My HP7520e printer stop working and market indicators.

Similar Questions

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• When I install IE9, my printer Canon wireless stop working and more shows on my network

  When I install IE9, my printer Canon wireless stop working and more shows on my network, accordingly. I am reluctant to reinstall IE9... of ideas? I use Windows Vista

  Hello
  • You receive an error message when printing?
  • What is the model of the printer?
  • Do you still have Internet Explorer (IE) 9 installed on the computer or you have returned back to IE 8?

  If you have IE 8 then I suggest you to install IE9 and check the error message when you try to use the Canon printer.

  You can also follow these links:

   
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
   
  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• Get pop-up Microsoft that says: "print filter Pipeline host Stopped Working and was closed.

  Original title: the printer does not work

  Cannot print from any application. Get pop-up Microsoft that says: "print filter Pipeline host Stopped Working and was closed.

  Ron BakerSA,

  Try to read This THREAD

  Rick

• Microsoft Windows Spooler SubSystem App stopped working and was closed, rises whenever I starts and sometimes my printer driver or the printer disappear!

  Whenever I start my computer when desktop comes up, I get this msg from Microsoft Windows: Spooler subsystem App stopped working and was closed. Most of the time I can still print but occasionally (when I need to print) my printer is missing, and the driver is not installed it is said. I got my printer mfg reinstall constantly for the last 2 weeks because of this problem! Peut anyonehelp!

  Try this:

  http://support.Microsoft.com/GP/printing_problems

• The printer status window Interface stopped working and was closed. How can I fix it?

  When I try to print I get the following message from Microsoft Windows: Printer Status window Interface stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  I have never received a Windows solution.  Once I have selected an email or other document to print and then click on print, nothing happens.  I then log out of windows and then reopen in an and the document will be printed.

  How can this problem be fixed?

  Hi all!

  This is usually resolved with a driver updated from the manufacturer.
  I highly recommend updating the driver to see if that takes care of the issue. If you need help, find the driver for your printer, please provide the make and model and I will do my best to find the right one for you.
  Thank you for using Microsoft Answers!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer stops working after update to the Capitan AE

  My Epson AcuLaser M1400 work properly with my previous Mac OS.  Once I have updated to the last, the printer stops working.  When I print a document, the printer stopped - "filter" has crashed.  A problem of 'sehr4ap supposed to quit' report pops up and clicked OK, let it go to Apple.  What is a possible solution to this problem?  Thank you!

  If you have verified that you have the latest drivers installed,

  in SystemPreferences-> printers and Scanners remove the printer with the sign less below.

  Then re install the printer (with the plus sign).

• 1510: new scan printer stop working

  Even after my scan printer stop working. I have scan doctor and it does not find the connected scan

  What can I do, whenever I want to use it, it never works

  Welcome to the community of HP @pete121222,

  I understand that you have lost the connection to the scanner to your HP Deskjet 1510. I'll be happy to help you.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  HP printers - WIRELESS card Scanner is lost (Windows)

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• manages scheduled tasks has stopped working and was closed

  Lately I get this error message often when I start using my Vista PC (Vista Business SP2) in the morning: "manages scheduled tasks has stopped working and was closed".

  And this morning the automatic update of Windows Defender definitions also could not install (so I would be dnld and installed).  Set to automatic update referred to 'unknown error' (8 and 57, I think).

  FYI, sfc/scannow reported no integrity violoations with system files.  I also reconfigured my PC there is to make sure that it is clean, fresh and perfectly up-to-date before reinstalling all my apps, and it's been updated for about 2 months then.

  How this application problem "manages scheduled tasks" can be fixed?  If you don't know, where can I get an answer?  Neither Google nor Bing seem to show any reference to the exact phrase "" manages scheduled tasks has stopped working stopped working '. "

  Craig in New Jersey

  Update 7/22: I'm starting to suspect a problem of interactions between turn off Vista and [printer] HP Digital Imaging Monitor.  I tried to disable it via msconfig, a couple of days and have not seen the mistakes regularly ever since, but the jury is still pending for another week or two.   I'll report after awhile.

  It is too early to point a finger because we know that all of them have well worked normally in the past and they seem equally at risk of corruption.  For example, I have no these errors when you use the same software HP on my Win7 PC and I don't have these errors for a few months after that the reconstruction of my Vista laptop, so I'm suspecting some piece of software has become corrupted (something in Vista), or something the tracking software program, some windows or component or registry setting software execution to one who relies on the HP printer.

  Craig in New Jersey

  Update 7/27 edit: Since disabling component HP Digital Imaging Monitor (hpqtra08.exe) drivers HP printer/scanner more than a week ago, I have not seen error messages 'has stopped working and was closed"breed, and Windows Update seems to operate normally.

