my firefox closes when I close the window, but the process is not stopped since I got the update to firefox

Similar Questions

• I get error code 802000D when I install the updates of windows. How can I fix this error?

  I get error code 802000D when I install the updates of windows. What this mean and how can I solve this problem? Please answer. Thank you.

  Hello

  ·         Did you change your computer before this problem?

  I suggest to reset the Windows Update components and check if it works.

  See article:

  http://support.Microsoft.com/kb/971058

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.

  I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.

  You can run the latest version of iTunes for your version of Windows, but you are not running the latest version of iTunes is available and it's iTunes 12.3. You must run Windows 7 at least. I'm not a Windows user, but I think 7 is newer than XP.

  Check this.

  http://www.Apple.com/iPhone-6/specs/

• I am still getting error code 8004ff83 when you perform the update

  I am still getting error code 8004ff83 when you perform the update

  I read that in safe mode, it would be possible to do the update. What is safe mode?

  Hello

  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• When I check the updates, it goes into endless loop and never off.

  Original title: windows updates

  When I check the updates, it goes into endless loop and never off. Even if there is no new update, he said usaly. What is gpoing?

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

  I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

  I tried to take different paths, as via the Control Panel, but it's the same thing.

  Operating system?

  Try the following: -.

  Open search Vista Start Menu Bar and type: RUN

  Click OK

  Type the following lines, and after each one, click OK: -.

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  No guarantee

  TaurArian [MVP] 2005-2010 - Update Services

• I have Lightroom 4.4 on my Mac laptop. It came with the purchase of a Leica camera. When I check the updates, the answer is that there is no update available. Download Version 5.7 of Adobe's Web site with no problems?

  I have Lightroom 4.4 on my Mac laptop. It came with the purchase of a Leica camera. When I check the updates, the answer is that there is no update available. Download Version 5.7 of Adobe's Web site with no problems?

  Your license for the 4.4 release will not work with version 5.7, you can download it without doubt, but if you do not have version 5.7 download then it won't do much good.  If you do not have a license for it so you won't be able to use it beyond use of the trial.

• I have CS5 and adobe update reported that I have several updates of loans - when I started the update, it failed at every update.  Please notify.

  I have CS5 and adobe update reported that I have several updates of loans - when I started the update, it failed at every update.  Please notify.

  Please see:CS5 updates fail

  Troubleshoot update | CS5, CS5.5, CS6

  I hope this helps.

  Concerning

  Megha Rawat

• Adobe said I need an update in order to open a file specific .pdf... when I run the update is says I have the latest version for my OS. ???

  Adobe said I need an update in order to open a file specific .pdf... when I run the update is says I have the latest version for my OS. ???

  Alternatively, save the file of Chrome on your desktop - the one with the message. Then, open in Adobe Reader. It will not be solved by the upgrade, even if the message you tips in mind as well.

• I get an error code 50 when I install the update

  I get an error code 50 when I install the update

  Error: "unable to install". Creative cloud office

• recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  Hi mikedav,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

  Method 1:

  Follow the instructions in the link below which will help you solve the problem.

  Tips for solving problems with Internet Explorer

  http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

  Method 2:

  Follow the instructions in the link below to optimize Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• reinstalled my windows but forward button does not work

  reinstalled my windows but forward button does not work or hibernation modded shows in power options

  Hello Rahul,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Let us work as a team and try to solve this problem.

  If I understand correctly, you have problems with node in sleep and extended in Windows XP.

  Please read the following article and see if that helps:

  How to solve the problems of hibernation and standby in Windows XP:

  http://support.Microsoft.com/kb/907477

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• I have vista os, when you perform the update of windows, it will fail to load 4 updates and get code error 646. How to solve?

  error 646 when windows update, fails to 4 updates. Using vista OS. Help

  Hi cjvtex,

  Welcome to the Microsoft Answers site!

  This problem occurs when the Windows Update Wups2.dll agent file is incorrectly registered in the register. Because registry files that match
  to the Wups2.dll file are missing, update facilities are unsuccessful. Follow the steps mentioned below to resolve this issue.

  Save the Windows Update files

  1. Click Start and type notepad in the box start the search.

  2. click on Notepad in the list programs.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S

  REGSVR32 STINKS. DLL/S

  REGSVR32 WUAUENG. DLL/S

  REGSVR32 WUAPI. DLL/S

  REGSVR32 WUCLTUX. DLL/S

  REGSVR32 WUWEBV. DLL/S

  REGSVR32 JSCRIPT. DLL/S

  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on the file menu, click Save as.

  2. in the file type list, click all files.

  3. in the file name box, type register.bat.

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or confirmation, type
  the password or click on continue.

  6. try to install the updates again.

  Access this link to thread for more solutions and ideas to resolve the error 646. It can be very useful for you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d  

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Vista downloads of updates and then said: I have to restart the computer for the updates to day work, but when I do the updates do not work at all and the computer has trouble again restart.

  Cannot update Windows Vista, with the update functionality.

  Hey Charley,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you can not install Windows updates.

  This problem can occur because of inconsistencies in Windows Update.

  Perform the steps from the link below and see if it helps.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Warning of Chkdsk.
  
  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Hope this information helps.

  Answer to us if you have problems with Windows Update or any other issue of Windows, and we would be happy to help you.

  Good day!