External hard drive has stopped working.

Similar Questions

• Suspension of monitor and hard drive has stopped working

  I had to reinstall my copy of XP after that I accidentally deleted the Isass.exe file, and do so to found the scroll to be less than adequate and time allocation for the monitor and the hard disk to stand down has stopped working. I can't put the computer in standby mode. If I use the screen saver, it lights up at the set time, but when the time is reached in which the monitor is supposed to withdraw, the screensaver disappears and the full screen returns. After that, the screen saver is no longer turns on until it is reset. In addition, the condition "save under" on the power selector is not save configurations.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• It seems that since I installed norton security 360 v3 to my vista computer that my hard drive has stopped working error code 19 something to do with the registry

  Code 19

  Description:

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.

  Signature of the problem:

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: SCSI\CdRomHL-DT-STDVDRAM_GT20N___CP02

  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}

  The PnP problem code: 00000013

  Driver name: cdrom.sys

  Driver version: 6.0.6002.18005

  Driver date: 11/04/2009

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 3081

  Read our privacy statement:

   

  Hello again once again not good it is the message that I'm getting ideas?  Thank you, Rob

  Hello husa58,

  Equip your Vista OS dvd, see below:

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the command sfc/scannow. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Toshiba 320 GB external USB HDD has stopped working

  Hello

  Recently this evening my external hard drive has stopped working. I can start it and the blue light shows, but it seems that the arm of reading or the mechanical part is stuck or does not start. It has a very low and repetitive clicking noise.
  Before I used to get a strong enough * Click * when starting and now nothing. Nothing does load in windows either, and remains undetected.

  I thought that I could send to repair if it's arm which is broken or needs other than tighteneing as, it's a pretty desperate situation that recently, I cleaned my computer and used the external hard drive as back up, with all of my work for the last 8 years on this subject...

  And I can't afford a recovery of data of 300 books, either.

  null

  Possibly the HARD drive died completely. I mean it might be possible that a head crash could cause this problem.
  My HARD drive died in the past, it was a laptop internal, HDD, and before that the HARD drive is dead, I noticed a strange rattling noise.
  After a restart the laptop the drive HARD was not accessible
  Well, HARD disk crash is not an uncommon problem and it always happens
  So, in most cases, it s also should back up the data twice. That is to say: on DVD, CD, etc.

• WD external hard drive no longer works! Requires formatting?

  Help! my external hard drive has suddenly stopped working and windows requires that I have format it before so I can use it again. But the bad news is that I have a lot of important data that I just can't lose so I need to know if there is anyway, any program that can help me out stuff before formatting because I don't want to lose it!

  It's a WD Elements 1 TB, and it is only about 7 months since I bought it. I think maybe some virus or something that I don't know the damn because before it empty I did some updates to my laptop and used HD once then on the second plug it has failed?
  Any solution?
  Thank you very much

  See the patches on this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/you-need-to-format-the-disk-in-drive-j-before-you/4e153784-3217-4425-9c39-48030af82a13?page=1&TM=1335360130323

• My external hard drive has changed its Mac format to NTFS by itself. If anyone else has experienced this?

  I would post screenshots, but I'm currently back up backup (lol) my hard drive to another drive so I can reformat the drive. Anyway, today I plugged my Toshiba Caniva 1 TB external to some organization. I went to delete something (Cmd + delete) and nothing happened. So, I tried to drag and drop it into the basket and received a message saying that the file cannot be removed. It's weird, I thought. So, I open disk utility and discover that my external hard drive has decided to change to NTFS on its own. I tried to eject and reconnect it - that did not work. I tried to restart - which did not work. I thought that my USB hub could be a problem - nope. The only things that have changed since I last used my outside is that I changed the battery in my MacBook, put in an SSD and upgraded to El Capitan. I don't see how one of these could cause this but I thought I would mention it. Anyone who has something similar happens? Thank you.

  The reader not to not reformat in NTFS. If the disk has been reformatted would vanish all your data. I suspect that before you upgrade to El Capitan you ran a third party app that would allow you to use NTFS formatted disk. Once you upgrade to El Capitan the app is no longer compatible with your new operating system. You must download and install an upgraded version of your application that supports El Capitan. Or, you can copy all data from the disk and reformat then for your Mac.

• Satellite M50D-A-10W - display driver has stopped working while gaming

  Hey guys I just bought a toshiba Satellite M50D-A-10W and I have a very annoying problem...
  When I play in dota 2 sometimes I get a massage like: "display driver has stopped working" or answer

  I remember exactly, and the freezing of the game and then screen I need leave the game and reconect. If you can help me guys, I'll be very grateful

  Rare Hi

  This message is certainly created by the installed graphic card driver.
  I can't say for sure why this happens, but I recommend you to reinstall the graphics driver.
  In most cases, this should fix problems with gambling.

  Greetings

• Qosmio G30 - DVD-ROM drive has stopped working

  I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

  He still pulls in, but it will not read or burn discs.

  I received a quote of £360 Toshiba to adapt to a new one that seems generous.

  Anyone know where I could get it fixed cheaper than you?
  Or better yet... anyone know where I can I get it fixed?

  David Hutchinson

  Hello
  This is not an answer to your question but can solve the problem if it is the same that I had.
  In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
  The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
  motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
  The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

  Where there is a similar issue, I hope that solve you it like I did.

