my external optical drive from shintaro has stopped working

Similar Questions

• Can I restore my laptop hard drive files that have been moved to my external hard drive (who subsequentally has stopped working)?

  I cut and pasted and then a few important files from my laptop on an external hard drive. Since the external hard drive stopped working. Is it possible to find the files that have been moved?

  Thank you!

  (More info: I tried to recover the files from external hard disk but it requires a physical recovery and would cost over $ 1000, which I did not; also unfortunately I don't think I created backup via the "backup and Restore Center" files in the control panel).

  It depends on how long you have moved the files, and how the computer has been used since.

  If you have Vista Business, Ultimate or enterprise, you can use the previous versions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/previous-versions-of-files-frequently-asked-questions

  Try these programs:

  • Free: http://www.filehippo.com/download_recuva/
  • $99, but the free trial version to see if it works before paying: http://services.seagate.com/eStore/Seagate-File-Recovery-for-Windows-P32C1.aspx

• WD external drive - "internet explore has stopped working".

  Hello

  I have a WD external drive.  I bought it 2-3 years ago and it works perfectly until a few months ago.  My computer is using Windows Vista.  The problem is that, although the external drive is detected when I open a pop up window appears indicating that Windows Explorer has stopped working. Then the window closes. I tried to update the software, I have uninstalled and installed back but the same problem still exists.
  Anyone know what I can do?
  Thanks in advance

  Check the drive on another computer, if the problem is the same, try using another cable or hard drive case. If this is not the case, see the link below, if it helps:

  The Explorer has stopped working Vista error
  http://www.streetmusician.co.UK/explorerstoppedworking/

• Driver Realtek audio has stopped working on my Satellite A100

  The Realtek audio driver I downloaded from this site for WinXp (V R 1.54) stopped working after an intervention apparently of another driver. The failure of any attempt to uninstall. This is a very stubborn driver and can t be eliminated completely from the computer. WinXp pro doesn't have a sound for this computer (Sat 100-787) driver and I can't reinstall the same driver. Yellow (i) continues to show in the Device Manager.

  What can we do about this and is there a better driver for my computer?

  As already mentioned in your thread at the beginning, you need to install the Microsoft service pack 2!
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=102308#102308

  After installing SP2, you must upgrade the XP to the last State! Use the MS Update site! Very important are the fixes KB888111 and KB835221!

  After the updated operating system you must install the latest audio driver from the Web to Realtek site, or from the Toshiba site!
  Please note that you must also update the BIOS to the XP version if you use XP on this laptop Vista.

  A note: the A100-787 belongs to the series PSAANE; Choose the right drivers!

• IDT Audio from PC has stopped working

  The following problem keeps occurring.  I am running Vista Home Premium x 64 SP1 on my Dell Inspiron.  Windows checks each time, but never returns from solutions.  Please provide a fix.

  Product

  IDT Audio of PC

  Problem

  Stopped working

  Date

  28/08/2009 22:01

  Status

  Report sent

  Signature of the problem

  Additional information about the problem

  Bucket ID: 3160184

  Problem event name: APPCRASH

  Application name: STacSV64.exe

  Application version: 1.0.6124.0

  Application timestamp: 49237c 70

  Fault Module name: msvcrt.dll

  Fault Module Version: 7.0.6001.18000

  Timestamp of Module error: 4791ad6b

  Exception code: c0000005

  Exception offset: 0000000000003237

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Information additional 1:39 b 1

  More information 2: cd356529eaae0727bbb34e304627cf80

  Additional information 3: 043d

  Additional information 4: e66029c1bf836183ece58c8fba2ccfda

  Hello

  Control Panel - Device Manager - Sound - double click click - driver - drivers Updates tab (this cannot
  anything like MS is far behind the certification of drivers) - then do a right click - UNINSTALL - REBOOT it will refresh the
  driver stack.

  Then go to the system manufacturer's website and download the latest driver Audio/high fidelity for your Vista 64 bit system.
  (Note the version)

  Download - SAVE - go to where you put it - right click – RUN AS ADMIN - REBOOT

  Check in the Device Manager - Sound - double-click on the driver tab - to be sure of the version that you have performed is installed
  too often, these will be rollback until this finally installed the current - then check if it is the right one and then run driver
  -reboot - check - repeat as needed.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Customization of the comments for the virtual machines deployed from model has stopped working

  Hi all

  (Environment: vCenter and ESXi 10 5.1 hosts running Build #3070626)

  We have a model 2012R2 and a file specification of customization that allows us to deploy the VMs 2012R2 server. It worked well for a while. After the Christmas break, it seems more work correctly and we havn't knowingly changed anything to cause this. We have fixed our ESXi hosts Build #3070626 October 6, but have deployed VMs of model since, without problem.

