Kodak esp7 all in one, error paper jam and will not print

Similar Questions

• I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue

  I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue

  If it still shows paper jam and you know that there is no paper, just turn it works, and it should realize that there is no paper.

• HP Officejet J4680 series: all-in-one HP Officejet J4680 series will not print Word documents

  My HP Officejet J4680 all-in-one ink jet printer will not print in Word 2010 documents. It will print .pdf and Excel 2010 documents. I ran printing HP and doctor Scan and check it and put to date and said all is fine. Just around checking on my computer it said in the devices that the printer is ok. I printed the test from the doctor of Hp Plug and it came out ok. Seems so that Word documents are the only problem. I installed Windows 10 earlier so not totally sure that's the problem I don't remember if I used the word since installation up to now.

  I bought this printer in 2010 and have had no problems with it and I can tell you that I have printed a large NUMBER of pages.

  Any ideas how to get this printer working?

  Thank you!

  Hey @Ric88xx, welcome to the Forums of HP!

  I'd love to help you with your JO J4680. I understand that you are unable to print from Word, but you can print the PDF and Excel. Please use the following article from Microsoft to solve the problem and I would like to know the results of your efforts: How to troubleshoot printing in Word failures.

  If this resolves the issue, please click Accept as Solution button below. If the problem persists, let me know and I will do everything I can to help. Thank you.

• just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  Vista Home premium 32-bit

  Hello

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  ABon the Defender being turned OFF

  With MSE installed Windows Defender is supposed to be disabled.

  MSE has been designed with its own version of Windows Defender under its own program.

  If the two were running, it would cause system conflicts.

  See you soon.

• My trusty 2410xi has a mechanical jam and will not let me do all the work

  recently, when I turn on my trusty 2410xi all-in-One, it of a mechanical blocker and will not let me perform all tasks. I tried to disconnect the supply of the data lines, nothing helps. Looks like the print head may be stuck? I remember having the same problem a long time ago but don't remember what could be the solution to the problem.

  There are a few things that you, and not when this happens. Most of the time it's a very small piece of paper holding things to the top, or the printer just need a reset to zero more deep. The document following the link will take you through all the things you can try. If this does not work, you will need to replace the printer. Let me know what happens.

  http://goo.GL/BnGuX

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Try to download Bing Bar 7.0. Received the error code 61BO and will not download. What should I do

  Windows Update has tried to install the update of Bing Bar 7.0 since 16/01/2012.  Have tried many times update me.  Display shows error code 61BO.

  and will not be installed.  I installed Miscroft difficulty and tried again, but still get same error message.  What should I do?

  Hey chick from Mississippi,

  If you are unable to install Bing Bar 7.0 and receiver error code 61BO, create a new thread in the Community of Bing. Experts are better able to help you.

• Wireless network problem unable to connect to Kodak ESP7 All In One Printer wireless. Windows 7

  Hi close baldy headed by trying to connect a Kodak ESP7 printer all-in-one wireless. The printer itself recognizes the wireless connection which is excellent but the does'nt of the computer. Whenever I try and print something an error message printer does not. I tried resetting the wireless router, is returned at the beginning and installed the software again, but no luck. I am on Windows 7 and the other 2 laptops that I have in the end work from home. Could someone tell me if I'm missing something simple, or would it be a problem with the printer itself. Thank you
  Phil

  Hello

  Configure the primter with a static IP address to connect diretly to the router (read the printer manual).

  Then using the Kodak software, install the printer driver and utility management, on each computer that requires to for use.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• OfficeJet 4215xi all-in-one false paper jam?

  My oficejet 4215xi gives error message "paper jam".  I cleared and cleaned as well as I am able. Print cartridges won't move from the left side. Is this fixable or dead?

  I assume that everything is resolved. I got a new printer. Support HP says the Impossible error condition be corrected or repaired.

• HP Deskjet Ink Advantage 3525 e-All-in-One - persistent paper jams

  Hi I just bought a HP Deskjet Ink Advantage 3525 e-all-in-one printer. I followed the instructions in the user manual and the animations on the HP site, but my paper is blocked, whenever I try to print. Any suggestions? Thank you!

  If you are able to print without problem test pages, it may be a connection problem.

  You can try another USB cable or try to uninstall and reinstall the software and drivers and see if you get the same results.

• All-in-one Photosmart HP 3310: colors may not print correctly on A4 photo paper.

  My HP 3310 printer gave me great prints for many years, but during the last 12 months, 210 x 297 mm prints threw a desaturated look and brightness has dulled as well. My photos 10 x 15 cm print perfectly.

  I did all the recommended suggestions, cleaning of the print head, aligning the printer even restore to factory default to no effect.

  I use Spyder Pro 5 to ensure that I have the exact colors on my screen.

  I printed via the printer settings and also the settings of Photoshop.

  At the present time, all my photos contest must be overexposed and strongly saturated for previously appreciated results.

  I only use HP photo papers and real HP363 inks.

  I hope someone can put an end to my frustration.

  Welcome to the HP Forums @-g_s70

  I came across your post about the problem you are having and I wanted to respond to help with my suggestions. Please see the guide below to resolve this issue. If the problem persists after resolution of the problem, please try to call the hotline to discuss replacing the printer or the rating of. I'll include contact info HP below to directly reach.

  HP Photosmart 3100, 3200 and 3300 Series all-in-One - the printed colors are not colors should

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• 2540 cartridge error HP all-in-one office under windows 8 will not be printed

  My HP deskjet 2540 all-in-one printer will be printed not in windows 8. pls help.

  Hello

  Please see my response to your other thread:
  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/HP-DeskJet-2540-in-Windows-8-not-printing/m-p/3611251/highlight/true#M129063

  Thank you

• DeskJet 2542 all-in-one: 2542 Deskjet all in one error: "the specified module could not be found" when installing on USB

  Installation runs OK until the USB cable is connected, when the error message appears and the installation fails.

  I have correctly installed and work the printer on another XP PC of a similar age - that is to say old.

  I've updated the XP operating system to SP3 with many updates.

  Check that ports USB read only data fits OK;

  run a / v programs and malware, including Microsoft Safety Scanner;

  check that the USB drivers are up to date;

  software driver uninstalled and reinstalled with the software downloaded from HP;

  performed the procedures detailed in HP Support Forum 4022116

  The same error message.

  It's for my elderly neighbour - help please!

  The somewhat simpler answer to this problem was to do a clean install of XP SP2, accepting the necessary updates, and then install the printer software, downloaded from HP.  A lot of time but it worked, and the old PC runs a little faster!

• HP Envy 7640 e-all-in-one Seri: HP Envy 7640 does not print

  Printer locked up - line said that the printer's paper (not) and it was offline (no). I unplugged, restarted the computer and the printer. Followed all the basic troubleshooting tips and stupidly the suggestion to reset all printers. Big mistake, now zero printers happen when I try to add. The search option does not either. Is it my computer? I don't think so. This is a NEW printer - printer only a dozen or so articles. Help, please!

  Welcome to the HP community @ellumare,

  I read on your desire 7640 does not although you receive an "Out of Paper" error, the printer showed as 'offline' and currently cannot add printer on your Mac with 10.7.

  Here's what I would recommend. Try troubleshooting the equipment first, because if there is a problem with the unit, this will lead to software problems and troubleshooting cycle can get tedious.

  1. power reset the printer and make sure the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  2. try to make a copy of the front of the printer. If the work of copies successfully, go to step 3, if the copies do not work, tell me what happens when you try to make them as there is most likely a hardware problem.

  3. from your Mac:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click on this link to download and install the full features and software driver: HP ENVY 7640 e-all-in-One Printer series full feature software and drivers
  5. Print from text editing and other test applications and also try to scan from HP Scan/HP Utility.

  I hope this helps, and I hope to hear the result!

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

• Paper jam condition will not clear

  I had a paper jam then the impression that required me to remove the back panel to clean.  The status of paper jam continues even if I deleted it.  I checked in the ink cartridge door and back panel and there is no jam.  How can I fix this problem?  I also tried the printer off, unplug and restart without success.

  I contacted HP and they replace the printer.  Thanks for all the suggestions.