my HP PC under XP Home Edition will not read my SDHC 4 GB card

Similar Questions

• My pc will not read a SDHC 8 GB

  original title: my pc will not read a SDHC 8 GB card, what should I do? __

  Covers the note above, I have Windows Vista, dual processor Gateway!

  Wednesday, July 14, 2010, 10:22:56 + 0000, dipstickzzzz wrote:

  The foregoing is the fundamental question.  Card has 8 GB of storage from my camcorder/camera.  My card of 1 GB SD camera wifes bed very well.

  Card reader is obviously for standard SD cards (up to 4 GB). He
  will not read SDHC cards.

  Buy a stand-alone SDHC reader somewhere like Amazon.com. They are very
  inexpensive.

  Ken Blake

• Tecra M1 will not read any type of SD card

  Help!
  According to the title, my M1 will not read any type of SD card. I'm running the SP2 of XP reloaded from original floppies, and it is fully up-to-date with Windows Update.
  The little green light adjacent to the slot flashes briefly on the insertion of a card, but nothing happening for example no open option window and nothing visible in my computer.

  I downloaded the latest drivers and installed according to the directives of the readme.txt file and even thought to copy the SDDEVMGR.dll in the System32 folder.
  I obviously lack something, so any help or pointers are welcome.

  Thank you very much. Craig

  Hello

  Usually, books are not all sizes of SD card and so you should be sure that the used SD card is supported and compatible with the Tecra M1 card reader.

  But if you are using a compatible SD card the laptop should be able to read/write on the SD card.
  I try to remove the SD card in the Device Manager controller and remove the driver software malfunction. Restart the computer and install the latest drivers again.

  PS: A registry cleaning would be desirable. CCleaner is a great registry cleaning applications

• Satellite A200 PSAE3: Windows XP Home edition do not recognize the modem and sound card

  Hi all!

  I can't understand what is the problem with my Satellite A200 (PSAE3)... I downloaded all the files on the right of the Toshiba Download Center, updated the BIOS to WXP but XP still not find any sound card or any modem. He isn't finding a device with a "?" question mark on this...

  There are so many different drives, I tried, but no one has changed the situation...
  Anyone has any advice?

  Thanks in advance,

  ciroopi

  Well, I found the solution to the problem! :)

  so, I write these verses down for anyone who might know the same problems:

  as usual, strictly follow the 'Toshiba A200 Installation sequence' found on the TOshiba driver download page.
  as he [I jumped no useful installation programs]

  I advice restart you each time you install a component, in order to have under control the whole Exchange.

  1 Windows XP Service Pack2 (RTM) - of course ;) -.
  [...]
  DirectX V9.0c 5 (SP2)
  Windows Media Player 10 V10.00.00.4036 6
  [...]
  10 Microsoft .NET Framework V1.1.4322 (SR1)
  11 Sun Java 2 Runtime Environment V1.6.0
  12 Intel ICH8M Chipset utility V8.2.0.1014
  13 Intel VGA driver 6.14.10.4833 965GM

  Note that driver VGA, the ATI we too, was also a difficulty - in fact, I don't know what it would have done - for the AUDIO sound card.
  You may have read in the installation dialog box.

  Moreover, I do not know if you must install the sun java, .NET framework and WMP version that displays the list, versions that are OLDER than the most recent, but just to be sure, download the form versions THAT NET.

  at this point, you should see "unknown PCI device" in the unknown devices in the system control panel.

  14 Realtek ALC268 Audio Driver V5.10.0.5433

  for realtek, I suggest you download the driver from the zip from the realtek download page; Once extracted from the latest version for desktop or a temp directory, I suggest to install before all the patch KB888111 you might find in the \WDM_Rxxx\MSHDQFE.

  then restart.

  for now, you should not see the "unknown PCI device" no more where it was before, but under the "system devices", like her, where you could also end the "Intel PCI Express Root Port", "Pci Bus" and so on [ja? m saying this to you because ja? m Italian aid of XP, and I don't remember the exact English names...].

  Now, install the audio drivers by using the setup.exe that you find in the \WDM_Rxxx directory.
  It should reinstall the kbfix and install the new drivers.

  Reset.

  After the reboot, nothing happens, but...

