Sansa Clip barely working

Similar Questions

• Sansa Clip and Slacker Radio?

  Does anyone know if the Sansa Clip will work with Slacker Radio?

  Any info is appreciated!

  As Slacker internet radio, and the Clip (or indeed any Sansa player) is not, I don't see how.

• Sansa Clip + does not start or is not recognized by my computer.

  I listened for the Sansa Clip + to work for about two hours after charging the battery. It stops all of a sudden. It will not turn on, nor is it recognized by my computer. I tried a soft reset by holding the power button and I still get nothing. I tried to connect to different computers and different USB ports on each computer. I can also load with another cord which is not read.

  Any help would be appreciated, thanks

  Have you tried holding down the power button (some say 30 seconds, but I don't think he'd be as long) and then releasing and clicking it normally? This is what worked for me both times as my Clip + died spontaneously.

• My Sansa Clip does not work

  I use my Sansa Clip when I work at the YMCA. I used it last night and it worked fine then. This morning when I went to the O, it didn't work at all. Once I got home, I plugged into my computer. It still does not work. Why it does not work and I can fix it?

  How about a magic Sansa?

  Slide the switch to position IT and hold it there for 10-15 seconds.  If you have sensitive headphones, you can hear a "click" soft as the device resets.  It is the function of soft reset .  Your Clip should restart normally after the reset.  Try to turn it on as usual.

  µsansa

• Work of the trouble on Sansa Clip Zip

  Hi - I have problems with the work on my Sansa Clip Zip.  Work does not show for each song.  For songs ripped in the Zune software will show the work.  However, for the ripped songs in iTunes does not show the work.  I tried to put .jpg files in the folders with the songs, make sure they are of size less than 100 KB and even tried to resize one at 200 x 200 pixels (though the size was too large of pizels overall size was fine).  Any ideas?  Thank you.

  Use 'album art.jpg' (without the quotes and with space, not a line of underscore) or "folder.jpg" (again, without the quotes).

  I'm not 100% sure, but I think .m4a files Apple 'protected '. The Zip will not play them. They would need to be converted to a type of file supported as .aac (Apple DRM-free format) or .mp3 (universal format).

  You can use MP3Tag above (free to download) software to incorporate images of cover art in the "extended" part tag. Note that you need to do this for each (long) file rather than the image one (album art.jpg) for all files in the folder even the opposite effect.

• Sansa Clip + got wet, only volume buttons do not work, the volume on a PC?

  Hi my Sansa Clip + has been for some time on the rain and I guess that wet - volume keys do not work, all other functions OK

  TI now on "too lo wvolume" I solved it before that.

  1. is it possible to adjust my volume (now its too low after reset) on a PC connected via USB? Kind of hack volume...

  2. it should not happen, but I try send a guarantee? Maybe the wet sensors are OK cause it was just a rain...

  Any other probability/cost to fix in any fix Center "e"?

  Thank you!

  First of all, NEVER try to turn on or turn on an electronic device while it is still wet!

  You will very probably short something internally that will kill him forever!

  1 n °

  2. the warranty is for MFG. any defect of manufacture or material only! It does not include misuse of customer, as leaving in the rain, take it into the shower with you, a fall in the toilet, he swims, wear or leave it in your pocket and then do your laundry.

  2. SanDisk has not not any Center electronic "fix."

  The only thing you can do is to place the device in a bag of uncooked rice dry several days absorb moisture inside.  Since you've already played with wet it is doubtful that this will help, but it won't hurt to try.

• Work doean can't Sansa Clip after crash

  Hi guys!

  My Sansa clip 2 GB drive has dropped by 30 cm (12 in.) and now it only works when connected to the computer.

  You have any ideas how to fix it?

  Thank you!

  Looks like probably tore the battery cable loose. This seems to be a common problem with the Clip. I hope is not as vulnerable to this problem than the clip Rev1 rev2 Clip. If your clip is set to connect in MTP mode, then on your pc you can check tharge on the battery. This could help you confilm it's battery cable that fell off. If you have your receipt when you bought it, and it's less than a year, you could RMA return to Sandisk for repair under warranty. Otherwise, you could open yourself and solder the wire on. Depending on where you are, it might cost $30 or more for an electronics store to fix it. In this case, either it is logical to set, or buy a new player.

• How can I me floor device works with my sansa clip zip 4 GB mp3 player?

  Device stage seems to be a nice software to sync music from computer to my new mp3 player, but it doesn't seem to be in my new Windows 7 software? What should I download it?

  Or what I need to download (also) on the Sansa Clip Zip?

  Help please..!

  Thank you

  / Leif

  Read here.

  See you soon,.

  Jerry

• When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start

  Original title: Code 10

  When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start.  I have XP.  The MP3 came with a 2.0 USB.  I don't know what the USB on my computer.

  Hello

  First of all, thanks a lot for taking the time to help me.

  After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.

  Thought I would pass it for any future reference.

  The SanDisk site said to try this:

  Activation or forcing MSC mode on the Sansa player

  How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?
   

  The steps below will force your readers Sansa Connect mode MSC on your PC.

  Sansa Clip Zip
  1. turn off the device.
  2 hold down the central button while connecting the device to the computer.

  Thanks again.

• Power outage Sansa Clip

  Hello

  I have a 2 GB Sansa Clip I bought about 4-5 years ago and have been very happy with it.

  He runs the version of the 01.01.30A software.

  However, recently and for no apparent reason suffering from power cuts.

  It would just turn off, no matter how much battery there left, how long it has been running or what he does. And when we turn on (which is sometimes hard to do) he can't remember the last thing he was playing.

  After further tests it seems to turn off when put under different angles, almost as if there is a piece on the inside that is open/close the connection. When shaking a slight ratteling inside there, but I can't be certain that's not making noise power switch.

  Of course, this looks like a hardware problem.

  So, how can I open it and fix it? Is there a diagram somewhere I can look at?

  Thank you

  Max

  Well, I opened it and looked around in there.

  True, the battery had detached from its adhesive strips and pulled the loose battery negative cable.

  Gently, I took out the battery and was able to resolder the wire and test that it works before you all shut up.

  My double-sided adhesive foam Strip seemed to be too thick, so I used a drop of silicone glue to prevent the battery from moving around.

  All together again once, case snapped back and forth between them well.

  A little notation around the seam is a small price to pay for a media player that fully operational once again.

  Thanks for all your suggestions!

• Can not record songs on a Sansa Clip +.

  I recently bought the Sansa Clip + and it has firmware version V01.01.05F and the song rate feature doesn't seem to work. I choose 1-5 stars and select the choice, but the note is not saved. Another poster asked a similar question and its solution involved affecting USB MTP mode, but this has not worked for me. Any suggestions?

  Thank you

  OK I thought about it, the new firmware fixed this problem for me.

• Sansa clip + does not see the audio books I have loaded

  I got my Sansa Clip MP3 player + for two years and it works very well, so far.  I only use it for audio books.  Recently, I reformatted the player and loaded new books in.  When I went to read, the audio books folder was empty.  I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.

  I've updated the firmware to the V01.02.16A Version, and there was no change.  I tried to reset by pressing the start button. No change.

  Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the.  What is going on?

  That's all!  I checked the format of audio files.  It is the AAFC, with suffix .m4a.

  The Sansa manual says:

  "The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats.  I guess that AAC is not one of the formats that they support.  So I have to convert .m4a to .mp3.  I guess there are a lot of tools to do it.  Any suggestions about which one is the best?

  Thanks a lot for this revelation.

• Organize the Audiobook on Sansa Clip +.

  I'm relatively new to the Sansa Clip. I want to put an audio book on which has a set of 11 disks. I created a title on the drive under audio books. Now I want the title create 11, disk1, disk2, etc. subfolders, to copy the torn in each folder of s to do 11 playlists under the title. That doesn't seem to work. Is this not possible.

  Then I thought about being smart and merged all tore up the files from one disk to do a big mp3 fle (60 + MB) and do this 11 times and copy them under the title and create a playlist. The player doesn't and hung. What gives? Any help wil be appreciated.

  Well, this is what I discovered. Each record indicates that a separate under audio books book. So I changed the label of the album of each disc to the Heading1, Title2 etc and it works. Thank you all for your help. Very much appreciated.

• Play OGG tracks, freezes my Sansa Clip Zip

  Hello

  I tried that twice add files ogg to my card 32 Gb microSDHC SanDisk Ultra that I use with my Sansa Clip Zip, and the two times my player froze when he tried to play.

  I simply copy/paste ogg files, so I did not use any software to manage the upload. When I download mp3, I usually use the Winamp player.

  Ogg files are soundtrack of games shipped with my purchase on www.gog.com.

  I do something wrong when I download ogg files? Music plays without problem in VLC media player.

  Thank you.

  The Ogg decoder in the sandisk firmware is pretty buggy and really inefficient power. I talked to them years sending a few corrections (they use the standard decoder open source, just a version older and without much optimization), but who worked all the time, they stopped really about adding new things never happened. If you use multiple Ogg files, you should probably watch using Rockbox. I think the battery life is 2 or 3 times longer due to optimizations, and compatibility is much better.

• New Sansa Clip + not showing the track titles

  I recently got a new Sansa Clip + as a Christmas gift to replace my old (his helmet came out). I've updated to the latest firmware (even my old 01.02.18A,), and I copied my entire library of music from the old to the new player. Everything plays and works in the same way, except for one thing: on the new drive, the song titles never see the place, and the name of the file is always displayed during playback of a song. My old player would show the title of the song of the metadata instead of the file name during playback if it was available. I checked that the titles are actually there and were not lost through some freak mishap copy, so I'm puzzled as to why it won't work as my old drive.

  Anyone know of the issue and how to fix it?

  Well, Yes, that is my point of view. All tags are there, and all the rest (album, artist, etc.) is displayed in the main screen of the reading and the news section of track except for the title (who, oddly, has never had a track in any case information entry, but that is not the issue).

  ... well that, as strange as it may seem, the titles of the tracks seem to have returned - after, I moved music off the device to analyze the data volume to activate the Clip + Replay Gain. Really weird, but hey, it works now! (Maybe switch to the computer did it, since I initially copied it directly between devices?)