  We have all staged for the VM in advance (IE AD entry of objects and DNS). And then powered the deployed virtual computer, sysprep runs, but does not seem to apply settings in the customization file (IE rename the virtual computer, set the Admin password, join the domain etc.). If feed us the cycle of the VM, sysprep is running again, but even once, does nothing.

  I have attached the contents of my file guestcust.log of a computer deployed virtual (see below), but I do not see the clues about the problem. I thought initially the error on the first line was important, until I've found it is also present on the virtual machines that have been successfully deployed from this template in the past, so it's maybe a Kipper.

  Does anyone have advice for troubleshooting this?

  TIA

  Mark

  ==========

  guestcust.log

  ==========

  Could not query value reported in the registry (the system cannot find the file specified.)

  Sysprep from Windows Respecialize operating detected.

  Copy the files from C:\Windows\TEMP\vmw7DEB.tmp to C:\Windows\TEMP\vmw8A3E.tmp.

  Rescheduling of customization of the guest operating system.

  "Executing command C:\Windows\system32\schtasks.exe / create /sc ONSTART $ more HIGH/np/z v1 /ru SYSTEM /tr" C:\Windows\TEMP\vmw8A3E.tmp\guestcustutil.exe customize - sealparam \"/quiet/generalize/oobe /reboot\ ' NIC - 4000 - schedulenativeunobfusc ' /tn"VMware Guest OS task of customization.

  At the request of guest OS customization task invoked.

  Remove scheduled task of customization of the guest operating system.

  Execution of command C:\Windows\system32\schtasks.exe, /f/delete /tn "VMware Guest OS task of customization"

  Personalization current 2016 to 1 - Feb - 11 18:32:42

  RPCI: Send request = 'deployPkg.update.state 4 C:\Windows\TEMP\vmware-imc\guestcust.log 0'

  RPCI: Envoy = 'deployPkg.update.state 4 C:\Windows\TEMP\vmware-imc\guestcust.log 0' request, response = ", len = 0, status = 1

  Key successfully open SYSTEM\CurrentControlSet\Control\Session Manager\

  Size of 27 reg_multi_sz.

  Read the multi_sz registry autocheck autochk/q/v value *, size 27.

  value chain of registry autocheck autochk/q/v *.

  1 items back

  Obtained the session mgr BootExecute.

  Native App sysprepDecrypter.exe, arguments "

  Copied file sysprepDecrypter.exe to C:\Windows\system32\sysprepDecrypter.exe

  Update boot run value.

  Created / opened key \Guest Customization\ SOFTWARE\VMware, Inc. successfully.

  New shoe, run:

  autocheck autochk/q/v *.

  sysprepDecrypter.exe

  System drive: C:

  Move the folder "sysprep" to "C:".

  Select * from win32_networkadapter where manufacturer! "Microsoft" and ServiceName =! = "VMnetAdapter" and the manufacturer is not null and MACAddress is not null

  1 objects found. Pointer f049a8. return code 0(0x0)

  "" "0 items found." " Pointer to 0. return code 1(0x1)

  00:50:56:B0:70:46 the value for the property return system

  Setting dhcp for nic # 0

  Return value \\VMT-W2K12R2\ROOT\CIMV2:Win32_NetworkAdapter.DeviceID="10' for the system property

  ASSOCIATORS OF {\\VMT-W2K12R2\ROOT\CIMV2:Win32_NetworkAdapter.DeviceID="10"} where ResultClass = Win32_NetworkAdapterConfiguration

  1 objects found. Pointer eee290. return code 0(0x0)

  "" "0 items found." " Pointer to 0. return code 1(0x1)

  Clear the gateway ip addresses.

  Enabling DHCP on the computer

  Returns the value for the system property \\VMT-W2K12R2\ROOT\CIMV2:Win32_NetworkAdapterConfiguration.Index=10

  DNS server IP configuration

  Execution of command C:\windows\system32\sysprep\sysprep.exe/quiet/generalize/oobe/reboot /unattend:C:\sysprep\sysprep.xml

  Successfully executed the command C:\windows\system32\sysprep\sysprep.exe/quiet/generalize/oobe/reboot /unattend:C:\sysprep\sysprep.xml

  Try to connect network interfaces, try 1

  RPCI: Send request = 'deployPkg.update.state 4 103 C:\Windows\TEMP\vmware-imc\guestcust.log@4000'

  RPCI: Envoy = 'deployPkg.update.state 4 103 C:\Windows\TEMP\vmware-imc\guestcust.log@4000' request, response is "queryNicsSupported", len = 18, State = 1

  Got answer VMX 'queryNicsSupported '.