  .. see the "unknown pci device" menu - here? m not sure the name but the one with the exclamation mark in the 'system devices' - select 'Properties' and then 'driver' and 'update driver'. Let XP find the NOT on the net. tell XP to look for "Video and Audio Controller, game" [you know, the English entry that usually stands for device audio and similar] and he must find a CORRESPONDING driver, which is the "MICROSOFT UAA BUS DRIVER for HIGH DEFINITION AUDIO".
  If XP don't select this driver by itself, you should look for "\windows\system32\DRIVERS\hdaudbus.sys".

  After that, XP automatically detects ALL audio devices and install the correct drivers.
  In addition, it now the entrance to the modem, modem to install the separate driver, that we could find in down in the "list system", like her, on the Toshiba download page.

  So, hope this helps!

  See you soon,.

  Francesco

• Vista Home Premium will not read/recognize/burn HD videos taken with my Canon camcorder HDD21/AVCHD (MTS format). Results in the message stating "Windows Media Player may not supported file type or the codec that the file compressed.

  I have a Vista Home Premium 64-bit, Service Pack 2 Dell.  He read/won't recognise no videos HD taken with my Canon camcorder HDD21/AVCHD (MTS format).  Each attempt generates a message stating "Windows Media Player may not support the file type or the codec that the file compressed.  I used a Windows 7 PC, which allowed me to play the video from the camcorder and burn a DVD of the video to share with the family.  I'd appreciate any help.  Thank you

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992

  For better support please try the Microsoft Vista for photos and video forum instead. http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

• external usb card reader will not read anything beyond 2 GB cards

  my computer is running Vista Edition home premium 64-bit.  When I plug my digital concept 51-in-1 play/recorder card the computer will recognize, if I put in my mic of 1 or 2 GB sd he sees.  But if I insert anything bigger that that the computer sees the card, it does nothing.  So I don't know the card reader works.  I have another computer running the same OS but 32 bits and I have no problem at all.  Could there be a problem with the 64 bit?  Please help... very irritating!

  What is the EXACT make and model of drive?  It is Digital Concepts CR - 75 USB 51-in-1 Card Reader/Writer (if not, why)? So no matter where you had drivers, firmware or software for this devicce or did you just plug it and expect it to work with anything else required (which may indeed be the case, but I suspect not - I just want to know if you have anything to make it more compatible with the system).  Where did you get these files and where is the technical support (web site help - is it Sakar, http://www.sakar.com/contactus.aspx?)  If so, consult the following site:http://www.bestpriceaudiovideo.com/digital-concepts-cr-75-usb-51-in-1-card-reader-writer/.  You'll notice that it includes Vista as OS compatible.  Yes, I know, is to find work on the other Vista machine and it works even partially on this one - but he may still have some problems. "

  I would contact Sakar support http://www.sakar.com/contactus.aspx and discss the issue with them.  They have a simple solution, or they can tell you that you need to install some additional things (and I hope that tell you where to get them) or they can say that there is a problem with Vista 64-bit.  In any case, they know better than we do, and since you are 'install' as plug-and-play, then the issue is not Vista but the device and/or drivers, firmware, or software required for the unit (even if this wan't necessary in Vista 32-bit computer) of the product.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• XP pro will not read my scandisk 4 GB card

  is one patch or fix for this?

  If you use a card reader, only it supports SDHC? If this card is SDHC? If so, this could help. But it may have been included in SP3. If it is installed. If this fix doesn't fix it, you will need to purchase a SDHC card reader

• Driver Ethernet for Windows XP Home edition does not work on Satellite A100

  Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

  As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

  Hello

  I can't believe that you are not able to install the LAN on this Satellite A100 driver!

  However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

  If you want you can download and install page Intel network driver:

  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

  You will find the drivers Intel 8256 x Ethernet controllers

  Good bye

• Adobe Digital Editions will not activate with too many activation error

  Adobe Digital Editions will not be activated with too many activation error.  Technical support refused to help.  What can I do?

  To reset the client contact activation support cat https://helpx.adobe.com/contact.html?step=ADE_adobe-id-signing-in_stillNeedHelp and ask for the reset of the adobe ID.

• Means of hard drive failure cannot use the recovery partition. Alas! recovery discs will not read!

  Hard drive decided to throw a wobbly and abandon me. I can't access the drive at all so decided to but a new and use the recovery at least discs bring the machine to its status as an out-of-box.

  That's the problem... It will not read the recovery disc. I know there is some stuff about it because I read in another machine. Until you tell me to change the DVD hardware... it reads very well all the other disks. I loaded Arcronis, as well as other system repair stuff, using the DVD Player/Recorder.

  I have a pukka Product Code for the software, Vista Home Basic. Can I get a Vista Home Basic disc and then use my key to sting?  I'm happy to pay a price, but do not want to buy at the price high. After all, I already paid for it once!

  Any help/suggestions will be much appreciated.

  Mr. Blue Screen.

  Hello

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Satellite P200D - will not read the Memory Stick Pro duo adapter

  Kia Ora
  My Satellite P200 will not read my Memory Stick Pro Duo adapter, both brand Sony.

  I am running Vista Home Premium. SD cards are read OK.
  The adapter works fine in my PC running XP Home premium. I tried two cards different pro duo. Help, please!

  Hello

  I think you should consult your user manual because this type of card is not supported:
  + Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. Do not insert the Memory Stick Duo/PRO Duo into the slot. Data lost or damaged if you use one card other than those supported. +

  Do you have more questions? ;)

• elements of Adobe photoshop 11 will not read my canon T5 raw CR2 files.

  elements of Adobe photoshop 11 will not read my canon T5 raw CR2 files.

  Why?

  need help!

  Hi Zach.

  Sorry to say but 12 items came out a few months before your camera. Adobe stops the files updated camera raw for the older editions of software in order to get people to buy new versions of software when they get a new camera. It happened to me with LR3 when I got a new camera.

  Work towers there but they are a lot of steps, and I think you would be the conversion of files to one format other than RAW (tiff?) and that I'm not sure that will happen the same.

  I think you just need to get a newer items.

• My E drive will not read the DVD-RW/DVD-ROM

  So here is the problem
  I have a vista Home premium 32-bit with sp1 computer laptop
  who will not read DVDs or games that are in DVD-ROM format (specifically, the game command andConquer 3: Tiberium Wars)
  but it will read the games more alumni who are PC - CD (such as Command and Conquer: Generals) well it will nt installs successfully

  I tried to clean my computer and reinstall using operaing system came with my laptop drive, but the drive E may not even read that
  the CD turns, stops, turns, makes a strong ' loading ', but stops then
  nothing happenes
  I restart my PC with the CD in there because he says I'm supposed to o, but nothing happens, my restartes just PC normally

  Help, please

  Hello, tyINtrouble

  The device is listed as a DVD player?

  You can check by clicking on start, click computer, and to check the label of the hard drive, he may mention DVD or DVD - RW etc.

  You can also check your connections are secure.

  If possible, you can try to test the drive in another machine, or another drive in your computer to see if it works properly.

  If your hard drive and DVD/CD player are on the same parallel cable connection, it can cause problems as well.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/DVD-Rom will not read the CD

  I just upgraded from vista to windows 7 Home premium database on my laptop and now my CD-DVD-Rom will not read any CD I put in the drive. He reads that DVD very well so I'm up for a loop now. My drivers are all far better that I can find. I know it's a CD-DVD-Rom, because before I updated I had no problem reading CDs and DVDs. This is a problem because all my anti-virus and other programs are all on CD. I don't know how to fix this. Any suggestions would be greatly appreciated.

  -Thank you

  Thanks for the post with suggestions. I have tried it all and still had the same problem. I called Dell and got the laptop computer and an hour with a tech restarted my computer and try to fix it, they decided that something in the upgrade process damaged my CDRom and they sent me a new to replace my current one. I'll get it Tuesday and weather post or not, that is the question. Just in case where there are other people out there who might have the same problem.

  -Thank you again for your help

• E T5226 machine will not read the SD,.

  E T5226 machine will not read the SD card, is there a driver for this problem? If I use a USB drive, the computer will read the card but when the SD reader support it don't read nor even appear in my computer screen.

  Using Microsoft windows 7 Ultimate

  Hi Larry,

  Thanks for posting your query in the Microsoft community!

  I understand that this E T5226 machine won't read SD card. I will try to help you with this.

  (1) did you make any changes before the show?

  (2) you receive an error message/code?

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  i. click on start, type devmgmt.msc and then on enter.

  II. research the name of the device

  If the device is not detected in Device Manager, and check if it is the hidden device.

  i. click on view under view hidden devices

  II. develop all winks in Device Manager

  III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.

  2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. check if it works.

  Downloads & Documents - Support Desk / series T / T5226

  http://support.gateway.com/us/en/EMAC/product/default.aspx?modelId=1626

  Link: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Installing the driver in compatibility mode:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on the other computer.

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.