My fan on the desktop is constantly noisy

Similar Questions

• M4: Regulation of the CPU power and fan - tablet is running hot and noisy

  My M4 is running hot and and the frequent active noisy fan in the normal power setting. This allows to improve some during the definition of the maximum energy saving options: battery life. But still the fan starts running and short relatively frequent. The fan noise is high enough to be quite irritating in a quiet environment.

  Is this normal?

  Also my M4 allows on occations to memorize the fan.
  Cpu temperature drops from 58 to about 44 C after awhile, but the fan still works.
  However, if I go on hold for 1 second and back, fan control is reset and the fan turns off.
  Yourself or others behave the same?

  Conditions are improving a little tuning down the cpu down voltage using hardware control (NHC) Notebook
  (http://www.pbus-167.com/)

  East of problems common to the M4 or Tecra series?

  GeirS

  Hello

  If the operating temperature of the machine goes upward, so that the cooling fan turns on.
  Many parts for example produce a lot of heat from the graphics card.
  In addition the CPU temperature increases if many processes are running in the context of the operating system or if you are working with programs (i.e. playing games).
  If you have a laptop computer with a processor that is hot much faster one and then another, it must be cooled more often.
  You can believe me :) It's not a fault!

  If you wish, you can try changing the cooling method parameter in Toshiba power saver utility.

  Best regards

• Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

  Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

  To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

  That's what * I * would call cleaning and optimization of a Windows XP machine:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Desktop HPE-210y noisy CPU fan

  I bought my house in 2009.  In recent months, there was a buzz in the chassis.  I thought it was a hard drive failed, so I replaced it, but the noise continued.  In fact, it's the CPU fan.  I cleaned the dust off everything inside, including under the fan heatsink.  The noise continues.  Should I replace it?  It seems to be fixed on the heat underneath sink.  If I do not need to replace it, how to find the right part? When I enter my serial number in the search of part of HP, it lists 30 components. It is said the cooling fan system is 5188-3722 and says that it can be ordered from HP.  It also lists the "heatsink for AMD", 575691-001. It then lists on the fan itself, the STROKE part number.  In another search using a BOM component, I see "Cooler STROKE AMD 125W PCB AVCFAN", Assembly p/n 466715-001.  What exactly should I order? Once I find, I can replace it myself or I have to find someone to do it?  (I replaced the memory and hard drives). Thank you.

  Pavilion Elite HPE-210y

  8 GB RAM

  ATI Radeon HD5450

  Windows 7 Home Premium 64-bit

  1 TB SATA

  Hello @kjd_1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are looking to replace your radiator and fan system on your desktop HP Pavilion Elite HPE-210y PC. The heat sink is the heatsink and fan assembled between them then (5188-3722) system fan is the fan on the rear part of the housing. According to the noise is coming from will depend on who you are replacing. The system fan is NOT the fan on the heatsink.

  I do not think that you should really have a problem replacing the heat sink, just make sure you clean and replace the thermal grease while you're there.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• How can I stop my icons on the desktop of reshreshing constantly?

  I have a Compaq Presario CQ5300F with windows 7.  The desktop icons began to refresh every minute.  How can I stop this?

  I have never so ranked.  I down loaded another stripper 'malware' (called Malware... something, something...) I forgot what it was) that had a 30 day free trial.  He removed a number of items.  The freshness is stopped.  Then, he started again 2 days later, so I removed this malware remover, and I have not had this problem since.  I did have this problem what for?... 30 days? 45 days?   something like that.  I forgot that I had posted here until today when I received this email indicating that a response had been a response.   I use Webroot.

• Fan does not not on the desktop Pavilion a1747C

  I got a message saying come the fan lights not, if you want to continue press F2.

  I want to know what fan it is follows the computer.

  I got this message a couple of times, but not in the last two days.

  I looked at the fans in the back and the two are running and I put a flashlight on the side and one on the

  processor running at the time I looked, but it was after he came by himself.

  There is no dust does not collect on the fans, had repaired and installed the new hard drive and put in level to windows7

  About 6 weeks ago. I bought the PC in February 2007.

  Yes, a CPU fan can be replaced very easily and inexpensive. If it's a bad sensor on the motherboard, it is another matter. Probably the only solution would seek in the BIOS for an option to turn off the analysis.

• Very noisy fan on the back...

  Most recently, it happened. I backed up my computer in my apartment at College. I recently installed a GeForce4 TI 4200 to replace my GeForce2 MX (I don't know if this is related to the problem, it is more likely is not, but it seemed to have started at around the same time). In any case, when I turn on the computer, it starts normally and goes to windows XP. 30 seconds after the start of XP, the fan at the back of the Tower (in the middle of the back, not the top one) starts making this loud snap. It seems to make stronger and stronger every day, or it's maybe just me. After a few minutes, the noise starts to decline slowly until the fan was again quiet. Usually, I stick a thin and in object to see if it still turns, and it is =)

  Why is this happening?

