HP DESKJET 4645: HPdeskjet 4645 paper jam error does not disappear after a clear path completely according to the internet, ask

Similar Questions

• no lights after paper jam, printer does not

  no lights after paper jam, printer does not

  John, thank you very much, found that when the paper through the printer offline mode, I put on the line, then reconnected to electricity, and she came back.

• All-in-one Officejet 5610: computer said paper jam, printer does not respond

  We had a paper jam, which we is allowed. The printer says there is no jammed paper and printed successfully a self-test.  The table of edge devices and printers said that there is a jam paper and attempts to print just to sit in the queue.  Clicked on the HP Solution Center and it says printer is ready. The printer is okay.  Only the OS seems to have a different opinion.

  Not tried them: (1) open the back door and look for debris. (2) open the Feeder and locate debris.  (3) open front (involves opening door cartridge, unplug the printer and remove the trays) and search for debris.  (4) self test printing.  (5) restart the system.  (6) unplug the printer while and leave unplugged for 60 seconds to force the delivery.  (7) repeat steps 1-4.  No SOAP.

  Have you tried what is obvious.  Turn on the computer and the printer off both.  Now, unplug the printer from the computer.  Turn on the computer and then turn the printer back on.  Now reconnect the printer to the computer.  This assumes that the printer is connected to the computer via usb.  Alternatively, you can try to plug the usb cable into a different port.

• Update error, does not download after system upgrade

  My laptop Sony all in one was running 8.1 and started running slow, so I did a refresh in assist mode, sony has.  It did not work would not recover from the start that I did a complete system and it worked. However, now every time I try to update everything to go back to windows 8.1, im stuck at windows update is download, but it is not at all.  I did windows update troubleshooting and 3 erros jumped to the top and 2 of the three say fixed, while one said detected, but not fixed.  Why can I update, or better yet, how to find the files that I'm missing and re install? Help, please...!

  Problems found
  Search for the missing or corrupt files Check for missing or corrupted files	Detected
  Fix missing or corrupt files Completed
  Windows Update error code 0 x 80070057(2014-03-09-T-01_51_39P) Windows Update error 0 x 80070057(2014-03-09-T-01_51_39P)	Fixed
  Store data to reset Windows Update Completed
  Recent installation problems updates Problems installation of recent updates	Fixed
  Fix Windows Update Completed

  Potential problems that have been verified
  Environment of Windows Update the variables are incorrect Windows Environment variable update are incorrect	There is no question
  Some security settings are missing or changed Some security settings are missing or have been modified	There is no question
  Registration for the service is missing or damaged Service registration is missing or damaged	There is no question
  Windows Update Services are not running Windows Update Services are not running	There is no question
  Encryption services components are not registered Cryptographic service components are not registered	There is no question

  Problems found

  Detection

  
  Details

  6 Search for the missing or corrupt files Detected

  Fix missing or corrupt files Completed Output of the SFC Output: Windows resource protection did not find no integrity These violations.

  6 Windows Update error code 0 x 80070057(2014-03-09-T-01_51_39P) Fixed

  Reset Windows Update data

  
  store
  Completed

  DataStoreAndWULogFiles.zip

  18.77 MB

  Name of the file: DataStoreAndWULogFiles.zip

  6 Recent installation problems updates Fixed

  Fix Windows Update Completed Windows repair Update of services and

  
  dependencies

  Potential problems that have been verified

  Details of detection

  Windows Update environment variables are incorrect There is no question

  Some security settings are missing or have been changed There is no question

  Registration for the service is missing or Corrupt There is no question

  Windows Update services are not running There is no question

  Encryption services components is not registered There is no question

  Details of detection

  Error report

  RootCause: RC_DataStore Error code: 0 x 80070057 TimeDetected: 2014-03-09-T-01: 51:39 P

  Collected files

  Name of the file: CheckSURLog.cab

  The service status

  Problem with the BITS service: the requested service has already been has started. More help is available by typing NET HELPMSG

  
  2182.

  Collection information
  Computer name:	THEDARKNIGHT
  Version of Windows:	6.2
  Architecture:	x 64
  Time:	Sunday, March 9, 2014 01:50:24 PM

  Publisher details

  Background Intelligent Transfer Service
  Find and solve problems that can prevent work background downloads
  Package version:	1.2.1.20131113
  Publisher:	Microsoft Corporation

  Windows Update
  Find and fix problems with Windows Update
  Package version:	8.1.1.20131113
  Publisher:	Microsoft Corporation

  Twhite1288,

  I suggest you to see Help links and check if it helps.

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  http://support.Microsoft.com/kb/947821

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• The J6480 paper jam error message will not reset

  I have a sinus J6480 2009 and it's been great!  -After printing 1 doc a transport jam has occurred.  After clearing the jam in the printer cartridge holder, I turned everything back on and a paper jam error message appeared.  I did everything - check all patterns, clean the rollers, unplugged and checked the duplexer - always error message.  Is there a way to reset this?

  Can someone help me please!

  Thank you!

  Brian DB

  Hello

  Maybe a few pieces of paper is still stuck inside. Try the following two and check if any stage of work:

  http://support.HP.com/us-en/document/c01314068

  http://support.HP.com/us-en/document/c01312792

• OfficeJet Pro 6230: Officejet Pro 6230 continous (not of paper) paper jam error

  As soon as the printer powers on it the ink carrier Wizz backward real quick (as he struggles to move) and then gives me a paper jam error (the resume light flashes and error appears on my screen). He did the same thing when I try to print anything (including the status report page).

  When I up the access panel upward (power on), the carrier of ink isn't even move to ink cartridges which can be changed. I try to move with force, but it does not move (if I use more strength, somethings will break). Ink is a bit new, so I don't know it still has ink in there.

  The steps I've tried:

  plugged the power supply into the wall outlet

  roller cleaning

  THERE IS NO PAPER or PAPER PIECES BETWEEN ROLLERS (I checked like 20 times)

  reset the printer

  There is a large black gear coupled to a white average speed on the left side near the bottom of the printer. I manually drove the speed by pressing (rotation) of North (or forward or to the rear of the printer) for a few seconds and once I did that. the ink carrier was able to move as it's supposed to, and I could see the ink. but once the power is back on, the carrier of ink was in the locked position and fights again and gives me the paper jam error.

  I don't have really any troubleshooting documents on the CV online on how to fix a jammed media of ink and clearing paper jams, so I'm out of options.

  It is plugged into USB

  The main problem is the paper jam error.

  I don't know if the stuck carrier of ink is the cause.

  Hi @Comp-Tech.

  Thank you for joining the HP Forums!

  I noticed your post that your printer HP Officejet pro 6230 receives a constant paper jam error. I'm happy to help you!

  Since you did all the steps already to troubleshooting in this guide, A 'transport Jam' Error Messageand this guide, "Problem of tray or paper jam" Error Message appears, as well as the reset of the printer. The next step is to fix the printer / or replaced.

  Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Best regards!

• Paper jam error

  Hello

  Three weeks ago, I bought a HP Envy 7640 all-in-one printer.

  It worked fine until I hit a 'paper jam error.

  I worked through the step by step manual HP full address (cleaned, checked, rebooted etc.) to fix this one, but nothing helps. I'm sure that it is clean and it is / was absolutely no paper left.

  I tried the thinner paper (80 grs.) instead of 90 grs. but it does not help.

  It takes a minute or two and it still gets stuck on the "paper jam error".

  Who can help me?

  Hi @TesvanL,

  Welcome to the Forums of HP Support!

  I see that you are having paper jams on your HP ENVY 7640 e-all-in-one printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  You did a great job of troubleshooting to isolate the problem. Hand to recommend that you try the procedure described in the guide below, there is probably a hardware problem.

  • "Paper jam" error

  If the problem persists, I suggest to contact the HP support by phone.

  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet pro l7680 - paper jam error

  original title: HP Officejet pro l7680

  Guard gives me paper jam error. I removed all stuffed with material, redefinition and still not stop send MSG does anyone have any suggestions? Says the error is in the area of the print cartridge. Nothing there.

  Hello

  ·          The printer works much earlier?

  ·          What have the changes to the computer or the printer settings until the problem occurred?

  You can see the link given below to resolve the problem.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope that information was useful

• Paper jam error wrong Officejety of HP Pro 8500 has

  I canceled a print on my printer today and its giving me a paper jam that I can't get rid of feed! Ive checked all the forums without success? Please pelase y at - there some brilliant genius out there who can tell me how to solve this problem?   Thanks in advance for all irritable brilliance, you can offer!

  If you experience a paper jam error message it could be caused by a number of things such as dirty or damaged rollers.  I've included a helpful link to a document that could help you.

  Let me know if it helps.

