My guard computer shut down on its own. See report:

Similar Questions

• my guard computer shut down on its own

  After that connect to my home computer, I try to do some thing/all and it turns off. screen empties and turns itself off. I then restart the computer by turning the button and after the same amount of time it turns off again. It continues to be. I run a scan complete using the basics of microsoft X 2, but it continues always to be.

  Hi Roger,

  I'm almost positive that this is not caused by MSE, and probably not even by malicious software.  Your best bet is to assume that for the time being and come back here if it's proven to be an infection or that MSE is the cause.  The same thing happens if you start in Mode safe mode with networking?

  My first inclination is a certain type of hardware problem or pilot - that's what I would put my money (even though it may certainly be associated with software/OS).

  Good luck!

• Computer shut down on its own?

  I have a Toshiba Satellite laptop PC series and I just got a new AC adapter for it (Best Buy, never), came home, plugged in, and ever since then my computer has been stop itself. No matter what I do just turned off, no warning. I turn it back on after a minute or two and sometimes it starts up again, sometimes, it starts to and then everything stops again. I don't know if it's the AC adapter or the stupid update that I got from Microsoft that I always forget and end up downloading (whenever I do my computer goes haywire). I'm done to restore after the update so I don't think that its that. The other problem is the adapter, it is universal and when I plug it into the computer, down in my opinion it shows as it is plugged in, not charging, then a few minutes later he shows as clogged, load and this alternates back and forth, the minute I unplug the cable my computer turns off again because my battery does not have enough of a charge. I have also problems with wireless connection since one of my updates was done, my computer just stops picking up the signal from my router. I need help! Thank you in advance!

  Hello

  Good luck to all of the questions are the power adapter which seems to be malfunctioning. Bring him in, with your laptop,
  and get one that works correctly.

  Power fluctuations can be the cause of all your problems.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HP laptop - 15-af152nr: computer shut down under its own

  While working on my computer, it is just off and restarts again.  Any program that I use or if I'm on the internet.  Simply, he stops and restarts.

  You're welcome, @burkeboy.  It should be in a very dusty environment in need of a deep cleaning it soon.

  I suggest you to contact the vendor for assistance.  You should not be having problems with a new computer under any circumstances.  If you bought on HP Store, you must call the HP Customer Assistance Service.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• I received an error message and my computer shuts down on its own I recently bought this less than a month and nothing but a blue screen with the error message__ next

  BCCode:fe
  BCP1: 0000000000000002
  BCP2: FFFFFA80060EC830
  BCP3: FFFFFA8005E38C60
  BCP4: FFFFFA8000733B6B0
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\030310-16473-01.dmp
  C:\Users\Tonya\AppData\Local\Temp\WER-36894-0.SysData.XML

  HOW CAN I SOLVE THIS PROBLEM?

  Disconnect all USB devices and see if the behavior stops.  If so, one of your USB devices likely is faulty or has a bad driver. Search for updated drivers.

• My laptop is operating completely normally and would never shut down on its own. __But when I try to play a game or during the plauing sometime example pes 2010 or need for speed, my laptop some time Shut down.

  My laptop Qosmio F50 works completely normally and would never shut down on its own.
  But I try to play a game pes 2010 example or the need for speed, my laptop long closed.
  It was good before, but after rebotting my computer this problem just recently started...
  I have Nvidia Geforce, DirectX 10 and all recommended Requirments for the games but sometimes I start a game or after 2 or 3 housr game it would be completely Shut Down My computer and when I would turn on the computer, he would say that it was not Shut Down normally.

  Alhajji,
  They suggested to do a factory restore, if a valid step to do.  I know this isn't the most fun thing to do, but if you restore the system failing factory (clean install of the operating system).  Then, run Windows update and update drivers.  At this point, you can install a game and test.  If the problem persists, it would look to be a possible hardware problem with the system.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My guard computer shut down unexpectedly when I play games.

  My guard computer shut down unexpectedly when I play games. Now it is not always the case, just sometimes. The other day I was playing Sims 3 all day, literally, with the graphics settings maxed out and had no problem. The next day, he would crash as soon as it finished loading, even with the graphics settings at the bottom. Today, it was working fine this morning and now it crashes again. I had the same problem on and off with other games as well, Halo 2, Kings Bounty, UT 3. Here is my system:

  OS - Vista Ultimate 32 bit
  Processor: Core 2 Quad Q9400 @ 2 .66GHz
  RAM - 4 x 1 GB PC6400 DDR2/800
  MB - MSI P7N SLI - FI
  HARD drive - 150 GB x 2 (Raid 0) Raptor 10 k RPM
  PSU - 1000 watts
  GPU - NVidia GeForce 9800GT 1 GB (x 2 in SLI)

  And the error I get from Event Viewer:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I got the error almost everyday since I got the computer, about 10 months ago, but it only blocks the computer if I play a game. I tried the 'fix' that removes the WMI event viewer 10 error, but everything done was make sure the error is not logged. I also tried another fix I found me delete the files in the repository, but that no longer works. I also run scans of complete system of virus/malware Spybot Search & Destroy and AVG 8 and verified the updated driver for my hardware. I also ran diagnostic tool memory. Who has good/clean/current. Can it be fixed or what I have to reinstall the OS?

  Hi JerHekSr,

  Thank you for using answers Forum.

  The first thing that comes to mind would be to check the motherboard manufacturer for an update of the firmware/BIOS.

  The error message mentions "loadpercentage > 99' which looks like you are running may at maximum load of the CPU while the game and that is the cause of the crash. You could try a clean boot to prevent the using CPU resources while you play to see if it makes a difference of strtup programs.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  I hope this helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my computer shuts down by itself idle, see event log the many different mistakes some cry

  Windows 7-64, HPe 130F, COMPUTER SHUTS DOWN WHIE IDLE No. REASON APPARENTE has critical errors and mistakes of warning in the event log.

  Hello

  Just to confirm if the problem lies in the operating system or not. Please go ahead and enter the BIOS. The link provided below shows how to enter the BIOS.

  http://support.HP.com/us-en/document/bph07110

  If please enter the BIOS and press F5, it asks if you want to set the default setting, press YES. Press F10, then enter it will re-start the comp. Be in the BIOS and see if the computer stops.

  Guess you didn't do all the hw of the stock changes.

• My guard computer shut down

  My computer guard shut down without any reason. He frequently turned off before I even get to open a session. Can someone please advise. Checked security and computer free of viruses etc.

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Using safe mode to troubleshoot - repeatedly press F8 when you boot.

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My guard computer shut down when I'm not working on any topic. It also stops when I start by putting.

  I can work on e-mail or anything either, then all of a sudden it stops. Then he comes after the message comes on saying it closes unexpectively.

  When she stops when I start by putting it on the same thing happens.

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to find error messages in the event and after feedback from the observer.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

• My guard computer shut down for the past 3 weeks. I have not installed anything new. I get a blue screen with the PFN_List_Corrupt.

  More information about the problem:
  BCCode: 4th
  BCP1: 0000000000000099
  BCP2: 00000000003E667F
  BCP3: 0000000000000000
  BCP4: 00000000003E677F
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Can anyone help.

  Check in the most recent discharge has not been activated.  What are the results of the auditor/Reset?

• BlackBerry Z10 Z10 shutting down on its own

  Hello

  I am facing a horrible problem with my z10, it stops automatically and never starts until I put in charge. I don't have what happened to her. I tried but to no avail. Help, please

  @bhargavsamm

  What is happening is that your gauge from the battery of the device is turned off-sync with the actual load of the battery. Connect to your OEM wall battery charger and although still connected and powered, the battery a minute to restart. After rebooting to load 100% leave.
  Thus the reading resets false accusation. You may need to perform this procedure, 2 or 3 times.

• When I try to burn a movie, my computer shuts down. This didn't happen with more short films, but this one is about 84 minutes.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  When I try to burn a movie with videos imported from different sources, the computer shuts down after 10 minutes.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  limespider wrote:
  When I try to burn a movie, my computer shuts down. This
  didn't happen with more short films, but this one is all
  84 minutes.
  =======================================
  Sounds lke a question of system resources.

  Large, complex projects can cause problems... it can
  be worth a try to create several small projects and save
  each of them in the format .wmv movie to a folder on your hard drive
  drive. When you import clips .wmv collection in DVD
  Machine to each of them becomes a scene (chapter)... you can
  have up to 18 scenes.

  Besides rendering video is time CPU and could
  initially be an overheating problem that could also result in your
  computer to close.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• my computer shuts down about 2/3 of the way after that the progress indicator starts and stops... any suggestion as it turns on again?

  Try to update of Itune, update got stuck, I turned to the computer off, impossible to restart... the indicator stops about 2/3 of the way and the computer shuts down again...

  Start Safe Mode removes the system caches that can help.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to update iTunes.

• My computer shuts down is no longer with button closure

  My computer shuts down is no longer with button closure. Works only with button on the computer case.

  * original title - system update updates microsoft windows *.

  Hello

  1 are there any changes or updates made on the computer?

  2. what operating system is installed on the computer?

  3. what happens when you try to shut down the computer?

  4. do you get an error message? If Yes, what is the full and exact error message?

  Step 1:

  Try restarting your computer in safe mode and check if the problem persists.

  a. restart your computer.

  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Advanced Startup Options.

  c. using the arrow keys, select the Safe Mode option.

  d. press the Enter key on your keyboard to start Windows Safe Mode.

  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows goes into safe mode.

  f. check if you still have the problem.

  If it works fine in safe mode try performing a clean boot in order to find the cause root.

  Step 2:

  See the article about how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: when the diagnosis is complete do not forget to reset the computer to a normal startup.

  If the problem is not resolved, please provide more information to help you best.