• Spooler subsystem app stopped working and was closed.

  When spooler subsystem app stopped working and was closed, which is causing this problem and how can I reinstall it and continue to use my computer, I installed a new program on my computer?

  Hello
   
  1. What is the name of the program you are trying to install?
   
  2. you receive an error code?
   
  3. what happens when you try to print?
   
  Refer, http://TechNet.Microsoft.com/en-us/library/cc766474%28V=WS.10%29.aspx
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  In Windows Vista:
   
  a. click on start
   
  b. click Control Panel, click programs and features,
   
  c. click on Turn Windows features on or off, expand Print Services, clear the LPR Port monitor check box and select the Internet printing Client, and then click OK.
   
  If the steps are still not then continue to.
   
  Method 2
   
  This problem may occur if a printer driver that is installed on the computer is damaged.
   
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  322756 how to back up and restore the registry in Windows
  To resolve this issue, delete the printers and drivers for printers, then remove the items that are under certain keys in the registry. Follow these steps:
   
  a. If possible, remove all of the printers that are listed in the Printers window.
   
  To remove a printer, right-click the printer in the Printers window, click Remove, and then click Yes to confirm the deletion.
  
  (b) in the Printers window, on the file menu, click Server Properties.
   
  c. on the tab drivers, remove all the installed printer drivers.
   
  d. to remove a printer driver, click the driver, click Removeand then click Yes to confirm.
  
  Start the registry (Regedit.exe) editor.
   
  (e) export the following registry keys:
      HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print
     
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print
     
  f. remove all items listed under the following keys (do not delete the keys themselves):
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-2
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3
  
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-2
  
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-3
  
  g. remove all items listed under the following keys by default:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
     
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Monitors
  
  The list of default monitors includes:
  AppleTalk printing devices (when Services for Macintosh is installed)
  
  BJ language monitor
  The local port
  PJL language monitor
  Standard TCP/IP port
  USB Monitor
   
  
  "Windows NT Fax Monitor (if a Fax Modem is installed)"
   
  For more information on the items are not by default, click on the number below to view the article in the Microsoft Knowledge Base:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  
  h. remove all items listed under the following keys:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
     
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Printers
  
  I. close the registry editor.
  J. restart your computer and reinstall the necessary printers.
   
  I hope this helps.
   
   

• -Pop-up message each time I log in that says: "ntvdm.exe has stopped working and it will be stopped."

  Greetings, West this pop up message annoyng which continues to appear a little each time, even if after I start my computer. It is said "ntvdm.exe has stopped working and he will be shut down", I close the window and aparently everything works OK. But it continues to if at all times, is there any problem? Why does this happen? Can it be fixed and how?

  My computer has an Intel Core Duo 2 CPU E6550 2.33 GHz, with 2 GB of RAM and my OS is windows vista business SP1 32-bit.

  Thanks for any help,

  Pedro Borba

  original title: ntvdm.exe stop working and will stop

  SALAM... I SAW UR QUESTION... HOWEVER, I KNEW THAT U HAVE PROBLEM WITH UR PROCESSOR FAN... PLEASE CLEAN IT WITH WIND TUNNEL YOU CAN FIND IN THE MARKET... AND BIOS PLEASE INCREASE THE TOLERANCE OF UR CPU TEMPERATURE... MY BEING of VALUE to 50 AND UR PROCESSOR IS HEATING BETWEEN 45 AND 55 degrees. TRY IT INSHALLAH IT WILL WORK... HOPE SOLVE UR PROBLEM...

  MOHAMMAD TOUSIF

• That spooler SubSubsystem App has stopped working and was closed does mean?

  Spooler SubSystem App stopped working and was closed means.  I can't get my printer to print at all.  Not even a test page.

  Hello

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I got the error message "Spooler subsystem app stopped working and was closed".

  I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

  Hello

  You should probably check with Support from Adobe and their communities and Forums in case
  There are known problems.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ====================================

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Vista SP2 after installing Spooler SubSystem App stopped working and was closed

  After installing Vista SP 1 and 2 my printers no longer work. the message that I get when the computer is

  "Spooler SubSystem App stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  When I try to print it says I have to install a printer but then says turn the spooler.
  After turning on the spooler spooler turns his back on the coast.
  I tried to uninstall and reinstall printers, but it won't let me install printers.
  If I restore to previous date before installing SP1 and 2 printers work.

  Online, I see that many people have the same problem.
  I tried to contact Microsft but they tell me to contact HP
  and when I contact HP they tell me to contact Microsoft, as it was their problem
  I'm agree that Microsoft SP1 and 2 caused this problem.

  Hello Lonny Jones,

  Let's start by downloading the latest drivers and software from HP and see if that helps.

  When you install the drivers, it is important to perform the following actions:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Several references to printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers