MY GUM BARELY WORKS!

Similar Questions

• Thunderbird barely works, constantly freezes

  Thunderbird freezes does not respond when I do anything, such as clicking something or even to move the mouse. It works very well for the first few seconds after it starts but slows down immediately and constantly freezes. I rebooted in safe mode and it seems to make the problem go away. I use McAfee anti virus and have it turned off in the menu Add on, but I'm having the same problem. I started having the problem this week. Thunderbird also now use about 30% of my cpu when it runs. I have a processor I7 with 8 GB of memory.

  https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

• After auto-update to 38.01 - Firefox barely works.

  I upgraded somehow 38.0 conducting with exactly the same way, now. I huge lag when typing in the search field and incredibly slow page loading. IE works perfectly (well, as perfectly as a link with known current issues in this node - but it's an ISP issue). I tried a totally new facility 38.0 and 38.01 remove every trace of Firefox via the run / % appadata %, everything Firefox-associates of the HD (x 64 Moreover etc.) and I am puzzled. IE load a little slowly, but as stated before, known problem with my connection sometimes. Even using Firefox functions in menu options takes 7 to 10 seconds to appear. A new tab is taking, once again, seconds to open.

  I * was * running Adblock Plus 2.6.9 BetterPrivacy 1.68, EPUBReader 1.5.0.6, Norton Toolbar 2014.7.12.14, NoScript, 2.6.9.22, Self - Destructing Cookies 0.4.7, StumbleUpon 4.19 and Xmarks 4.3.6. Only the Norton Toolbar has been disabled on the auto-update, which I activated. Then I disabled each add-on which did nothing. I tried to reinstall without the complete brainwipe 38.01 first in case I had a file corrupted, but... Well, no change, same with two virgins installs of 38.01, then 38.

  I just ran a complete system scan of Norton - just 33 rejected of IE (ugh). There is not much I can add have acted a bit hastily just wipe everything - but in my defense, I was always able to fix any FF / nitpicking trouble myself (not afraid to go in the bowels, where this is necessary to change the values healthy from authorized sources) when they took place. Usually, a new installation circled if things start looking really bad, one or two times over the years, I had to serve and leave of completely, but this is the first time I had this works do not at all...

  I know there is probably nothing that someone can suggest in particular, but I hope!

  Thank you for following up - can try you with this driver directly from nvidia GeForce 8400 M G graphics card:
  http://www.GeForce.com/drivers/results/82468

• Spotlight search barely works, preferences are correct, nothing set to private... Please help

  Until I updated to El Captain, I have not had any problems with the search in spotlight. He was so helpful. As a busy student, I need to access random files throughout the day, and now they don't show up.

  I checked my preferences, and everything is converted (boxed) check... I have nothing behind closed doors.

  Can anyone help please?

  Thank you

  !

  Have you applied this information to try & re - index the folders in your system?

  • Focus lights: how to re - index folders or volumes - Apple Support

  The capacity of computer hard disk becomes full of content to slow

  most of the things in the system? You have a good backup of your computer

  one offline archive, and have a backup Time Machine separate as well?

  Spotlight indexing will continue to operate?

  There is also another way to rebuild the index on OS X; Here's how in a Terminal:

  https://www.codelibrary.me/2015/07/01/rebuild-Spotlight-index-on-Mac-OS-x/

  If you are not familiar with the Terminal or command line, you can try other methods

  or learn more about how it works in your OS X before trying it. Errors can be bad.

  Good luck & happy computing!

• Sansa Clip barely working

  My Sansa Clip works more yesterday, I don't think it was even after connecting it to my PC. The problems:

  • When I try to play music, it starts in mode 'break '. Won't even play when I 'force' in playback mode
  • slow start and stop times
  • I can connect to my PC, but the only display of file is DevIcon.fil (182 612 bytes)

  Can't use it and I have no ideas left. It is completely charged, about 40% used space, the firmware version is 02.01.32F.

  On your Clip, try the settings-> Format.  Note that any music currently thereon is erased.

• I left my computer idle for 1 hour, that it crashed almost barely work, resulting in a blue screen notification when I rebooted.

  Windows 7 ultimate 32-bit sp1. 3 broadband mobile connect on a dongle. After leaving my computer for a while connected to the internet with IE 10 working with 4 open web pages, my CPU was running at 100% with 85% used by 3 to connect even though it has lost its connection. interface 3 connect frozen (not for the first time). I managed to use the Task Manager to close my IE browser and 3 connect it took awhile.

  problem event: blue screen

  OS: version of the 6.1.7601.2.1.0.256.1

  Local ID: 1033 BCCODE: 9f BCP.1:00000003 BCP.2:84D87C10 BCP.3: 82D3BAEO BCP.4 851713 B 8 OS version: 6_1_7601 ServicePack: 1_0 product: 256_1 more information about this event at C:\Windows\Minidump\011213-37671-01.dmp C:\users\shine\AppData\local\temp\WER-119187-0.system.xml

  Hello

  Thanks for posting the request in the Microsoft community!
  We will guide you to solve the blue screen on the computer notification.

  1. don't you make changes on the computer before the show?
  2. What is the brand and model of the computer?
  3. what anti-virus software is installed on the computer?
  4. what happens when connected to the Internet?

  Try the suggestion to solve the problem.

  Blue screen (crash) can be caused by due to a lot of reasons. Some of them are the following:

  1. a device driver obsolete or bad conduct.
  2. computer viruses.
  3. a corrupted program.
  4. a problem with your computer's memory.
  5. hard drive or the motherboard is corrupt.

  You can try the suggestions in the link and check.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive if you can. Defective sectors found while making the disk check would result in a loss of data.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you need further assistance, please answer and we will be happy to help you.

• Is it normal to use more 9 000 000 k of memory (private beach) when working on 3-4 photos with about 10 to 12 layers when CC running?

  I started using CC in December with absolutely no problem. In April, CC suddenly started crashing on me when I was running some actions that I used for years. My first thought was that my computer was going badly. This began a two-month process to eliminate possible computer problems. Patches have been as follows:

  Installed new SSD.

  Installed the new disc storage of 2 t.

  Install the new video card and power supply to run the new video card.

  I am operating Windows 7 with 16G of RAM on a quad core, that should be more than enough to handle the demands of CC. It worked well for four months, then obviously he is capable of doing the job.

  $400 CC later, always crashed when using certain actions.

  A test, I tried running the same files with the same actions on the computer of my husband, who is a more recent year. CC, crashed on his as well when the acts have been run. After much head banging, tears and communication with Adobe, it was determined that it is not uncommon for older stock may not be compatible with versions of photoshop. So, I spent weeks reworking my entire workflow to redo/remove what I had learned to count on.

  Fast forward to today. I fixed everything I know how to fix, but I still have to be VERY careful not to push too hard CC. I used to be able to work on 6 pictures at a time, with 10-15 layers on each photo. CC NEVER crashed on me. Now, I can barely work out 2 or 3 photos and it will crash if I do not pay attention on the execution of an action at a time (instead of batch processing) and that I should keep my layers to a minimum. During the time I was trying to understand the problems of my computer, I started to pay more attention to my use of the memory while CC has been opened. Before all the changes, I would use 5-6, 000, 000 k memory with only 2 or 3 pictures open. AFTER all the patches, I continue to use a crazy amount of memory.

  Things to consider before you offer suggestions:

  * Yes, I have re-installed CC about 5 times after my computer updates, mostly because I couldn't get my actions to be completed. So I don't think that a reinstall will help.

  * I tried to remove most of my actions of CC, and it made no difference in the use of memory. In addition, when I did the test on my husband's computer, the only installed actions were rare I tried to test.

  * I have disabled the automatic backup and recovery function. Still no difference.

  So, the bottom line, my question is if it is normal to use so much memory when you perform these simple tasks? Most of my layers are levels, curves, filling and a layer of sharpening and filter noise. It does not appear those who would be considered intensive task. Not only that, but also when I did the test on my husband's computer, I checked its memory usage, and it didn't even break 2 000 000 k at the same time I was with 5-6, 000, 000 k for the same task. And he has only 12G of RAM. If SOMETHING is wrong! Is there a setting I need to change so that CC is not intensive Yes memory? I could see if I was doing something 3D graphics, but these are the simple photo changes I've done for years with no problems.

  Hope someone has some / suggestions on how I can get the use of the memory down so I can run CC as it is supposed to be - fast and efficient!

  Thanks in advance for any help!

  I also have a PC equipped with ATI (and that works fine), I compared your settings to mine and thought it was quite similar.

  I have noticed differences:

  • You have an AMD processor, while mine is Intel.  Is no problem in itself.
  • You have less RAM I'm, once again no problem 16 GB is fine for Photoshop.
  • Your use of Photoshop RAM limit is smaller than mine, it is something that you could experiment with changing.  On a 16 GB system I suggest move it up to at least 80% (and don't forget to close and reopen Photoshop after changing).
  • You have a monitor while I have three.  Yours is the most common configuration, no problem.
  • You use an ATI video card slightly different that I do, but you have the same version of the installed driver - catalyst 14.4, which is generally known to be good with Photoshop.
  • You have any records of work parameters, but you have more than enough free space (more than I do actually).
  • You have a slightly older versions of several common libraries Microsoft Visual Studio, that is because I have a newer version of Windows.  Once again, no problem.
  • You have Camera Raw 8.4.1 while I have 8.5.  It is because of very recent updates.  I doubt that is why you have a problem, but you can update.
  • You have a console installed plugin Imagenomic, as well as a plugin called portrait.  You can try to temporarily remove these plug-ins to see if the operation of Photoshop is stabilized.  In addition, you should check to see if they have released updates, which you can download.

