MY HDMI computer does not recognize my TV as audio device

Similar Questions

• What should I do if my computer does not recognize that there is a device connected media player?

  I have a toshiba laptop and everytime I try to plug in my iPod to download music, Media Player does not recognize that the device is there, to that effect, I can't sync the music on my iPod.

  Hello

  Thanks for posting your question in the Microsoft Community.

  Is it recognized in Windows Explorer?

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter to check if it detects anything:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  I hope that helps!

  If you need help on this problem or any question of Windows in the future let us know.

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Computer does not recognize Toshiba external 500G HDD - HARD drive

  Sorry, I use a translator, because all the illiterate

  A year and a half used the hard drive, and now the computer does not recognize it, the TV too.
  In Device Manager, it is there, but says "initialization error".

  What should do?
  Thanks for the replies

  You have partitions software installed on the laptop you?
  I guess that the HARD disk does not appear in windows Explorer, but common partition as the partition Wizard tool might be able to recognize the HARD drive.
  You can try to format the HARD disk and to create the new NTFS partition.

  Another solution:
  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• My computer does not recognize my I - Phone 5s, why?

  My personal I-phone 5s went crazy about 3 weeks.

  • wouldn t blue tooth with my truck-telephone calls
  • connection of the cable with truck, 2 songs, radio and telephone game crashes
  • try to use SoundHound and it changes the mode on my XM radio
  • my computer does not recognize
  • yet my computer recognizes my I - Pad Air

  Did a reset - erase all content and settings;

  • There will be phone calls Bluetooth
  • yet to mess with the radio when you use SoundHound
  • computer doesn't always recognize it
  • Yet computer wife recognizes it?

  PC or Mac?
  When you say "does not recognize" what you want to do?

• The computer does not recognize my skycaddie is hung

  Synchronization of caddie program is installed, but it seems that the computer does not recognize my skycaddie is hung

  Original title: I can't get the computer to recognize my sky caddie - when I go to install a new device is not able to find it

  Hello

   
   
  1. the device is recognized in Device Manager? Is there a yellow exclamation point or question mark next to the device?
   
  2. don't SkyCaddie connects to the computer via USB? If so, is he recognized initially until the software is installed?
  3. do you receive any error messages?
  4. What is the antivirus installed on the computer program?
   
  If you connect the device via USB, I suggest you to change the USB port and check with the question.
   
   
   
  
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
   
  I suggest you provide more information about the issue so that we can better help you.
   
  I also suggest you to see the link below for more option support about the issue.
   
  http://clubsg.SkyGolf.com/content/FAQ/SkyCaddie+technical+support+questions
   
   
   
  I hope this helps.

• IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot op.

  IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?

  Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.

• My Windows Media Center XP computer does not recognize my Nikon Super Cool Scan 5000 ED

  I have a Nikon Super Coolscan 5000 ED, which I have not used for several years.  I tried to install it using the Nikon Scan software and was a failure.  Site of Nikon said that by Hamrick VueScan will also run this scanner.  My computer does not recognize the scanner and so I can not install the drivers for it.  I tried to connect this device on several different computers and with different cables.  None of these computers does not recognize the device.

  Hello

  As you mentioned that none of the computers recognize this device, you will need to contact the manufacturer and check.

  http://Imaging.Nikon.com/support/

  You can post your request here:
  http://support.nikonusa.com/app/answers/detail/A_ID/238

• Computer does not recognize LaCie external hard drive when it is connected.

  Should I just a 'driver' of the manufacturer so that windows recognize? Help, please.

  The device is a hard drive (250 gb) bought in 2006.   LaCie support has provided relevant solutions.

  I disconnected the USB line, reconnected with the power of the unit it turned on and off while only plugged, unplugged, and made all possible combinations of many times. My computer does not recognize anything.

  I can't find it in my computer, and also, the computer does not list the device in the Device Manager utility.

  I have disabled the Windows Firewall.

  The computer with which the external drive worked and one that currently does not recognize are model computers windows XP (2008).

  Thank you very much for your help.

  Thanks for the reply.

  In the meantime and after reviewing all similar positions, it turns out that find the 'live' usb device does the trick.

  So, other people with similar problems, try the usb cables at the back of the computer (all), then by restarting the connection there.

  It worked for me.

  Thanks again for the reply!

