, which works fine on other laptops etc.) for example a 30-minute transfer a 7gig single file of the USB HD on the desktop. Only 3 minutes to do the same on another laptop.

  I think there are problems with the drivers, like Windows 7 works very well and does boot from a bootable USB.

  USB transfer rate are also good when starting from a Windows boot environment.

  I installed HP SoftPaq Download Manager, and all the drivers are up to date.

  Hello:

  I think outside of the box here... Select the Intel (r) 7 Series Chipset Family SATA AHCI Controller instead.

  If it does not, I raise the white flag.

  Paul

• Very slow - Window 7, 266 mHz i7, Geforce 9800 GTx graphics card - computer was reformat hard drive, reloaded windows 7 and without other installed programs/games.

  My computer is running very slowly - i7 (quad) 266 Mhz and Geforce 9800 GTX graphics card.  I had this computer for about a year.  The problems seemed to start about 3 months when I started to play a game - Empire Total war with Steam.  The computer ran more slow and more slowly, gradually.  I tried all the clean disk, speed up programs, he worked once for a few days and then become very slow.  Finally, I backed up my files and reformat the hard drive and reloaded windows 7.  My computer has nothing loaded except windows 7 and is always very slow! Hardware issues? Help, please.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS features, energy saving
  Start by disabling: Intel EIST, Turbo Mode, Cool and pretty
  and fall at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  Prime95: Displays your actual speed of the processor when using CPU ID under a heavy load.
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  -----------------------------------------------------------------------

  Also: Try running Memtest86 +: it runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Very slow WebLogic administration console in a strange behavior

  Hi, I am facing a problem where the weblogic administration console becomes very slow, here is the scenario:

  * I have 3 servers managed in my environment, 1 server is a loadbalancer using servlet cluster weblogic, 2 other servers are in a cluster where

  1 server is in the same physical machine as the server administrator and the other on another Machine

  so now THAT if I stop the 2nd managed server is on another machine, the administration console becomes very slow, it takes like 30 seconds to load any section.

  I use the Weblogic Server 10.3.6 & ADF 11.1.2.4.0

  
  

  Help, please.

  Hello

  Administration console WebLogic Server 10.3.6 becomes slow when a managed server is disconnected from the network, because the ServerLifeCycleRuntime does not wait times.

  It is recorded in the published 14295772 vice - WEBLOGIC 10.3.6 SLOW CONSOLE - SERVERLIFECYCLERUNTIME no IS NOT TAKING THE WAIT times

  Please, ask for the patch number 14295772, so that the administration console does not slow down for answer in case one of the host machines is achieved.

  Then, you must set the following parameters:

  (1) in mydomain > Configuration > General > Advanced page

  Invocation seconds Timeout: 2

  (2) in the administration Console, on the preferences page > shared Preferences (Tab)

  Timeout operation management: 5

  Thank you

  Sharmela

• Very slow access to data on HP MIcroserver Gen8 warehouses. Can not change the system of booking resources with vSphere client.

  I did a clean install of ESXi 6 with HP supplied image (ESXi-6.0.0-2494585-HP-600.9.1.39-Mar2015).
  Access to and from the warehouses of data over network via vSphere Client (6.0.0 - 2502222) is very slow - ~ 10 Mbps (there are several hundred under ESXi 5.5)
  I suspect that ESXi 6 limited CPU resources used by the host to 230 MHz system.
  I can't change the settings 'System Resource Reservation"(unlike ESXi 5.5, where I can change and switch to Simple or advanced mode).

  Hey ArnisR,

  I finally found the problem. In the last 5.5 ESXi and version 6.0, they replaced the driver hpvsa (HP ISO vSphere!). With these drivers, I have known major problems with banks of data and, therefore, the controller B120i (RAID) of the Gen8 MicroServer HP.

  The problem is caused by the last (HP) ISO (from March);

  -Mar2015.iso 5.5.0 - Update2-2403361-HP - 550.9.2.27 VMware ESXi

  -Mar2015.iso 6.0.0 - 2494585-HP - 600.9.1.39 VMware ESXi

  I found out (because I had an older ISO), the ISO VMware ESXi 5.5.0-Update2-2068190-HP-5.77.3-Nov2014.iso works well! With this ISO standard, all performance issues disappeared.

  The difference between the ISO is as follows. The former ISO contains the driver of storage scsi-hpvsa 5.5.0 - 88OEM. ISO (s) of March come with new storage driver scsi-hpvsa 5.5.0 - 92OEM or scsi hpvsa - 5.5.0 - 90. These drivers are the cause of the problems in the controller of B120i!

  Installing ESXi 5.5 or 6 since last ISOs, you must manually install the old driver of storage (SCSI hpvsa - 5.5.0 - 88). I tested with the HPSA file scsi vib - 5.5.0 - 88OEM.550.0.0.1331820.x86_64.vib. Then I adjusted the ISO HP and equipped with the old driver. Now I can install ESXi 5.5 or 6 ISO (custom) of HP, which includes the former driver.