  Finally, after all is said and done, I see that you are in Photoshop 14.2.1...  You CAN try to download and install the just released Photoshop (2014) through the creative cloud application.

  Since it is a whole new separate program from the one you already have installed, it would give you the opportunity to try Photoshop with the own default settings and not plug-ins, while you'll still have all your settings in the old version.  So, if you find it works very well, you can migrate your presets of your old 14.2.1 version.  At some point, you will probably want to run the new version anyway, for that implemented new features implemented by Adobe.

  -Christmas

• Computer running very slow for macOS

  Since I've upgraded to Mac OS this morning, my computer barely works.  I frequently get beach balls, and even simple tasks take minutes where they used to take seconds.

  It's an iMac of 2011 with 4 GB of memory.

  Difficulty installing Sierra

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.

  If the above does not help enough:

  Ways to help make a slow Mac faster

  1. 17 reasons why your Mac runs slower than expected
  2. Slow performance of Mac? This Article addresses!
  3. Difficulty of slow start in OS X | MacFixIt - CNET Reviews
  4. How to fix the slow down time and start. | MacTip.net
  5. 6 easy tips to speed up OS X Yosemite on your Mac.
  6. OS X El Capitan - if your Mac runs slowly
  7. Visit The FAQ XLab and read the FAQS on performance

  Avoid using any third-party cleaning software. Usually, this software does more harm than good. You don't need it. All computers become slower over time even in normal conditions of use. Experienced users erasing the hard drive and do a clean install from scratch, from time to time; or every time that the installation of a major update of the OS. Do means if you must maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Delete unnecessary anti-malware software and any software that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan activity. Also, visit The FAQ XLab and read the FAQ on the treatment with The Spinning Beach Ball of Death.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• How to downgrade an app?

  So, I HATE the new version of Youtube because it ruined everything. Now the app barely works and crashes a lot. In addition, when it works, the layout of comments is really boring. I want the YouTube old return. Someone please tell me how did not return to the old YouTube please no viruses if I have to download something to do

  Given that Youtube is not an Apple application, did you check with them to see if it's possible or even available? Usually, if an application is updated, disappears from the old version - the only possibility is that if you had a full backup you did before you update the software.

• Bug touchscreen Circuit?

  My 6 (128 GB) iphone screen was broken, so I asked Apple to fix it... Apple support (Genius Bar) has replaced the screen...

  Until this correction of the screen, everything worked... After that Apple has replaced the screen touch screen barely works... (horrible)... After diagnostic tests (2 times), Apple says that my phone internal circuits are defective... So according to apple, the defects in the circuits are apparent after apple replaced the screen... When Apple replaced my screen, the only problem was the broken screen... Now they they circuits have a problem I need a replacement... When I had my original phone, I had no problem touch screen, everything has worked well...

  So according to my local apple (apple store) service there is a terrible circuits bug that appears when you replace your screen... This bug can only appear when you replace the screen...

  You know a way to fix this without charging me a new phone?

  < personal information under the direction of the host >

  Hello

  You will need continue to grow your service with Apple case.

  You don't talk to Apple here - it is a community based on the user - and nobody here can tell you what Apple decides.

  Contact - Support official Apple

  https://Twitter.com/applesupport

  http://www.Apple.com/retail/Geniusbar/

• Use sync to get my profile (without key - without reset my sync account)

  I have recently installed Firefox Sync, or so I thought. I went through and finished what I thought was my stored profile. I didn't know that I was given a recovery key. But apparently I was. At the end of the day I backed up, and when I go to the online part of the synchronization, it shows that I have stored information. I'm kind of a loop here.

  Because for one I can't seem to manage my account option it said to try if you have lost the recovery key, because it won't let me sync. So basically I'm confused as to how I should get my information in my profile.

  To make this clearer.

  Steps that my work.
  1. the firefox sync Installer
  2 wipe the computer and reinstall firefox
  3 try to sign firefox Sync - good
  4 try synchronization (no key) - bad

  Also if there is anyway to generate a new key without wiping all my information on sync I would greatly appreciated it was years and years of Favorites/add-ons, etc.

  I'm really desperate enough, right now, my computer barely works and now I can not even the bare minimum at work. =(

  Sorry, without the original key to the recovery of your data synchronization are unnecessary. That 'key' is the encryption key, without your key figures cannot be decrypted.