• 4500 paper jam error

  This machine worked well for me over the years. This morning, I tried to print and received the error - paper jam: clear and press OK. I pulled the paper at the back intact. Again, the printer immediately jams now as soon as I hit OK and the paper goes into the machine. If I stop and disconnect as soon as it's on, I get the paper jam error. I inspected inside the machine from the front and the back and see paperless. I had nothing out torn. In addition, the rolls all appear clean and that there are no even dust in the machine. I did the reboot with holding the # and 3 # 6. Whenever I give my language and location, I'm back for the paper jam: clear and press OK. If no document is loaded I still get the error if it is busy it gets pulled into a time jams. Removed the back stuck pages have 3 reels as dashes on any page about 2 inches down. I read like 45 Messages other users. Is there anything else I can try or should I start shopping?

  If you get the error message of paper jam and have even done the reset, nothing helps, the only other suggestion is to remove the ink cartridges and do a hard reset (remove the power cord at the back of the printer, while it is running and then plug it ten seconds later come back in).  While the ink is out, take a flashlight and look carefully where the ink goes.  I saw jams of real transportation continues to display the error message of paper jam.

  When you turn back on the printer by plugging the power cord in back in, look at transport, make sure that it moves freely.

  It is probably a machine off the power to the next level and can be more effort it is worth to take apart and find the exact speed the cause.  I'm sorry you're having this problem, but you have certainly confirmed that you did all the classic steps to fix this.  I hope this helps you.

• I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue

  I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue

  If it still shows paper jam and you know that there is no paper, just turn it works, and it should realize that there is no paper.

• DeskJet J110 light of power is flashing. does not print. Will not the carriage to move. turn on automatically return

  I had a paper jam and allowed. It was in the middle of a print job. Now, he won't do ANYTHING, but the Start button / stop flashes. I worked through the options with no luck in case of problems. The paper has no tear at all, so there is no small piece of paper stuck in it, but that's what it is like. Tried to turn it off and wait 30 seconds, but it will not remain offshore. It turns turns! Tried out the ink cartridges and putting them back. Don't reset the transport. There is no messagages error. Help, please!

  Looks like you have a very serious carriage jam. The document following the link will have all the steps that you can do to try to solve the problem. If this does not work, you can contact HP to see if the printer is still under warranty. HP should replace it if it is. HP contact information can be found by following the link below.

  Jam transport document:
  http://goo.GL/AEpoe

  Details of HP.
  http://goo.GL/WaHYM

• Firefox does not start after the upgrade: error code 2324

  I updated Firefox on my desktop running Windows 7 Enterprise (64-bit). Installer stub downloads and works through the installation, but does not automatically start Firefox. If I click on the link in the task bar, nothing happens. Same thing with that pinned to the start menu. If I go to the Mozilla folder and load Firefox from there, I get a message saying "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324. »

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• Script error does not YouTube HTML5

  With the YouTube HTML5 (http://www.youtube.com/html5 ) mode is activated, any video that is played with the HTML5 player will give me a script error does not respond on "" Script: http://s.ytimg.com/yt/jsbin/html5player-vflGWJljH.js:58".

  Note that not all videos play on the HTML5 player. Try this video: http://www.youtube.com/watch?v=cdgQpa1pUUE

  Howard Forum Wiki gives me unresponsive script error as well. Go in http://www.howardforums.com/showwiki.php?title=Android+Wiki: on and click on the Discussion tab and I get an error of "Script: http://www.howardforums.com/clientscript/vault/reset.js?v=3014:285"script. "

  Google knows about the issue, and they should be updating the Web site later today.

• HP deskjet 3510 does not work after windows 8.1

  My printer HP Deskjet 3510 cannot be detected after windows 8.1.  My computer is a HP Pavilion g6. Now, I would never, I clicked to install, I wish they would send me just windows 7. Laughing out loud

  @klb75,.

  Thanks for posting.

  The cardinal rule of when something does not work after update to 8.1 is put it back in place. This applies to the printing software and all other software. Uninstall from the control panel configuration, programs and features. Then, restart the computer.

  After that, download and install this software: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-108718-3&cc=ca&dlc=en&lc=en&os=4158&product=5157483&sw_lang=

  * Thus, before installing the software, disable all Firewall/antivirus software. This software can create conflicts with the printer software.

  If reinstalling it does not help, run print and scan doctor. He could fix it... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=CA&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/printer_diag/&softwareitem=MP-135113-1