  I hope this helps!

• vSphere Home Lab: very slow network speed, I'm desperate

  Hello

  After many trials that I have finally found the right hardware build my vsphere home laboratory.

  This is my setup:

  ESXi1

  ASUS P6T Deluxe V2

  I7 920

  24 GB OF DDR3 MEMORY

  2 x Intel Pro 1000 GT Desktop Ethernet adapter

  2 ESXi

  i5-2500

  16 GB OF DDR3 MEMORY

  1 x Intel Pro 1000 GT EthernetDesktop adapter

  NAS

  ASUS P7H55-M

  Intel Core i3-540

  Windows Server 2008 R2 with Starwind iSCSI

  Realtek Gigabit Ethernet

  I have a Netgear GS108 where I plugged all the ethernet cables over my ADSL Modem, a Linksys WAG320N

  Everything is OK apart I have a speed very very slow in the network; for example ISO 2k8r2 server transfer I take 30 minutes

  After many trials, I decided to start from scratch, I just powered on my ESXi2 machine and reinstalled ESXi 4.1U1 from scratch and I installed the Client vSphere for my Client PC which have a Gigabit Ethernet card and is also attached to the switch Gigabit however, speed is still the same, 2/3 MB / s.

  The strange thing is that also the same speed very slow, I created a Server 2008 VM and installed iperf to landmark of network and I get about 600 / 700 Mbps, so I really don't know what I can do.

  I replaced the ethernet cables, also tried to connect the cables directly to the modem and also I tried with another switch, but the result is always the same.

  He is now a cable or switch problem because I tried to create an iSCSI drive and transferred a file of 10 GB of my Client PC to the iSCSI disk and I get about 120 MB/sec so is full Gigabit network speed.

  Also, I installed FileZilla FTP Server on the ISCSI server and tried to download and upload a file of 10 GB and the speed is never 115 / 120 MB/s.

  Really, I don't know what I do that, I'm really desperate.

  Thank you very much for your help.

  Routers are NOT created equal.  There is a business reason switches cost $10,000 - $20,0000 dollars.

  Netgear router / switch is just a very BASIC.  It's not classy company.  That's your problem.  Get a better switch that you don't need to spend $10,000 but probably a few hundred... a GOOD show for home switch...

• Very slow network performance

  I have a Dell T610 running ESXi 4 with a pair of built in maps network gigabit Broadcom BCM 5709, to which I've also added a gigabit dual port Intel 82576 NIC they are all plug a Cisco 3560 24 ports switch. There are a couple of virtual machines on this computer and there was near zero, a network, or activity of the CPU during the following tests as they were made during off-peak hours.

  I noticed a few updates takes a long time to download and, after completed and restarting the virtual machines, I decided to perform a speed test that indicates the very slow network performance. But the performance is slower on one NETWORK card to another. Reduce the ports available to virtual machines on a single NETWORK card, that's what I got.

  Using Speedtest.net as a gauge running on a dedicated XP Guest:

  The Broadcom and Intel befriended 5Mbps showed and sometimes 10 Mbps.

  Only Broadcom showed between 13-18Mbps from one trial to another.

  Intel showed only 4-5 Mbps. never more than 5 Mbps!

  Physical work stations connected to the same switch showed 45Mbps repeatedly!

  All ports were originally configured as auto negotiate. I tried locking time ESXi and the Cisco switch to 1 GB Full duplex with no significant difference in the overall performance.

  Has anyone seen this? Have you found a solution?

  I got a similar promblem - found that the VM - NIC has been set at the 'flexible' type and VM-Ware tools were not properly installed.

  As I was not able to install (linux, no gcc), I've removed the NETWORK card and put in again as an adapter 'e1000 '. From here, I had transferrates as expected ;-)

  I hope this helps...

• Server vertual very slow vs 2005

  I use a vista and you use VM via MS vertual 2005 server, four VM can run without problem (sometimes slow and some very slow time).

  Then I have a clean install of esxi on my machine and runing my vista (p v) through VM, server2003 plus two are running.

  However, they are slow increditable. Need more than 3 minutes at the start of vista.

  I don't see no adnormal through the performance table in esxi and VM

  ESXi is not suitable for a client computer, or it is need a machine of class server (HP dx7400, E8300, 4 G of Ram, SATA 7200 K 460 G)

  Thank you very much

  To confirm that you are running:

  • 2 vCPU, 1 GB of RAM, Vista

  • 2 x Win2k3, 2 vCPU, 512 MB of RAM?

  I would like to ask if these VMs really need 2 vCPU each? The usual recommendation is to assign only 1 vCPU unless they really need more.

  ESXi must plan 2 physical processors to begin to provide time CPU for each of your guests. but given that your processor has two physical processor cores means that there is actually no competition at all. I could change all the VMS to 1 vCPU and see how it works.