  You have another device using this account for synchronization?

• Old iPhoto migration

  I have some old white MacBook 2007 with the latest os x Lion and iPhoto on it. Problem is that the system is super slow and iPhoto barely works. I want to go back to older iPhoto and Leopard/Snow Leopard. Is it possible to do? Can I just move specific folders to the iphoto library in old iPhoto library folder and it will work? Does anyone know what file determines the version of the iPhoto library? Thanks for the tips.

  It is not possible to 'return migration' - you can go back to restore a backup system full when you want to return to-this will give you exactly what you had when you made the backup - all changes made to all data from the backup must be stored separately and subsequently applied to the system

  LN

• Problems with 24. Cannot know what version I had before the 24th. Where can I find it?

  Should not be whiney, but 2 - 3 times a year, these updates of FF make everything go haywire. I don't have the patience to go through all the questions and find solutions for them right now. I want to just go back to a working version, the version I had immediately before the 24th. But I don't know what version that was. I deleted the FF and installed 3.6.28, but it has even more questions. Is there a place to find the versions that I used, or if someone has similar problems and knows what previous version worked perfectly, can you please let me know who it was? Yes, I am still running XP, and yes I know I should update. I'm getting a new computer for Christmas and will not need to "Fix" things, so just I want to continue with what I got for the last 2 months.

  Questions that I speak to you, it's my bookmarks bar barely works. My email link does not work, I lost the icons for half of my favorites...

  Please, what was the last good version?

  Thank you

  Please upgrade to Firefox 24 (using earlier versions let you at a high risk of attack) and then tell us exactly what does not work with your bookmarks bar.

• Satellite A100 heating and fan problem

  Hello

  I will try to describe my problem in detail because I so hope that it might help!

  I have a 5 years A100-011, Nvidia 7600 Go satellite. Recently, I fixed a display problem that I used to, however, this time (two weeks ago) him comes from the computer laptop back from the workshop with this heating problem. Which is the first time! The problem is the fan.

  When I start the PC, the fan works like it ti be long, maximum for 3-4 seconds. After that the fan barely works! According to me, the air coming out but very very low! less than how it is used for years! I came back to the same place, I corrected the PC. They checked and claim his fine and work! So, I give it a shot and tried the PC.

  Unconsciously, there is problem. Because the temperature of the GPU that has the problem, idling about reaching 60 c (SpeedFan) and goes high (65-67) while surfing the net! And using this way too much for internet!

  What makes it even worst fan always at the same speed very slow! The speed can increase little when he reached 67c!

  In this way, I can not use any high performance program, because the PC becomes more heated then stop.

  Note: I tried the following:
  1-BIOS (latest version) no available fan control
  2 power settings does nothing and there is no option of cooling method
  3 - fan control software. Unfortunately, nothing has worked

  I don't really know what the problem is! Given that the fan works but not all the time and why the GPU gets hot without doing something really serious! What is a cleaning problem? If so, why the fan does not reach its maximum speed at this temperature. !

  I hope I am fine help and answer here!
  PLS help!
  Thank you

  I agree with the user Notepad Akuma is 5 years old and I think that there is a lot of dust and debris inside the cooling modules that prevent fans from running correctly.
  Air can circulate properly and therefore the temperature rises
  So what to do?

  You can use a jet of compressed air to remove dust from the fans that I'm doing this regularly and it helps to clean the fans

• Is satellite C855D - 13L - possible to upgrade the processor

  Hello

  I created this topic to see if it is possible to update or change the processor in my laptop... I can barely work with programs that I owe to the University...

  Next to the processor, which is a * AMD APU E1 - 1200 with graphics Radeon (TM) HD (2 CPUs), _ ~ 1.4GHz_*... I remember * RAM: 6 GB * and good video card: * AMD Radeon HD 7310 (3 GB) *.

  Thanks in advance,
  Cosmin

  Hi Cosmin

  The whole upgrade CPU is a little difficult.
  Let the facts:
  -Is this laptop manufacturers don t s support all updated CPU and don t advice these updates.
  -The fact is that laptops using special versions of BIOS modified for each series laptop and therefore different processors might be problematic due to the compatibility of the BIOS. In the worst case, your laptop would not start after upgrading CPU.
  -The fact is that your laptop supports the chipset AMD Hudson A68M and ONLY AMD processors would be supported by the chipset.
  -The fact is that laptop procedure disassembly is not very easy and there is a high risk of damage of the part while dismantling the unit.
  -The fact is that you will NOT see large performance gain after upgrading the CPU. I recommend you replace the HARD drive with an SSD for performance gain.

  Here are some facts that you should consider before considering the replacement of the CPU.