My HP1022 prints but ends with flashing lights

Similar Questions

• HP61-322N R ~ screen stays black at startup with flashing lights (capslock & liked keypad)

  I am pretty illiterate with a lot of the terminology, I am self-taught, so please dumb it down a bit.

  My husband took my computer laptop yesterday outside to clean the fan (it was overheating to the point of burning to the touch and close several times a day, so I thought there would be a ball of hair there our dog, but not just a few thick layers of dust). We cleaned, kept track of everything pretty well, he promised that he put everything back as it was - he is experienced with disassembly macbooks and other laptops we have owned to clean the fans without problem. He has taken apart again for each connection was insured, but the question remains.

  When we tried to turn it on, it sounds very well in what concerns the normal startup but the screen remains black and the caps lock light and a light on the number btwn keyboard end & pg key to blink slowly home.

  I looked, but nobody seems to have this exact problem - I did unplug, remove the battery, put the power for 20 sec plug, then power on without battery- but which did not help of course.

  I need a solution in order to save them on a hard drive and at least get a new laptop, as is the plan I had for months with this intense overheating problem. Has happened for at least two years or maybe even since we purchased in Nov 2009. Also, it seems absolutely crazy and stupid to block most of the fan with a speaker, among other things. His is no longer a mystery why I burned by this thing - seriously I could scramble the eggs with the HP thing.

  If I can't get the screen for good work, I can handle this, but I need to connect it via hdmi on my TV as a last resort to save them on my hard drive until I have trash the pos.

  OK, thanks for your help with flashing lights in codes, and although he was not really the key to this problem, I have solve my problem.

  We finally got to work this morning

  There had been flashes two times (several times) while the article says BIOS corruption - which does not make sense to me, but all of a sudden my husband thinks aloud that he may have changed the cards memory when assembling it back together.

  The key here is that if you took it apart and the screen will start - you has NOT put it back together properly and you, as I, probably shouldn't be disassemble computers

  Use your smart phone to take photos of each important step to dismantle everything.

  Once he came back, he also realized that they were not completely locked into the slot so maybe it was they key and maybe it doesn't matter what order they were but try both the cards memory switch disconnected and reconnected the if you experience this problem.

  Otherwise, follow the guides the person provided in their response. My problem was strictly material.

  Good luck

• Does not print to Deskjet 3930 flashing light and all of a sudden!

  Hello, newbie here, the first time on this site (it's amazing how this small printer was!).  Had this printer for years (please don't laugh it's how old).  It was printing fine, never a problem with her all these years.  Then all of a sudden, my son tried to print something and the printer turns on, sounds like it is printing from the beginning, but then just blink.  I tried new ink cartridges, unplugging, resetting the print queue, downloading and installing software HP Print doctor.  Nothing.  One day we just fiddled with it by opening and closing top a whole bunch of times, turning on and outside (no real procedure) and voila, it started but then stopped at half way through.  So we opened and closed in on the top and he finished print perfectly!  Then he had no problems printing, but only if you keep printing immediately.  The next day, we needed to print again and back to the same problem.  It will not be printed, continues to add to the queue printing and the green light stops flashing.  What could be?  Please don't tell me to buy a new printer, I have new ink for this printer and I love how small and compact and simple to use.    It of as if there's a thing with it now or something.  Thank you.

  Hello

  Try the steps as shown in the below mentioned documents.

  Document 1

  Document 2

• Printer does not print. All the flashing lights

  HP 1300 printer has stopped printing.  All the lights flash.  any advice?

  If your printer is a HP LaserJet 1300 so please see if it helps:

  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=238320&prodTypeId=18972&prodSeriesId=238320&objectID=c00003059 .

• help with flashing lights

  tried to turn on my 4 k xbr65x900a and all I get is 4 flashing red flags and rehearsals flashing all the seconds. At this point I can just unplug the tv to get rid of the flashing. any help will be great. 4 k tv bought in November of 2013

  You posted the same question in two different threads.