• My computer does not recognize my flash drive at all

  In the past I was able to plug my USB key and use it (make changes, and save the information), now when I insert it, nothing happens. The screen displays just the desktop.    The computer does not recognize it.  I tried another drive flash with information on this subject, once again, nothing happened.  I need help how to fix this problem.  Thank you.

  Sounds like your AutoPlay settings need to be adjusted.

  Something to try...

  Insert the flash drive into a USB port and go... Start / my computer...

  The flash player should be recognized by a drive letter...

  Right-click on the drive letter and go... Properties / AutoPlay tab...
  Left click on the button "Restore default settings" / apply / OK.

  Now... Remove and re - insert the flash drive and see if there is an improvement.

  And... the following Wizard may be worth a try:

  Microsoft AutoPlay Repair Wizard
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2648

• Computer does not recognize my Flash drive or application to be open.

  Original title: usb not recognized

  My computer does not recognize my Flash drive or application to be open. However, I cannot hear the sound produced when something is connected.

  Hello Miss beautiful,

  1. are you facing problems with USB devices?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

• Computer does not recognize the Olympus Stylus 820 digital camera and shows no photos

  In December 2010, I had a virus that Microsoft was able to destroy, case #866RJP and now my computer does not recognize my digital camera.  Is there a link between the virus and do not recognize a camera?  Why my computer does not recognize my camera?

  GO to the ms Update site and run custom updates, can help.

• Cannot add any material and my computer does not recognize one of the ports

  my computer won't recognize any port or plug and play devices. map of my camera not recognized when I insert in the port.my computer does not recognize one of the ports and if I try to download a driver for the printer, it starts and stops before installation. The computer had crashed and went blank. So I had to get a new hp boot disc and install it. Since then, it has happedned

  Hi gramward1,

  We recommend all first download and install the drivers for the chipset on the computer and check the difference.
  To download the driver, visit the website of the manufacturer of the system.

  Step 1: You can also try to search for the hardware changes and check if the device is detected on the computer. To do this, try the following steps:
  a. connect any USB device to the computer.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of items, click one of the items, click the Action menu and click scan for hardware changes.
  d. check if the device is detected.

  Step 2: Try to remove and reinstall all USB controllers
  a. Click Start, click Run, type devmgmt.msc in the Open box and then click OK.
  b. in the list of components, expand Bus USB controllers.
  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  d. restart the computer once you have removed all the USB controllers.
  Note: USB controllers automatically install after you restart the computer.
  e. plug the removable USB storage device and perform a test to ensure that the problem is solved.

  If the problem persists, run Microsoft he difficulty of this article: http://support.microsoft.com/kb/925196

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer does not recognize sansa fuze

  I have my fuse sansa for over a year and no problems, but now I'm trying to plug it in (to add songs), but it shuts down and the computer does not recognize it. I formatted, but still once, nothing happened.

  What is going on?

  I am sure that is not the computer because it recognizes the other gadgets and souvenirs, memories, external drives, etc.

  Help, please! I'need to still have a few records in my rocket!

  Thank you.

  Have you tried another cable?

• Computer does not recognize my Sansa e260

  I run Windows 7 Home Premium. My MP3 player is a Sandisk Sansa e260.

  Normally, to charge the Sansa, I've just plug it into a USB port on the computer. It is immediately recognized and loading begins.

  Today, while I was out walking the dog, the Sansa ran out of juice. So when I got home I plugged the computer in the usual way. The computer does not know that it existed. It didn't start to load, it does not appear as a drive in Windows Explorer.

  I rebooted the computer with the trendy Sansa. No improvement. I ran "Find the hardware changes" on the USB entry in Device Manager. No change.

  I tried the Sansa in computer from Vista to my wife (who also accused there from time to time). Same result - the computer does not recognize the Sansa.

  Any ideas, please?

  Try performing a reset before you plug it into your computer to charge. There may be just enough juice left for this. You can usually squeeze a few more drops of a flat (any type) battery by heating slightly he. Maybe put it in your Pocket next to your body under a sweater for a while, or take it to bed with you. Your body heat to warm up gently.

  Now that old hat so to speak, press and hold the market/menu button while you count to 20. You can do it silently so the people around you do not think you have freaked out. OK, now, release the button and after a few seconds, press again to see if it boots up on its own. If so, place the cable of life support (Sansa) to quick before he dies again.