• HP pavilion n203tx 15: Amd driver has stopped working and has recovered

  Hello ive been using this laptop for 2 years now and ive started suddenly get this error "amd driver has stopped working and has recovered" and sometimes one of the apps I open freezes and then I get BSOD with errror "AMD pilot State failure" any help would be appreciated.

  my laptop is Hp Pavilion 15 n203tx im using windows 8.1 I have amd radeon hd 8670 m graphics card

  Thanks in advance

  Hello

  Try this

  install the following in the same order

  Chipset: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63965.exe & Reboot

  Graphics: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64573.exe & Reboot

  BIOS: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73288.exe & Reboot

  Or if you have assestent installed on your laptop supports HP run all updates of pilot who.

• Satellite M70-340: display driver has stopped working

  HI, I BOUGHT ALL NEW LAPTOP FROM DUBAI THE MONTH LAST. HIS GIVING DISPLAY PROBLEM BEGAN THE IALMRNT5 DISPLAY DRIVER HAS STOPPED WORKING NORMALLY. MUST RESTART TO COMPLETE SYSTEM RESTORE"

  I DID ALSO DRIVE FORMATTED, REINSTALLED PREDRIVERS. BUT IN VAIN.

  ADAPTER IS INTEL! ATI DOES NOT INSTALL!
  DON'T KNOW HOW TO TO THIS TOPIC AND NOW IT JUST BEDS ONLY BLUE POWER LIGHT AND CRASHES ON STARTUP WITH SCREEN WHITE!

  PLEASE SUGGEST...
  CONTACT on [email protected]

  Hello

  If the reinstallation of the system with the recovery CD does not help, then it is not a software problem.
  This means that some hardware component is defective.
  In this case, you need to take your laptop to the service.

  Good bye

• Satellite A60-652: ati2dvag driver has stopped working

  Hello

  Recently, I have a few problems with my graphics. My satellite freezes and goes to a low resolution with a few colors. A message indicates that the ati2dvag driver has stopped working. After that restart of the satellite shows a blue screen and restarts... same thing happens. Only stop and try again after a few minutes made me return to the normal Windows.

  I tried to look for new drivers, but I can't indicate my model (SA60-652)... is this too old model for the updates?

  Toshiba SA60-652
  ATI MOBILITY RADION 7000 IGP
  pilot ati2dvag (6.14.10.6430)
  Windows XP (SP2)
  AVG virus scan
  Hitman Pro anti-spyware
  ATI hydravision installed but never used :-/
  Laptop has recently increased temperature... I'll deal with that after my final thesis (May 8)

  Please can you help me?
  If you can, please be made clear in the instructions, "I don't know much about computers caus... (PEBCAC)

  Thank you!

  Hi Jeroen,

  I think that your problem is related to overheating rather than a defective display driver. The idea here is that it takes several attempts to reboot, giving the unit time to cool.
  I suggest that you try to remove all dust and debris from your radiator and see if it improves the stability of your units.

  You can download a copy of your display driver of: -.

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK

  Kind regards

• Office Pavilion Elite HPE message: AMD/ATI Video Driver has stopped working properly

  I have a Windows 7 Desktop HPE-410y, this morning, that the flag of the action center was at the bottom of the screen.  I clicked on it and there was a message: AMD/ATI Video Driver has stopped working properly.  He also said I should click on a link for a solution to this problem, but of course when I made the site of HP said that the page does not exist.

  Maybe say if you have in fact noticed nothing else Action Center indicator would be useful.  If it seems to you that the computer was OK and run satisfactorly, then perhaps he had already solved the problem.  Usually reviews can occur if a program did unexpected things and crashed the video driver, then the driver recovered.

  HP site can be set to an old page.  The real driver has not been updated recently on the HP site.

• The screen flashes and goes out, error: "intel graphics driver has stopped working".

  Original title: Intel graphic driver

  My computer screen starts flashing, then goes and then this message appears "intel graphics driver has stopped working" when I try to get the answer it says "windows cannot download solution at Thøis" I tried a lot but he continues to themselves, what can I do?

  Hello

  (1) when encounter you the problem?

  (2) have what troubleshooting measures you tried?

  (3) remember you to make changes to the computer before the show?

  You can try the following methods and check the status of the issue.

  Method 1:

  Configure the computer to clean start State to check software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the above article.

  Method 2:

  Uninstall and reinstall the display adapter drivers.

  (a) start Control Panel, click hardware and sound and then click Device Manager.

  (b) to expand the node that represents the type of device you want to uninstall, right click on the entrance to the unit and click on uninstall.

  (c) in the dialog box confirm the device removal, click OK to start the uninstall process.

  (d) when the uninstall is complete, the site of the factory driver download and install the drivers.

  (e) after installing the drivers, install the latest updates.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• Display driver has stopped working during the game the Sims 3

  Original title: video card? With the Sims 3 ~.

  I bought the Sims 3 and downloaded yesterday. I have played since then, but then the game would freeze and tell me that this ialmrnt5 of display driver has stopped working. So I tried to fix it, and it did not work. Now, he tells me there is something wrong with my graphics card and Sims does not work yet. I keep going from one link to another tells me to download this and that and I don't know what I have to do. I want to be able to play my game, because it's expensive and I bought it only yesterday. Help, please. PLEASE, I BEG YOU.

  -Poprocks26

  I thought about it, are not even worry about this.

  I just needed an update from Intel. It works perfectly now. :]