  A possible soluition could be a full factory reset, since you said you tried to unplug and it does not solve the problem.

  Read this and click the links for factory reset:

  http://community.Sony.com/T5/4k-ultra-HD-TV/my-TV-Don

• My macbook pro was factory reset and now it lights up with flashing? And when I go beyond that to choose the network but I can't go beyond that

  My Mac Pro was factory reset now it is coming with flashing? And when if and when I passed it will choose the network and I can't go beyond what I'm doing

  The flashing? the Mac is to tell you that it is unable to produce a valid system for starting.

  Try to make a recovery of the internet start-up as described in OS X: on OS X Recovery - Apple Support

  Looks like your hard drive is dead.

  I hope that you have a backup.

• My printer does not respond. When it comes on, I get a series of flashing lights.

  problem with my printer

  I have problem with my printer when turning on green light start after the amber light flashes 5 times and green again, I am trying to disable and troubleshoothing but nothing happened

  Hi Erikainfante pizarro,

  ·         What operating system is installed on your computer?

  ·         What is the brand and model of the printer?

  ·         What happens when you try to print? You receive an error message or error code?

  Please answer the following questions so that we offer in addition to the steps to solve the problem of troubleshooting.

  You can run the troubleshooter printer and check if it makes a difference.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems

  You can also see the article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.

• HP Deskjet 6980 "Incompatible print cartridge" & flashing light

  I had without trouble for about 5 years, up to what this problem occurred recently in the blue.  I installed a new cartridge color #97 about 2 months ago and it worked fine for a few weeks until one day, he decided that I had an Incompatible cartridge.  I found info on the HP support pages and followed all these instructions.  The first time, I just pulled out of the cartridge & put again & it worked for a few prints then stopped.  So I did the cleaning with water distilled with great care.  He printed a test page, but then began to light flashing and same error message.  I took out the color cartridge to print everything in shades of gray and no ink comes out on paper. When I click on the printer, open the staus it says "finished printing" (or somethig to this effect).  IM using a mac mini & don't have not updated my OSX yet ~ 10.5.

  Can I return the cartridge to the store 2 months, but there is still a lot of ink insde.  Y at - it patches others? I'm really not more money for another cartridge flat and have this happen.  ISIT the time of a new printer?

  Thanks in advance.

  HI - you have definitely found the right document.  A couple of other things I recommend trying that I do not believe that the document covers.  First of all, off the printer with the power disconnected at the back of the printer, I would like to clean the contacts in the printer carriage.  Looks like the doc made reference to just clean the contacts of the cartridge.  I would also clean the cartridge contacts and transport black if you have not already.  If this does not resolve the problem, I highly recommend the back of the cartridge and try again.  If this does not resolve the problem, it's probably time for a new printer or get it repaired.

  Hope that helps.

• DEAD-END ADOBE FLASH PLAYER 11 BUT NO PIC.

  DEAD-END ADOBE FLASH PLAYER 11 BUT NO PIC.   ALL THE PROGRAMS I'M LOOKING AT SAYS I NEED FLASH PLAYER 11, I HAVE SO INSTALLED SUCCESSFULLY BUT STILL ASKING ME TO INSTALL PROGRAMS.

  Hello

  Check with Support Adobe and their forums.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ------------------------------------------

  You may need to uninstall Flash Player and reinstall.

  How to uninstall the Adobe Flash Player plug-in and ActiveX control - download utility uninstall
  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Troubleshoot Flash Player installation | Windows
  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Or

  Download Revo Uninstaller - free Version - and use it to uninstall Flash
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Reset

  Now try Flash:

  Download Flash Player (do not install the Google toolbar unless you really want to).

  http://get.Adobe.com/flashplayer/

  or:

  Test of Shockwave and Flash players
  http://www.Adobe.com/Shockwave/welcome/

  http://www.Adobe.com/software/Flash/about/

  ---------------------------

  If there are still problems when running Flash Player:

  Troubleshooting drive stabiility and performance
  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Flash Player Support Forums<-- more="" knowledgeable="" flash="" player="" help="" available="">
  http://forums.Adobe.com/community/webplayers/flash_player

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  I left by mistake a USB in the port when I restarted my computer (Windows 7).

  Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.

  How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?

  Thank you.

  Tried that, but it did not work.  Finally got and IT guy come and it took him 3 1/2 hours to repair.

  Need a bootable floppy which has then repairs itself.

  Lesson learned.  Have an available for each computer startup disk.

• When you print pages in Internet explorer 9, the color is good, but black is extremely light

  When you print pages in Internet explorer 9, the color is good, but black is extremely light (Please note-not the toner) led 2135cn MFP color lazer

  Hello

  Thanks for asking! If I understand correctly, you are facing problem with printing from Internet Explorer, which prints very light black color.

  Before you continue troubleshooting, I would get the little information.

  1. have there been recent changes to the system before the show?

  2 is the issue limited to printing through Internet Explorer?

  3 are you facing this problem with any specific Web sites?

  4. do this problem occurs when you print through the files/applications?

  5. have you checked for ink levels?

  It seems to be that the ink in the cartridge must be completed. In the meantime I suggest you carry out these methods.

  Method:

  Follow the link and run the troubleshooting printertroubleshooter. Check if it helps.

  For additional information refers: link 1,link 2,link 3     

  Answer us with the results. I'd be happy to help you further.

• C4680 flashing light and sound with Mac OS x 10.6.8 and USB connection

  Printer and light beeps flashes when asked does not print.

  When I opened the door of the cartridge, ink cartrideges will not move.

  Power levels when I check in the printer utility are ok.

  When I unplug to reset then reconnect to power, by flashing and beeping resumed. I unplug the night so I can sleep, and in the morning when I plug it, it beeps and flashes.

  Have tried to reinstall the printer on the Mac OSX.6.8 OS. Always beeps and flashes.

  When trying to print, get message the printer offline.

  If I go to system preferences and open the print and fax, the printer finally hiccups, even if beeping, goes to the line and prints.

  After 5 minutes, it starts to beep and flashes again.

  I would appreciate ideas... I worked through this aqppears troubleshooting guide if I search "flashing lights" and printer just keeps beeping and flashing.

  It looks like a hardware problem, I will consider the question more away, but if a sensor is damaged, then that could lead to these issues.

  I would also like to check this site for possible updates:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3739150#N303

  -Spencer

• try to export a video clip, but it's not compatible with flash player 17. Help?

  I'm trying to export a video clip, but it indicates that it contains features that are not compatible with flash player 17 and don't work every time, I tried exporting in different ways and using parameters different flash player, but nothing seems to work. It displays a message at the bottom of the screen, but I don't know how to solve this problem. Once I have try to export the adobe media encoder file opens and shows me a video file, but it lacks almost everything I did and is not what I'm trying to export. I hope you can help, thanks Caitlin

  You cannot export the integrated H.264 video. If you try to put animations on top of some videos, do export you already, but it does not send through Adobe Media Encoder. There is also a checkbox to ignore the color of the scene and to generate an alpha channel. Do it too. You should end up with a MOV file that can sit on top of the original video, click, in After Effects or Premiere.

• Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash

  Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash. I use a dell high spec, less than a year using windows 7 Home premium processor Intel (r) Pentium (r) CPU P6100 @ 2.00 GHz, 1999 Mhz, 2 Lossnay, 2 logic and McAfee Firewall and AV processors

  Thank you so much for pointing me in the right direction... Unfortunately, the link does not work but I bypassed using a part of the link, I did a search on google and found the plugin here. Adobe.com/Get/flashplayer/Current/install_flash_player.exe

  Thank you so much,.

  Johnny 777777

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X