  RPCI: Send request = 'deployPkg.update.state 4 104 C:\Windows\TEMP\vmware-imc\guestcust.log@4000'

  RPCI: Envoy = 'deployPkg.update.state 4 104 C:\Windows\TEMP\vmware-imc\guestcust.log@4000' request, response = 'connected', len = 9, State = 1

  Got VMX response "connected."

  Network interfaces are connected to 0 seconds

  =============================================

  OK, I myself fixed the end.

  I created a new customization file with exactly the same settings as the old file, and it worked. I can only assume that the old customization file has been altered somehow.

• my 11.4r402 of flash player from adobe has stopped working

  It indicates a problem caused blocking the program works correctly, so windows closed the program and will warn me if a solution is available.  He never has.  Also 8 updates will not update.  What should I do?

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  What are the error codes and how can I use them?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them

  Windows update General troubleshooting

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

• Email from Windows has stopped working error error number: 0x800CCC90

  Shortcuts Windows Mail shows the error message:

  Account: 'pop3.rtr.net', server: 'pop3.rtr.net', Protocol: POP3, server response: '-ERR cannot establish SSL with POP server 66.62.180.2:995, SSL_connect error 10054', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC90

  I don't have any idea what it means. I can go to my ISP site and read my mail. I want to download on my computer like it used to. I tried to establish the NEW email account, tried to establish... still nothing: Windows Live Mail, get the same error message as above. Desperately need help! Pulling my hair out. Laughing out loud

  64 Windows Vista premium operating system.

  Thank you for any help or advice. DIXI

  See www.oehelp.com/OETips.aspx#3 , you may need to disable email scanning in AVAST or uninstall it and then delete your email account, compact and repair the database of WinMail (see www.oehelp.com/WMUTil/) then add your return email account again.  WinMail has quite a few quirks and sometimes it appears one needs to remove the account to solve the problems.

  If you continue to use WLM, you can ask in the appropriate forum here for WLM: www.windowslivehelp.com

  Steve

• Bridge "get photos from camera" has stopped working and bridge no longer recognize my DNG files

  , I've got bridge set up to get the pics off mem.card whenever I have insert one in my laptop (win. 8.1). A week ago I installed PlayMemories from Sony. Without asking he hijacked the task of the bridge to get photos of my cards. What's worse, I tried to start the function "get photos from camera" manually from the deck. Bridge started working, but nothing happens. I uninstalled PlayMemories and reset the bridge, said to my laptop to run bridge as soon as I insert a card. Still nothing is happening and I still can't get the function "get photos" to run manually from the bridge. In any case, I can still rund the DNG Converter to get my photos, but today Bridge does not recognize my files DNG - a well brought yesterday. CS6 downloaded from this link https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and tried to run the Setup program, but it doesn't seem to do anything. Maybe I should do a full uninstall off CS6 for her to do something... ?  Anyway, if any of you guys could help me with my problems of bridge/CS6, I would be grateful.  I have 3 sets of photos together and a shoot of comp. of snowboarding I have to finish this week

  CS6 running windows 8.1

  Good point.

  Bridge was not integrated with CS6 to CC? I have a following if, uninstall/reinstall only for laughs.

• What is events from COM + has stopped working?

  How can I solve this problem?

  Hello

  Try the following steps:

  Step 1: Try to start the service event COM system + and check that its dependencies are running:

  a. Click Start, and then type services.msc in the box start the search. Click on enter.
  b. when the services window opens in the right pane, look for the COM event system +, look at the status and make sure that it is started and watch the Startup Type and make sure that
  It is automatic or manual.
  c. If all are not as indicated, do a right-click on the service and click Properties, on the general tab, click Start, and select automatic for startup type.
  d. click the Dependencies tab, the first box will be the other components of the system which this service depends on the list, not one of those listed, and then return the list of Services and
  take the same steps listed above to ensure that these services are started.
  e. click OK and close the Services.

  Step 2:
  a. Click Start and then right-click "computer".
  b. click 'manage '.
  c. under the section 'System tools', Double click "Local users and groups" then click on 'Groups' d. 'Administrators' right click and click 'add to group... ". »
  e. click 'Add', then click on "Advanced".
  f. now click "search now".
  g. Double click 'Local Service', then click 'Ok '.
  "NT Authority\Local Service" should appear in the list now
  h. click on 'Ok '.
  i. close computer management and restart the computer.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• External hard drive has stopped working.

  I have a 500 GB WD external hard drive book that has stop working. He is no more, but I know that it is always powered because I can see that the lights are still coming when I plug in the power cord inside. No one knows anyway I can get access to the drive so that I can get my data on the disk. It was about 80% full and I was trying to take data out of the car so that I could make cleaner. It was not terribly fragmented, but I need to take some of the data out of the car that's why I was burning there CD so that I could do when he leaves. Now I can't access the drive at all. Does anyone know of a way I can access the drive so I can get my data?

  The only thing I've heard to try and get a non-filature spinning disk long enough to get the data off the drive is to put the drive in the freezer, let cool completely, and then quickly remove it and try to make it work.  Sometimes this will release bearings long enough to allow him to run for a few minutes before it warms so that you can get the data.  No guarantees, of course.

  Good luck
  JW

• External mouse problems "shell common dll windows has stopped working".

  I can't use an external mouse. When I go into the properties of the mouse it freezes and I get the following error message:

  Properties of the mouse [trial version]
  The Windows Shell common DLL has stopped working
  
  
  I am using Windows 7 32 bit
  Any ideas on how to solve this problem.
  Thank you in advance.

  Resolve the problem by uninstalling intellipoint a synaptics driver software in Add Remove programs. There is an incompatibility between these two software.

  After you remove the software I installed the latest version of the Synaptics touchpad driver I installed direct driver update the Device Manager files extracted from Lenovo Touchpad Synaptics file 89te11ww\Synaptics\WinWDF\x64 and 64-bit Microsoft Intellipoint
  This completely solves the problem with the windows common dll shell has stopped working message.
  Try it.

• HP CSI Shell has stopped working - cannot install the printer driver

  I just bought a printer LaserJet MFP M127fw Pro, but the installation of the pilot program still crashes. I tried 3 different modes of driver installation: the installation CD install HP Smart (USB) and download online, but I keep getting the same error.
  
  10-15 seconds after I start the driver installation, a pop-up Windows appears, advising me that:
  "HP CSI Shell has stopped working".
  
  I called HP customer care and they post in the computer section of the Support Forums.
  
  Does anyone have a solution to this problem?
  
  I have a HP Media Center PC with Windows 7 64 bit.
  
  

  Update:
  
  I tried the feature "Add a printer" windows default in Control Panel, and my printer is finally functional - only when used wireless. However, if I connect the USB cable from my printer, it will be recognized as a different printer and always unsuccessfully installed the drivers for it.
  
  If it works wirelessly, it is good enough for me.

• Toshiba 320 GB external USB HDD has stopped working

  Hello

  Recently this evening my external hard drive has stopped working. I can start it and the blue light shows, but it seems that the arm of reading or the mechanical part is stuck or does not start. It has a very low and repetitive clicking noise.
  Before I used to get a strong enough * Click * when starting and now nothing. Nothing does load in windows either, and remains undetected.

  I thought that I could send to repair if it's arm which is broken or needs other than tighteneing as, it's a pretty desperate situation that recently, I cleaned my computer and used the external hard drive as back up, with all of my work for the last 8 years on this subject...

  And I can't afford a recovery of data of 300 books, either.

  null

  Possibly the HARD drive died completely. I mean it might be possible that a head crash could cause this problem.
  My HARD drive died in the past, it was a laptop internal, HDD, and before that the HARD drive is dead, I noticed a strange rattling noise.
  After a restart the laptop the drive HARD was not accessible
  Well, HARD disk crash is not an uncommon problem and it always happens
  So, in most cases, it s also should back up the data twice. That is to say: on DVD, CD, etc.

• Satellite M70-340: display driver has stopped working

  HI, I BOUGHT ALL NEW LAPTOP FROM DUBAI THE MONTH LAST. HIS GIVING DISPLAY PROBLEM BEGAN THE IALMRNT5 DISPLAY DRIVER HAS STOPPED WORKING NORMALLY. MUST RESTART TO COMPLETE SYSTEM RESTORE"

  I DID ALSO DRIVE FORMATTED, REINSTALLED PREDRIVERS. BUT IN VAIN.

  ADAPTER IS INTEL! ATI DOES NOT INSTALL!
  DON'T KNOW HOW TO TO THIS TOPIC AND NOW IT JUST BEDS ONLY BLUE POWER LIGHT AND CRASHES ON STARTUP WITH SCREEN WHITE!

  PLEASE SUGGEST...
  CONTACT on [email protected]

  Hello

  If the reinstallation of the system with the recovery CD does not help, then it is not a software problem.
  This means that some hardware component is defective.
  In this case, you need to take your laptop to the service.

  Good bye