  That looks like a dying fan.  Especially since the noisest on start up. As soon as you can change

• All chop 'out' while playing games full screen, go to the desktop, stands and vice versa

  Data sheet:
  Intel Core i7-860/2.80 Ghz
  8 GB OF RAM DDR
  GTX260 896 MB
  Windows 7 64 bit
  BENQ HD Monitor G2420 (23.6 inch widescreen 1920 x 1080 resolution)

  Would appreciate any help that comes with the following games:

  Crysis: Warhead
  FarCry2
  Call Of Duty: Modern Warfare 2

  While I play it constantly cuts out of the game, the desktop with game apparently miimised in the taskbar, it goes back to the game, sometimes it freezes completely. The display flashes INPUT: DVI when this happens, I tried to run the games in lower resolution, but that does not change. Is it something to do with the 64-bit platform running the 32-bit games? Or is it the settings that I have my omnitor on? Very frustrating, please help!

  Thanks in advance

  I had this problem and could not understand what was going on, until I noticed that I had Firefox running in background. That and all my steam games starts and stayed until the exit. Hope that works!

• XP... The desktop icons will not put

  XP... The desktop icons will not put. I did a lot of research on this issue, read the different responses on many forums, including and have tried much of the recommendations... I'm not familiar with the functions of establishment of the arrangement of the desktop icon and this is the first time I met this kind of problem. "Lock Web items on desktop" is checked, "Snap to grid" is not checked (my preference, but I find that it will check mysteriously itself after the icons rearrange themselves to the left of the screen, apparently by making use of automatic reorganization, even if it is not checked), I tried securityguy14 registry change response dated December 7, 2009 , have installed and use the program "Icon restore" that changes the Recycle Bin, my computer, and another icon of office, I do not remember to add a backup/restore function for the setting icon on the desktop... is what bought me a brief period of mental health before they rearrange themselves after a few constantly unidentifable strike entered sometimes without "rhyme or reason", not unique to anything, preventing me from shrink down to a specific cause. I conducted several audits of malware with paid and free programs and there is no indication of anything invading my system, it works fine other wise. Help!

  Hello

  You can perform an upgrade in-place of Windows XP:
  How to perform an upgrade on the spot (reinstallation) of Windows XP

  http://support.Microsoft.com/kb/978788

  Run a repair installation will not damage files and applications that are currently installed on your computer.  However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

  http://support.Microsoft.com/kb/312369

• Rocket is no longer present on the desktop

  Hello

  I use Ark Linux 2008.1 with KDE 3.5.9. When I first bought this rocket, I bought it for Linux support. It worked quite well with the Auto-Detect USB Mode. However, it displays more than on my desktop; in fact, the "rocket" doesn't seem to know that it is connected to a computer. Fresh, it allows me to run as if it was not connected to the computer. I tried by him plugging MSC mode and MTP mode (I understand that MSC is recommended for Linux?). In addition, it appears on the desktop or in my file/etc/fstab. Moreover, when I do a dmesg from a terminal, it does not seem to show a connected player, that I find it strange because every MP3 player that I have connected to any Linux distribution is always presented as a flash flash drive or MP3 player.

  I recently discovered on the new 1.01.15 firmware and I would like to be able to upgrade because I'm a BIG fan of Ogg Vorbis and I already ripped all my CDs to Ogg Vorbis format, but I can't do that unless I can get it to recognize that it is connected to the computer.

  I did some tests on my computer and discovered that it was not load the USB drivers. To manually do a ' modprobe echi_hcd & modprobe uhci_hcd' solved the problem.

• Cannot change the font color on the desktop icons

  I am running windows vista. I can't change the font as in windows xp. No matter if the background is dark or the police is always black... Help!

  Hello

  Thanks for posting the question in Microsoft Answers.

  I apologise for the inconvenience.

  Unfortunately, you cannot change the font color of desktop.

  Because desktop wallpaper images have different colors, it is easy for the colors of unreadable fonts if they are on top of the same color in a background image to display. For example, a black font on top a dark part of the background image or a white font on a white part of a background image.

  The desktop icon fonts are dynamic and show white on dark background and change in white with a shadow effect black on a light background.

  In previous versions of Windows, it did not matter what color you chose to fund policies, some would still make invisible because of the background color of a desktop wallpaper. The user was constantly moving icons around the desktop computer to another colorful area where the police could be read. This was the source of a large number of complaints from users asking for a policy that was still visible, regardless of the color that was behind the police.