• VMWare ESXi 3.5 u4 suffering from slow performance in iSCSI RAID-5 of 15 k RPM SAS SAN

  Hi all

  I suffer from very slow performance using my deployed virtual computer on the

  iSCSI SAN-VMFS datastore, the attachment following shows the deployment

  scheme which I believe already according to best practices around of

  the net separating the SAN network in the server.

  According to: http://virtualgeek.typepad.com/virtual_geek/2009/01/a-multivendor-post-to-help-our-mutual-iSCSI-customers-using-VMware.html

  It seems that no matter how fast the disk is, using SAN

  in a VMWare environment, it will be always slow around 160 MB/s CMIIW

  Usually, this means that customers are

  which for a single iSCSI target (and however multiple LUNS that may be)

  behind this objective 1 or more), they cannot travel more than 120-160MBps.

  I do to boost performance?

  Thank you

  Kind regards

  AWT

  > I'll that connect to my network of Production, as well as on vSwitch0?

  Yes, just leave the default options team and it works perfectly.

  > I also tried to add two network cards more

  Do not group of NETWORK cards next to the virtual machine, is not useful. Do it right next to vSwitch.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• My macbook air 13 "(2015) is very slow, even after a clean install"

  Hello

  I have a macbook air 13 "from 2015 and it is VERY slow. I did a clean install from scratch of El Capitan (10.11.06) and always very slow.

  Etrecheck give ' "Performance: poor"»

  Is there a hardware problem? or what to do?

  Thank you

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-05 10:18:11

  Download EtreCheck from https://etrecheck.com

  Duration 17:11

  Performance: poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  too slow

  Hardware Information: ⓘ

  MacBook Air (13 inch, early 2015)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Air - model: MacBookAir7, 2

  1 1.6 GHz Intel Core i5 CPU: 2 strands

  8 GB RAM not extensible

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 40

  Video information: ⓘ

  Intel HD 6000 graphics card

  Color LCD 1440 x 900

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  SM0128G SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) / [Startup]: 120,10 (Go 104.05 free)

  Storage of carrots: disk0s2 120.47 GB Online

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [no charge] 6 tasks Apple

  tasks of Apple 166 [loading]

  [running] Apple 58 jobs

  [killed] 9 tasks of Apple

  9 killed process lack of RAM

  Launch system demons: ⓘ

  [no charge] 47 Apple jobs

  [loading] 158 jobs Apple

  [running] Apple 77 jobs

  [killed] 8 tasks of Apple

  8 killed process lack of RAM

  Launch demons: ⓘ

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-10-04) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.uTorrent.plist (2016-10-04)

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-10-05)

  Items in user login: ⓘ

  iTunesHelper program (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  uTorrent program (/ Applications/uTorrent.app)

  CleanMyMac 3 Menu program (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Plug-ins Internet: ⓘ

  Default browser: 601 - SDK 10.11 (2016-09-03)

  QuickTime Plugin: 7.7.3 (2016-07-09)

  3rd party preference panes: ⓘ

  None

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  14% WindowServer

  4% kernel_task

  0% SystemUIServer

  0% cloudpaird

  Top of page process of memory: ⓘ

  670 MB kernel_task

  Mdworker (11) 188 MB

  Com.apple.CommerceKit.TransactionService (2) 41 MB

  Finder 41 MB

  Mds_stores 33 MB

  Virtual memory information: ⓘ

  5.02 GB of free RAM

  2.98 used GB RAM (1.82 GB being cached)

  40 MB used Swap

  Diagnostic information: ⓘ

  5 October 2016, 09:38:39 test - passed

  Hello, have you tried to reset the management system (SCM) controller on your Mac - Apple Support?

• very slow Powerbook fine, iMacs

  My family uses 2 iMacs (1 2013, 1 earlier) and an Apple Powerbook at home. 2 iMac is incredibly slow, but the speed of the Powerbook is fine. IMacs both have a lot of unused storage and memory and I completely restored two iMacs and deleted unnecessary files, but they are very slow. I have everything back up on Dropbox and wonder now if the slowness is something to do with the combination of the signal at high speed and by using several connections of Dropbox in the House.  We have a Virgin Media Hub Super 2ac with advertised broadband router of up to 150 Mbps. I made a speed control using www.speedtest.com and the download speed is 105.81 Mbps and download speed is 9.70 Mbps. Any ideas anyone?

  You can view a report of etrecheck for later analysis

  www.etrecheck.com

  but I would like to disable and remove dropbox to test the system and if they improve the problem there.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• Very slow ARD mouse movements

  When checking my jobs local (same LAN) in ARD in macOS Sierra the mouse movement is very slow, are not smooth at all and the STI jumping cursor.

  This was never the case with ARD in the previous versions of OS X as El Capitan. I use the exact same settings and configuration. Control ARD clients so got very boring now under Sierra.

  Any ideas or others facing the same behavior?

  Thanks for your comments.

  I'm really the only one having trouble with the mouse under ARD here?

  I have a LAN local 1GbE very significant without bottleneck and change the color in ARD in black and white Mode has no influence at all for the risk mouse movement.