  However, you can change the theme and see if that helps:

  Change desktop theme:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Hope this information helps. Let us know if you need additional assistance. We are happy to help you.

• Rearrangement of the desktop icon

  How can I get my computer constantly rearrange my icons on the desktop by name, when I take the time to arrange them in a special, convenient order? They don't reorganize until my computer is restarted in an update or stop. Because I put in sleep mode most of the time, it is not a constant problem, but it is quite consistent and quite aggravating.

  Ah. Although the noise of the rest of your post, however, it seems that your computer reorganize automatically verified. Mine does not work. Should I check it, restart, reorganize, uncheck the create system restore restore, point?

  NO, do not check rearrange. I mentioned it only because you have it set that way.
  If you do not, leave it unchecked.
  Simply make the icons to reorganize, restore, point and then system restore. See if the icons are still in place this time.

  t-4-2

• Need of the good, the bad and the ugly on the desktop E9150T

  For those of you who bought a desktop computer HP E9150T can you please share the pro and con with me?

  I've waited long to upgrade my old built generic XP desktop and I'm looking at HP E9150T and the Dell Studio XPS as spare parts.  Although the E9150T has more memory on their graphics card Dell is currently $150 cheaper with hardware quite comperable.  My problem with the Dell Studio XPS is reported that periodically the system overheats causing the fan to kick at such a high SPEED that users say it sounds like an airplane taking off.  Unfortunately it doesn't seem to be that a customer consumer out there about the E9150T, so I don't know what he expected and wants to carefully weigh my options until I went to bed a lot.

  In addition to the problem with the fan, I would like to know anything else, you can share with me regarding the system and support by HP.  Note that I am not a serious gamer and I don't think I have overtax my system with everything I do.  I'm really looking for a system that will meet my needs for a long time.

  Moondoggy69 wrote:

  Here's a question a little.  All my previous systems were built generically, but I don't have one of them built myself.  I received answers on other forums who say that it is better to stay generic than buying and a Dell or HP even if it is custom built to specifications as the two in question would be.  So my question is this...  What you give up by buying a unit like these two from Dell or HP?  I've heard stories about parties are of lower quality than what you can buy in a generic way, I've heard of lack of scalability or system being owner and will use only parts provided by themselves and I heard that HP and Dell purchase stripped of motherboards from generics like ASUS and paralyze the bios in them.  My concern with HP or Dell, is that I would get a reliable system of quality with good quality parts.  I have never overclocked one of my existing systems and the only real reason why I never bought a HP is before I could not find a system "off the shelf" that met all my criteria in the way form or version of the operating system installed.  With the e9150t of HP and Dell XPS I get little close to what I have ordered a generic system.  I saw a system similar to the e9150t who had other CPUS in them and they all seem nice and seems quiet but I think I might bother some people if I start the case of cracking and search.  Any idea would be appreciated.

  It is best to avoid 1st generation X 58 (high-end) Board of Directors of a big box-manufacturer.

  1. lack of refinement.  This is a good market version a Committee of Asus OEM.  Some early production bugs are resolved with BIOS updated frequently if you have a retail Council.  A Committee of OEM HP can get one or two updates.  There is no ideal Board, but 1st generation tips are still buggy.  BIOS frequently update helps, but does not eliminate the frustration factor if you are affected by the bug.

  2. management of poor fan / thermal with a Committee of OEM.  You can adjust the fan speed and the type of fan (-3 or 4-pin PWM) with an enthusiastic Committee.  A quality Retail Council has better cooling on the circuit of PWM chipset (greater stability to high temperature of case).

  3. limitation of output power from the PSU OEM.  Better nutrition is capable of driving two high range GPU.

  4. no oveclocking ability.  I7 920 D0 entry level should be able to operate at 4.0 GHz with a detail of good advice and a CPU cooler.  It is a huge boost in performance compared to 2.66 GHz stock speed (time of Super Pi 1 M 9 seconds @ 4.0 GHz vs 16 seconds @ 2 .66GHz).

  5 pre-installed crapware.

  6. no choice of OS.  Vista is dead.  The future is W7 SP1 (2nd quarter 2010) If you must have the latest OS.  I prefer Windows XP Pro 32 or 64-bit.  It is widely compatible with programs in May because of his age.  It is significantly faster than Vista or W7.  He joined no digital rights management.

  7. poor implementation of the Portable Media Drive.  It is a USB 2.0 removable drive, whose speed is capped at USB 2.0 real world of 23 MB/s speed.  USB 2.0 is a technology for ten years.  A high-end removable player should be based on the eSATA, allowing you to transfer data at the speed of the hard drive (currently 60 MB/s to 110 MB/s).  It's 3 x the speed of USB 2.0.

  8 questionable clientele with the manufacturer of big box (work with a monkey phone level 1st reading of the guide by script).  A local custom Builder should know that the PC inside and out and give advice on the future upgrade.

  9. lower case ventilation.  A good custom case (Antec 300) has four 120mm fans and a 140mm fan.  If you set the speed of the fan on the motherboard at 1200 rpm, the platform will be whisper quiet even at full load.  There is a fan directly in front of the hard drive to maintain external work under 40 ° C in the warmest room.

  There is always something new and better each month in the calculation of the PC.  You can assemble the most stable and oriented platform value based on knowledge today.  These large PC were designed months ago.

  It is difficult to compete with the PC to large areas in the range of $500 of overtime because of the fixed cost of work.  The big boys can buy components cheap with a huge volume discount.

  Once you break the barrier of $1,000, then the advantage swings to the custom test.  The big leagues at the price of these platforms with extra fat.  HP can still make $ on a platform i 920 even with a discount of $400 - $500 off the price of the web.  Most of the custom builders will not charge you additional labor for an expensive drilling rig (unless you specify the cooling water).  As a result, thi $300 "discount" can be used to buy a best MB, PSU, HDD and GPU.  Also note that all the components of quality PC come with 3 year warranty frm.  This is much longer than the standard 1 year at HP.

  You never have to deal with a custom platform.  You want a disk Western Digital Carvia Black 7200 RPM 640GO/32 MB cache?  No problem.  You want an overclockee platform with no more noise 30dBA @ 100% CPU load (inaudible in a silent room)?  No problem.  Try this with DELL, HP or any manufacturer of big box.

  Personally, I would not spend $ on an i7 920 drilling rig.  Unless you are a pro video editor or a super - duper Hard Core than Gamer, a custom bicoeur overclockee Intel platform would be my 1st choice.  For about $600, you get a 4.0 GHz overclocked CPU that could calculate the number Pi to the digits of 1 M in 13 seconds.  A stock HP 920 i7 handles this task in 17 seconds.

  Put the $ saved in a savings account.  Expect that your 4.0 GHz dual core CPU becomes the bottleneck before you upgrade the MB, CPU and RAM (maybe 3-4 years).  When you do that, you'll probably looking at a 6-8 CPU core.  Scalability a rig is a fool's game.  Buy only what you need today.  Go with eSATA if you need external storage.  USB 2.0 is only suitable for the smallest USB.

• Recent Places icon appearing on the desktop when ever I go to recent locations in the Favorites

  When ever I go to recent locations in the Favorites page to clean my memory this recent locations icon appears on the desktop WITHOUT option to right click and delete OR drag it to the trash

  I found a tutorial on the web that provides a way to remove the icon
  1.right - click recent locations in the field of Favorites tab in Explorer.
  2. click on "send to", and then select Desktop
  This will automatically replace the existing icon and replace it with a DESKTOP SHORTCUT
  3. simply delete the shortcut
   
  But this issue should be fixed in next update, or maybe it is set in point 8.1 of Windows because it's REALLY BORING to this procedure whenever you clear recent locations

  Thank you very much! To solve my problem... As you have said, I hope there will be an update so that we do not have to constantly...

  Much appreciated, Cheers

• The computer starts very noisy until Windows starts

  Starting the PC with new GPU Quadro - YouTube

  Watch the video. As the computer starts, it becomes very noisy. I thought it was the GPU as a first step, but it doesn't seem to matter which GPU is installed. This has happened for a while now because I have built this PC a few weeks ago. It was very quiet at first. Could not yet say that it was on. And now this terrible noise that I can't explain.

  I removed a GPU, then the other. I guess it's the motherboard or a fan making the noise - I can't imagine moving parts on the motherboard that could make that noise. Anyway, once Windows has fully booted most of the noise dies down with the exception of a little rattle noise. But not as quiet as it once was.

  I posted on forums of PNY and NVidia on this, but I don't expect much response because it is looking as if it was not GPU bound at all. I'll try ASUS then

  core i7 - 4930 K 6 3.4 GHz processor

  ASUS P9X79 - E WS motherboard

  64 GB of Corsair Dominator RAM

  ASUS Direct CU II OC / 3 GB GeForce GTX780

  PNY Quadro K4200

  Intel 530 OS SSD series engine

  Good news! It was one of the case fans. Interference with a cable or on the side of the cover. Of course, the less accessible fan, but I had